Abstract:In this study gravity-driven membrane (GDM) ultrafiltration is investigated for the pretreatment of seawater before reverse osmosis (RO). The impacts of temperature (21 ± 1 and 29 ± 1 °C) and hydrostatic pressure (40 and 100 mbar) on dynamic flux development and biofouling layer structure were studied. The data suggested pore constriction fouling was predominant at the early stage of filtration, during which the hydrostatic pressure and temperature had negligible effects on permeate flux. With extended filtration time, cake layer fouling played a major role, during which higher hydrostatic pressure and temperature improved permeate flux. The permeate flux stabilized in a range of 3.6 L/m2 h (21 ± 1 °C, 40 mbar) to 7.3 L/m2 h (29 ± 1 °C, 100 mbar) after slight fluctuations and remained constant for the duration of the experiments (almost 3 months). An increase in biofouling layer thickness and a variable biofouling layer structure were observed over time by optical coherence tomography and confocal laser scanning microscopy. The presence of eukaryotic organisms in the biofouling layer was observed by light microscopy and the microbial community structure of the biofouling layer was analyzed by sequences of 16S rRNA genes. The magnitude of permeate flux was associated with the combined effect of the biofouling layer thickness and structure. Changes in the biofouling layer structure were attributed to (1) the movement and predation behaviour of the eukaryotic organisms which increased the heterogeneous nature of the biofouling layer; (2) the bacterial debris generated by eukaryotic predation activity which reduced porosity; (3) significant shifts of the dominant bacterial species over time that may have influenced the biofouling layer structure. As expected, most of the particles and colloids in the feed seawater were removed by the GDM process, which led to a lower RO fouling potential. However, the dissolved organic carbon in the permeate was not be reduced, possibly because some microbial species (e.g. algae) could convert CO2 into organic substances. To further improve the removal efficiency of the organic carbon, combining carrier biofilm processes with a submerged GDM filtration system is proposed.

Characterizing Spatial Distribution of Fouling on Flat-Sheet Membranes in a Pilot-Scale Gravity-Driven Membrane Reactor for Seawater Pretreatment

Performance and Membrane Fouling of a Step-Fed Submerged Membrane Sequencing Batch Reactor Treating Swine Biogas Digestion Slurry

Study on membrane fouling of submerged membrane bioreactor in treating bathing wastewater.

Optimization of Gravity-Driven Membrane (GDM) Filtration Process for Seawater Pretreatment.

Insights into the fouling layer of flat-sheet membrane and its development in an integrated oxidation ditch-membrane bioreactor

Improved Performance of Gravity-Driven Membrane Filtration for Seawater Pretreatment: Implications of Membrane Module Configuration.

Probing The Key Foulants And Membrane Fouling Under Increasing Salinity In Anaerobic Osmotic Membrane Bioreactors For Low-Strength Wastewater Treatment

Surface morphology of biofouling in membrane bioreactor treating actual sewage

Gravity-driven Membrane Reactor for Decentralized Wastewater Treatment: Comparison of Reactor Configuration and Membrane Module

A Deeper Investigation of Membrane Fouling in Anaerobic Membrane Bioreactors for Wastewater Treatment: Influencing Factors and Fouling Layer Characteristics

Gravity-driven Membrane Filtration As Pretreatment for Seawater Reverse Osmosis: Linking Biofouling Layer Morphology with Flux Stabilization.

The Influence of Membrane Surface Properties on Fouling in a Membrane Bioreactor for Wastewater Treatment

Transition of fouling characteristics after development of membrane wetting in membrane-aerated biofilm reactors (MABRs)

Characteristics and Fouling Behaviors of Soluble Microbial Products and Sub-Visible Particles in an Anaerobic Membrane Bioreactor Treating Sewage at Room Temperature

A comprehensive evaluation of the temporal and spatial fouling characteristics of RO membranes in a full-scale seawater desalination plant

Understanding the fouling characteristics in ultrafiltration membrane for marine algae-laden seawater pretreatment: Focus on the role of algal extracellular organic matter

The Performance and Spatial Distribution of Membrane Fouling in a Sequencing Batch Ceramic Membrane Bioreactor: A Pilot Study for Swine Wastewater Treatment

Elucidating biofouling development and succession in membrane distillation using treated effluent

Correlating Membrane Fouling with Sludge Characteristics in Membrane Bioreactors: an Especial Interest in EPS and Sludge Morphology Analysis.

Gravity-driven membrane coupled with oxidation technology to modify the surface properties and biofilm formation: Biofouling mitigation

Membrane Fouling and Cleaning in Anaerobic Flat-Sheet Ceramic Membrane Bioreactor for Sewage Treatment