Abstract:Purpose/Objective: MR and CT fusion with CT-based dose calculation has become a routine procedure for IMRT treatment planning. The purpose of this study is to investigate the clinical implementation of MRI-based treatment planning (MRI simulation) for prostate cancer. MRI simulation retains the superior soft-tissue contrast for image segmentation while eliminates the potential error in image fusion due to variations in patient position between CT and MRI and uncertainties in localizing the same structures between the two data sets. Furthermore, MRI simulation will avoid redundant CT imaging sessions, which in turn will avoid unnecessary radiation exposure to the patient, reduce treatment cost, and save patient, staff and machine time. Materials/Methods: A 0.23 T open MR scanner (Philips Medical Systems, Cleveland, OH) was used for this study. Patients were scanned in a supine position in an alpha cradle with knee support and foot holder. One axial reference T2-weighted MR image was obtained with three donut-shaped fiducials on the skin to mark the approximate center of the prostate. A saggittal image was obtained through the center of the prostate as depicted on the axial image. The fiducials were then adjusted to mark the isocenter using a set of trackable lasers. The MRI data consisted of 48 slices (3-mm thickness) covering the whole pelvis. Skin marks were then made for daily treatment setup. The MR images were post processed using a gradient distortion correction (GDC) program provided by the vendor. The prostate and other critical structures were contoured and then transferred together with the MRI data to a commercial inverse planning system. Twenty IMRT plans were made using both unit density MRI and CT with the same beam angles, dose constraints and optimization parameters and the resulting plans were compared in terms of isodose distributions and dose volume histograms (DVH). A hybrid plan is generated for both the CT-based plan and the MR-based plan using the leaf sequences and associated MU designed for the corresponding patient plans. The physical phantom is then irradiated using the same leaf sequences to verify the dosimetry accuracy of the treatment plans. Results: Donut shaped fiducial markers worked well in isocenter localization since the center of the fiducial marker could be clearly determined in one MR slice. The CORVUS treatment planning system (version 5.0) allowed dose calculation on both CT and MRI. Small discrepancies (3–5%) in structure volumes were observed between CT and MR due to image resolution and algorithmic differences in volume determination. Small (∼1.5 cm) differences were also found in external contours between CT and MRI due to residual MRI distortion, which resulted in some differences in intensity maps. However, the final dose distributions were equally acceptable based on our clinical criteria (e.g., V95 = 100% of the prescribed target dose, R40 < 35%, R50 < 17% of the rectal volume, etc.). The absolute dose agreed within 3% between measured dose and dose predicted by the planning system in the physical phantom. The BAT ultrasound system was used for daily target localization and a MRI based DRR was used as a reference to assist setup verification. Conclusions: Our results showed that MRI-based simulation meets the accuracy requirement for patient setup, image segmentation, dose calculation and treatment verification for prostate treatment. Commissioning and quality assurance procedures have been developed for MRI simulation and are being implemented clinically for prostate IMRT at this institution.

Study of scanning method of T 1WI_Star_VIBE_FS in MRI simulation of neck radiotherapy

Comparison of Computed Tomography and Magnetic Resonance Imaging in Cervical Cancer Brachytherapy: A Systematic Review.

Study on the Optimized Scanning Conditions of Cerebral CT Angiography Based on the Angiographic CT Head Phantom

Comparison of Computed Tomography- and Magnetic Resonance Imaging-Based Target Delineation for Cervical Cancer Brachytherapy

A feasibility study on “Tri-Low” technology in combination with iterative model reconstruction (IMR) algorithm in CT angiography(CTA) of the head-and-neck vessels

The effects of joint optimization of CT scanning-modes and CT angiography starting-modes on image quality and patients' radiation dose in cervicocerebral CT angiography

Added Value of T 1-Weighted StarVIBE Sequence for PET/MR Image Quality

Using MRI simulation in radiotherapy of lung cancer with post-obstructive lobar collapse:a preliminary study

Applications of Three Newer Contrast-Enhaced MRI Sequences in the Diagnosis of Intracranial Tumors

Image Quality Assessment of Brain CT with Different Scanning Modes

Evaluation of Postcontrast Images of Intracranial Tumors at 7T and 3T MRI: an Intra‐individual Comparison Study

DCE-MRI of esophageal carcinoma using star-VIBE compared with conventional 3D-VIBE

Methods for Solving the Neck Two-Point T2-DIXON Fat-Water Separation Misalignment

Comparatire study of enhanced MRI with combined non-enhanced MRI sequences in screening of breast lesions

Role of Large-Diameter MRI Simulation in Target Volume Delineation in Radiotherapy for Nasopharyngeal Carcinoma

Comparative Study of Radiation Dose and Image Noise Between Single-Source Fast Kilo Voltage Peak Switching Technique and Conventional Mode on Abdominal CT

Clinical image quality evaluation and comparison between different MRI equipment in the central nervous system

Clinical implementation of MRI simulation for IMRT of prostate cancer

Optimal Virtual Monoenergetic Image in “twinbeam” Dual‐energy CT for Organs‐at‐risk Delineation Based on Contrast‐noise‐ratio in Head‐and‐neck Radiotherapy

A New Approach to Research Graphical Performance of MRI RF Coil Based on the Quantitative Comparison Method

SU-GG-I-17: Comparison of Different Onboard CT Techniques for Image Guided Radiation Therapy (IGRT)