Experimental Investigation and Simplified Prediction Model Study of Internal Solitary Wave Forces on FPSO

张瑞瑞,尤云祥,陈科,季梦
DOI: https://doi.org/10.3969/j.issn.1007-7294.2021.06.003
2021-01-01
Abstract:The forces exerted by internal solitary waves (ISWs) on FPSO were investigated. A series of depression ISWs were generated by a double-plate wave maker in a density stratified two-layer fluid within a 30-meter-long wave flume. The forces on a fixed FPSO model were measured. Combined with the laboratory experiments, a numerical flume taking the applicability of ISWs theories into con-sideration was adopted to study the force components. Based on the experimental data and the force composition, the theoretical simplified prediction model for FPSO ISW loads was established. It is shown that the horizontal load consists of two parts:the Froude-Krylov force, which can be calculated by integrating the dynamic pressure induced by ISW along the FPSO wetted surface, and the viscous force, which can be obtained by multiplying the friction coefficient Cf, correction factor K and the inte-gration of particle tangential velocity along the FPSO wetted surface. The vertical load is mainly the vertical Froude-Krylov force. It is concluded from the experimental results that the friction coefficient Cf and correction factor K are regressed as a relationship of Reynolds number Re, Keulegan-Carpenter number KC and layer depth h1/h. Moreover, the friction coefficient Cf follows the natural logarithmic function with Re, while the correction factor K follows four power function with KC number. The force prediction was also performed based on the regression formulas and pressure integral. The predicted results agree well with the experimental and numerical results. The maximum forces increase linearly as the ISWs amplitude increases. Besides, the upper layer thickness has an obvious influence on the extreme value of the horizontal forces.
What problem does this paper attempt to address?