Improving Displacement Measurement Accuracy by Compensating for Camera Motion and Thermal Effect on Camera Sensor

Lei Xing,Wujiao Dai,Yunsheng Zhang
DOI: https://doi.org/10.1016/j.ymssp.2021.108525
IF: 8.4
2022-01-01
Mechanical Systems and Signal Processing
Abstract:Displacement measurement is a major concept in the daily maintenance and failure assessment of engineering structures. Vision-based systems offer a cost-effective, simple alternative for noncontact displacement measurement. However, its measurement is challenging because of the errors induced by camera instability (thermal effects on camera sensor and camera motion). Researchers have tried to compensate for the errors induced by camera instability in displacement calculation methods by placing fixed objects in the background. However, remotely-located objects in the background cannot fully allow for camera rotations. Supplementary sensors can be employed to measure the camera motion in six degrees of freedom (6-DOF), although this method is unable to compensate for thermal effects on camera sensor. This paper presents a dual-view system that can compensate for the camera instability by using a camera, a beam splitter, a convex lens, and a photomask. The beam splitter and convex lens enable the camera to capture dual-view data and measure the instability of the system by using the photomask. In laboratory tests, the Root Mean Squared Error (RMSE) of the displacements measured by the proposed system did not exceed 0.05 mm under the conditions of drastic temperature variations and strong winds. Outdoor tests showed that the reflection of sunlight on the objects will seriously affect the practical performance of the proposed system, and a robust localization method for the photomask is necessary. The measurement scheme design for the track structure vibration of high-speed railways proved the acceptable engineering practicability and installation flexibility of the dualview system.
What problem does this paper attempt to address?