Abstract:The National Synchrotron Radiation Laboratory is planning to build a 2.2 GeV diffraction-limited storage ring, the Hefei Advanced Light Facility (HALF), with a 6BA lattice structure and a large number of longitudinal gradient bends (LGBs). In order to increase the radiated photon energy to the hard X-ray band and to reduce the natural emittance, a superconducting longitudinal gradient bend (SLGB) magnet is planned to be used on HALF in the future, which requires a magnetic field integral of 0.40 T center dot m over a length of 0.46 m and a peak field of about 5 T. A SLGB has many structural parameters, such as the geometric parameters of the superconducting coils and the thickness of the yoke, etc. Their influence on the magnetic field distribution has been studied, although the computation of the 3D magnet model is very slow. Considering the longitudinal field variation, the vertical gap limitation, the field homogeneity requirement and the critical current of the superconducting wire, a method is developed to simplify the 3D magnet simulation by a corresponding 2D model, so that the longitudinal magnetic field profile of a 3D model can be approximately calculated in a 2D model with faster speed. Due to the faster calculation speed of 2D models, a Mathematica-based optimization program is developed and relatively good structural parameters for the HALF SLGB are found by the program. The simulation results show that the physical design requirements can be well met. The electromagnetic design for the HALF SLGB magnet is based on the current ???? level of NbTi superconductor due to its excellent mechanical performance.

Nonlinear kicker design and research for Hefei advanced light facility

A Novel Kind of Nonlinear Kicker for the Hefei Advanced Light Facility

Development of a stripline kicker for the Hefei Advanced Light Facility

Finite Element Analysis for NEG coated vacuum chamber based on ANSYS Workbench

A 300 mm Long Prototype Strip-Line Kicker for the Heps Injection System

Beam Injection Using a Nonlinear Kicker for the HLS-II Storage Ring

Design and tuning of S-band traveling wave accelerating structures for Hefei Advanced Light Facility

Design Study of a Fast Kicker Magnet Applied to the Beamline of a Proton Therapy Facility

A Waveguide Overloaded Cavity Kicker for the HLS II Longitudinal Feedback System

Model and Analysis of Eddy Current of Ferrite-dominated Kicker Magnet in Hefei Light Source Ring

Design and Optimization of a Longitudinal Feedback Kicker Cavity for the HLS-II Storage Ring

Development of a High-repetition-rate Lumped-inductance Kicker Magnet Prototype for the Beam Switchyard of SHINE

A Novel Non-Linear Strip-Line Kicker Driven by Fast Pulser in Common Mode

Design and Simulation of Stripline Kicker for HLS Ⅱ Transverse Feedback System

Design and Characterization of a Kicker for the Tsinghua Thomson Scattering Storage Ring

Status of Multipole Magnets for Hefei Advanced Light Facility

Design and offline tests of a resonant stripline cavity kicker for longitudinal feedback in the HEPS Booster

Optimization Design of a Longitudinal Kicker for a Beam Feedback System

Study of a 560-mm-long stripline kicker for HIT 10 MeV electron accelerator

Electromagnetic design study of a superconducting longitudinal gradient bend magnet based on the HALF storage ring

Physical and Structural Design of Fast Extraction Kickers for CSNS/RCS