Abstract:Vortex pumps have good non-clogging performance and are widely used in the fluid transportation of food, sewage treatment, and mineral and coal slurry transportation. In order to design and manufacture a vortex pump with good performance and establish a method of optimum design, we must master the internal flow rules of the pump. Based on the self-design vortex pump (32WB8-12) experiment, the discharge-pump head (qv-H), discharge-pump shaft power (qv-P), discharge-pump efficiency (qv-η), and discharge-critical net positive suction head (qv-NPSHc) curves are obtained, and the qv-NPSHc curve shows an opposite tendency compared with the centrifugal pump. With the mathematical model selected with respect to the optimal condition, the three-dimensional internal flow within the vortex pump has been numerically simulated by a renormalization group k-ε (RNG k-ε) turbulence model. The static pressure (ps) and velocity distribution of the impeller and the middle section of the volute at 0°, 90°, 180°, and 270° are obtained, and the performance curves have been fitted using a CFX-calculated energy parameter. It was illustrated that the velocity field is relatively disordered and the flow in the impeller region is of a forced vortex character. The flow in the volute is similar to that of the combined vortex with backflow, which is a non-axisymmetric unsteady flow with quite high turbulence intensity. These factors are the main reasons for the relatively low efficiency of the vortex pump. The measurement of flow field in volute with a five-hole probe was conducted, and it is demonstrated that the numerical results are in good agreement with the flow field measurement data. An upward pressure gradient forms in the portal area of the impeller, and it is confirmed that the lowest pressure point is located in the upper position of the impeller hub. It is revealed that for the vortex pump to have advanced suction and anti-cavitation performance, the lowest pressure in the pump should be −4 × 104 Pa and it should be located at the center of the vortex chamber cavity.

Study on the Prediction Method and the Flow Characteristics of Gas-Liquid Two-Phase Flow Patterns in the Suction Chamber

Study on Gas–liquid Two-Phase Flow in the Suction Chamber of a Centrifugal Pump and Its Dimensionless Characteristics

Performance Prediction of Centrifugal Pump Based on the Method of Numerical Simulation

Analysis of flow characteristics in the volute casing of centrifugal pump based on numerical simulation

Experimental investigation of flow patterns and external performance of a centrifugal pump that transports gas-liquid two-phase mixtures

Numerical Calculation of Energy Performance and Transient Characteristics of Centrifugal Pump under Gas-Liquid Two-Phase Condition

Liquid-vapor two-phase flow in centrifugal pump: Cavitation, mass transfer, and impeller structure optimization

Numerical simulation and experimental study on gas–liquid two-phase unsteady flow in a centrifugal pump during the transition process

Gas–Liquid Two-Phase Performance of Centrifugal Pump Under Bubble Inflow Based on Computational Fluid Dynamics–Population Balance Model Coupling Model

Numerical Simulation on Internal Flow in the Screw Centrifugal Pulp Pump

The identification of gas–liquid two-phase flow patterns in a centrifugal pump with an imbalanced sample and variable rotational speeds

A Performance Test and Internal Flow Field Simulation of a Vortex Pump

Study on mechanism of unsteady gas-liquid two-phase flow in liquid-ring vacuum pump

Numerical Simulation of Gas–Liquid Two-Phase Flow Characteristics of Centrifugal Pump Based on the CFD–PBM

Numerical analysis of internal complex flow in a deep - sea gas - liquid two - phase flow multistage centrifugal pump

A Numerical Model for 3-D Gas-Liquid Two-Phase Flow in Vane Pumps

Numerical Simulation of Fine Particle Solid-Liquid Two-Phase Flow in a Centrifugal Pump

Unsteady Numerical Simulation for Gas-liquid Two-phase Flow in the Self-priming Process of Centrifugal Pump

Application of Two-Fluid Model in the Unsteady Flow Simulation for A Multiphase Rotodynamic Pump

Numerical Investigation of Gas-Liquid Flow in a Multiphase Pump with Special Emphasis on the Effect of Tip Leakage Vortex on the Gas Flow Pattern

Numerical simulation of unsteady flow in multiphase rotodynamic pumps