Abstract:Bicrystals serve as a simplified model system for studying the deformation behavior of polycrystalline materials. In this study, we fabricated graphene nanosheets (GNSs) reinforced copper (Cu) matrix laminated composites using electrophoretic deposition and subsequent vacuum hot-press sintering. Interestingly, the composite exhibited a bicrystal microstructure, with two types of adjacent crystals, i.e., denoted as crystal A (φ 1 = 222.06, Φ = 40.54, φ 2 = 82.5) and crystal B (φ 1 = 141.36, Φ = 43.76, φ 2 = 1.94), displaying a twin orientation relationship. To investigate the deformation behavior of the GNS/Cu composite, we conducted interrupted room temperature uniaxial tensile tests combined with Scanning Electron Microscope (SEM) Electron Backscatter Diffraction (EBSD) characterization. To identify the activated slip systems in the composites, we performed trace analysis, applied the Schmid Factor law, analyzed the deformation gradient tensor, and conducted intragranular misorientation axis (IGMA) analysis. The trace analysis revealed that slip systems with high Schmid Factor values were favored during tension. Moreover, the deformation gradient tensor elements of the primary slip systems in the two crystals confirmed the deformation features observed by SEM. However, crystal B exhibited a significant deviation in trace angle. Further IGMA investigation revealed that during tension, some slip systems, which were not favored by the Schmid Factor law, were also activated in crystal B. The activation of these slip systems in crystal B can be attributed to the large deviation in the trace angle. The findings in this work provide valuable insights for exploring the underlying deformation mechanisms in polycrystalline materials.

<i>In</i><i> Situ</i> TEM tensile testing of bicrystals with tailored misorientation angles

Coordinated grain boundary deformation governed nanograin annihilation in shear cycling

Inclination-governed Deformation of Dislocation-Type Grain Boundaries

Arrangement and Decomposition of Grain Boundary Dislocations: Two-Mode Phase-Field Crystal Simulation

Effect of Inclination Angle on Mechanical Behaviour and Deformation Asymmetry in Aluminium Bicrystal

In-situ Study of the Effect of Grain Boundary Misorientation on Plastic Deformation of Inconel 718 at High Temperature

Dislocation–grain boundary interaction-based discrete dislocation dynamics modeling and its application to bicrystals with different misorientations

Effects of crystallographic orientations and grain boundaries on nanoscratching behaviour of unique bi-crystal Cu

Phase-field-crystal Simulation of Nano-Single Crystal Microcrack Propagation under Different Orientation Angles

Simulation of bicrystal deformation including grain boundary effects: Atomistic computations and crystal plasticity finite element analysis

Deformation and boundary motion analysis of a faceted twin grain boundary

Phase Field Crystal Study of Grain Boundary Structure and Annihilation Mechanism in Low-Angle Grain Boundary

The Effects of Grain Boundary Misorientation on the Mechanical Properties and Mechanism of Plastic Deformation of Ni/Ni3Al: A Molecular Dynamics Study

The Interface And Surface Effects Of The Bicrystal Nanowires On Their Mechanical Behaviors Under Uniaxial Stretching

Identification of active slip modes in twinned bicrystals of GNS/Cu composite through intragranular misorientation axes analysis

Amorphous complexions alter the tensile failure of nanocrystalline Cu-Zr alloys

The impact of misorientation on the grain boundary energy in bi-crystal copper: an atomistic simulation study

Grain-orientation induced stress formation in AA2024 monocrystal and bicrystal using Crystal Plasticity Finite Element Method

The interaction between grain boundary and tool geometry in nanocutting of a bi-crystal copper

Grain Boundary Structure Dependent Fracture in Nanocrystalline Au Films

Lattice Rotation and Deformation Mechanisms under Tensile Loading in a Single-Crystal Superalloy with [001] Misorientation