Abstract:The performance of the new generation aero-engine is strongly dependent on the application of integral blisk technologies, while the high-risk failure of integral disk joints severely restricts the promotion of those technologies. Therefore, the molecular dynamics method is used to investigate the influence of nanopores on the tensile properties of single crystal/polycrystalline Ni composites. The results show that the addition of single crystal nickel can increase the tensile strength of single crystal/polycrystalline Ni compared with polycrystalline nickel. The influence of pore position distribution on the tensile properties of single crystal/polycrystalline Ni is investigated. The simulation results show that nanopore defects in a single crystal region significantly aggravate the fracture at the single crystal/polycrystalline Ni interface. Pores not only penetrate the interface of composites but also rapidly expand inside the single crystal and the polycrystalline crystal, in which the interface of composites is further reduced resulting in the failure acceleration of single crystal/polycrystalline Ni composites. On the contrary, when the pores are in a polycrystalline region, the interface of single crystal/polycrystalline Ni hinders the amorphization of the polycrystalline nickel side and inhibits the pores from spreading toward the interface. When the pores are in the interface region, the pores do not continue to expand into the single crystal, but propagate inside the polycrystalline crystal. The effect of the porosity of interface pores on the tensile properties of single crystal/polycrystalline Ni is also discussed. It is found that the tensile strength of single crystal/polycrystalline Ni decreases rapidly when the void porosity exceeds 0.8%. Finally, the influence of the number of voids on the tensile properties while maintaining the porosity of the interface pores is analyzed. When the porosity of the prefabricated pores of the interface is kept constant at 0.8%, the larger the number of pores (i.e., the smaller the pores), the larger the elastic modulus. In the plastic deformation stage, due to the large number of dispersed small pore structures at the interface of the single crystal/polycrystalline Ni composites, the dislocation motion is hindered, which plays a certain strengthening role and improves the tensile strength of the single crystal/polycrystalline Ni composites. It can be concluded that single crystal/polycrystalline Ni with dispersed small pores has better tensile properties than those with large pores.

Intrinsic Toughness/Brittleness of Nanoporous Ag: Depending on Network Connectivity and Micro-Cracks

Bending Properties of Ag Nanowires with Pre-Existing Surface Defects

Understanding the Macroscopical Flexibility/fragility of Nanoporous Ag: Depending on Network Connectivity and Micro-Defects

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

The Morphology Control and Mechanical Properties of Nanoporous Ag

Fracture toughness and destructive mechanism of ductile nanoporous metallic glass and its crystal-impregnated nanocomposite

Effect of Nanopores on Tensile Properties of Single Crystal/Polycrystalline Nickel Composites

In-situ observation of crack propagation through the nucleation of nanoscale voids in ultra-thin, freestanding Ag films

Impact Analysis of Microscopic Defect Types on the Macroscopic Crack Propagation in Sintered Silver Nanoparticles

Influence of plasticity mismatch and porosity on mechanical behavior of nanoscale Ag/W multilayers

Mechanical Properties and Scaling Laws of Nanoporous Gold

Near-ideal Compressive Strength of Nanoporous Silver Composed of Nanowires

High tensile ductility in a nanostructured metal

Mechanical properties of unidirectional nanoporous gold under compression

Dynamic Characterization of Shock Wave Responses of Bicontinuous Nanoporous Amorphous Alloys: Microstructure Effects

Aggregation of nanoparticles and their effect on mechanical properties of carbon nanotube networks

Flaw-driven Failure in Nanostructures

Activating dispersed strain bands in tensioned nanostructure layer for high ductility: The effects of microstructure inhomogeneity

Make Nanostructured Metal Exceptionally Tough by Introducing Non-Localized Fracture Behaviors

Crack-tip plasticity and intrinsic toughening in nano-sized brittle amorphous carbon

Strengthening Modulus and Softening Strength of Nanoporous Gold in Multiaxial Tension: Insights from Molecular Dynamics