Abstract:The cyclonic microbubble flotation column is an efficient separation equipment in the beneficiation process of metallic and non-metallic minerals. However, the higher detachment rate of coarse particles in the pulp, pulp-froth interfacial zone, and froth zone is an issue that needs to be addressed urgently in column flotation. Compared with traditional air-water bubbles, oily bubbles have higher hydrophobicity, which is beneficial for strengthening the bubble-particle attachment and inhibiting the bubble-particle detachment. Therefore, oily bubbles were introduced into the cyclonic microbubble flotation column to reduce the particle detachment rate. Firstly, an improved cyclonic microbubble flotation column was set up, and traditional air-water bubbles were placed by oily bubbles through the combined use of an atomizer and a bubble generator during experiments. Subsequently, we investigated the feasibility of using oily bubbles as a flotation carrier to regulate the particle detachment rate, improve the particle recovery, and explore the mechanism behind this. Column flotation results showed that recovery rates generated from experiments with oily bubbles are higher than those with air-water bubbles under different operation conditions, and the particle detachment rate in the interfacial region was significantly reduced with the use of oily bubbles. Recoveries and flotation rate constants generated from collection zones for each particle size range indicated that the use of oily bubbles can increase the upper limit of flotation particle size compared with the use of air-water bubbles. Calculated detachment rates showed that the use of oily bubbles can effectively reduce the detachment probability of particles with different sizes in the collection zone. Combined with the observation of ultrasonic-assisted oscillation, it is proved that the oil coating film on the oily bubble significantly improves the resistance of oily bubbles to turbulent disturbance. In addition, the increase in hydrophobic force between oily bubbles and particles and the growth of the three-phase contact periphery are beneficial to reducing the particle detachment probability due to turbulent disturbance in the collection zone. Results from bubble coalescence experiments showed that the existence of oily bubbles significantly reduced bubble coalescence time and increased the damping coefficient. Compared with air-water bubbles, oily bubbles have a stronger damping effect on the oscillation caused by bubble coalescence, inhibiting the violent bubble surface deformation and the induced particle detachment during bubble coalescence. Therefore, the introduction of oily bubbles is a promising idea to reduce the detachment probability of coarse particles and increase the upper limit of particle size in column flotation.

Research on Application of Hydrocyclone Microbubbles Generator in Flotation of Oil-Water Emulsion

Separation performance of hydrocyclone oil removal device influenced by oil droplet trajectory and oil drop characteristics

Microbubble-based process for the enhancement of microfine and heavy oil droplets swirl separation in axial inlet hydrocyclone

Microbubbles enhance oil-in-water emulsion separation in fibrous coalescers

Hydrodynamic Cavitation As an Efficient Method for the Formation of Sub-100 Nm O/W Emulsions with High Stability

Effective and low fouling oil/water separation by a novel hollow fiber membrane with both hydrophilic and oleophobic surface properties

Oil droplet movement and micro-flow characteristics during interaction process between gas bubble and oil droplet in flotation

Study on inhibition mechanisms of detachment of coal particles from oily bubbles in flotation column

Oil removing efficiency in oil–water separation flotation column

Recent developments in the application of membrane separation technology and its challenges in oil-water separation: A review

Separation characters of an axial-flow hydrocyclone with oil collecting pipe

Ultrafast sorption of micro-oil droplets within water by superhydrophobic-superoleophilic conical micro-arrays

Study on Oil Separation from Oil/Water Emulsion via Coagulation and Ultrafiltration

In Situ Microbubbles Electroflotation Enhanced Emulsion Separation and Membrane Antifouling Ability for Durable Oil-in-Water Emulsion Separation

In situ generated micro-bubbles enhanced membrane antifouling for separation of oil-in-water emulsion

Application of coagulation/flocculation in oily wastewater treatment: A review

Application of Cyclonic Floatation Integrated Technology in Low Oil Content Sewage Treatment

Numerical and experimental study on enhanced oil–water separation performance using hydrocyclone coupled with particles

Numerical simulation of the separation characteristics of oil droplets in swirling flotation based on CFD-PBM

Surface engineering of filter membranes with hydrogels for oil-in-water emulsion separation

Numerical study on the mechanism of microplastic separation from water by cyclonic air flotation