Abstract:A comprehensive theoretical model for the primary breakup of liquid jets in subsonic crossflow was developed. The model theoretically analyzed the jet deformation process, mass stripping process, and the influence of several critical forces and consequently provided highly accurate predictions of the jet trajectory. Deformation of the liquid jet cross section was considered as a two-stage process based on the physical characteristics, including the spring-mass analogy deformation and the mass stripping induced deformation. The mass stripping process was modeled as an exponential function of time based on experimental findings for liquid jets and droplets. Balance of critical forces acting on the jet were analyzed, both along the gas and jet flow directions, which included aerodynamic drag, viscous force, surface tension, and gravitation. The model provided precise prediction to the jet trajectory against experimental data without any initial jet velocity assumption across a wide range of gaseous Weber numbers and gas to liquid momentum ratios. In addition, quantitative effects of viscous force, surface tension force, and aerodynamic drag on jet trajectory were fully investigated based on the new model, which provided more insight into jet breakup characteristics and the effects of fuel properties on jet trajectory and deformation. Furthermore, the three-dimensional structure of the jet was reconstructed through the present model, which matched well against numerical results. Importantly, the current mathematical primary breakup model could be integrated with Lagrangian methods, obtaining more detailed vortex structures and accurate droplet dispersion with reduced computational time.

Simple integral model for trajectories of jet deflection in crossflow

Computational Study of Lateral Jet Interaction in Hypersonic Thermochemical Non-Equilibrium Flows Using Nonlinear Coupled Constitutive Relations

Numerical Study of Violent Impact Flow Using a CIP-Based Model

Validation and Analyses of QCR Correction Turbulence Model in Sub-/Super-sonic Inner Flows

Application of simplified threeGequation transition model in hypersonic flow

Numerical Analysis of the Micro-Couette Flow Using a Non-Newton–fourier Model with Enhanced Wall Boundary Conditions

Primary breakup model development for trajectory prediction of liquid jets in subsonic crossflow

NUMERICAL PREDICTION OF A RECTANGULAR TURBULENT JET IN A CROSS FLOW

Numerical Simulations of Transverse Liquid Jet to a Supersonic Crossflow Using a Pure Two-Fluid Model

Flow Characterization and Modeling of Strong Round Synthetic Jets in Crossflow

Transverse Jet Interaction with Hypersonic Crossflow I: Experimental and Numerical Investigations

Flow Characteristics of Liquid Jet in Transverse Shear Crossflow

Numerical Study of Hydrodynamics of Multiple Tandem Jets in Cross Flow

Numerical Simulation for Transonic Flows at High Incidence Around a Complete Fighter with Two-Equation K-G Model

Numerical Simulation of 2D Jet-to-Crossflow Heat Transfer with Different Turbulence Models

Application of Turbulence Models in Simulation of Complex Flow-Fields

Numerical Study On Flow Characteristics Of A Single Jet And Multiple Tandem Jets In Crossflow

A simple analytical model for turbulent kinetic energy dissipation for self-similar round turbulent jets

A Data-Driven Reynolds-number-dependent Model for Turbulent Mean Flow Prediction in Circular Jets

Large Eddy Simulation of Energy Transport in Highly Compressible Transverse Jets

Analysis of the three-dimensional swirling and non-swirling jet impingement using a turbulence model with cross-diffusion correction