Abstract:This study investigates the electrocatalytic reduction of nitrates using three novel electrodes: Cu@CNFs/NF, Cu@CNTs/NF, and Cu@CB/NF, synthesized via an impregnation-calcination-electrodeposition technique. The emphasis is on the role of different carbon materials, which serve as the base or matrix for Cu, and their influence on nitrate reduction and nitrogen selectivity. Experimental results indicated that all three-electrode variants outperformed the conventional Cu/NF electrode in nitrate reduction and nitrogen selectivity. Among these, the Cu@CNFs/NF electrode emerged as the standout performer, achieving an impressive nitrate reduction rate of up to 98 % and a nitrogen selectivity of 51 % under the optimized experimental conditions (pH 7, nitrate concentration of 100 mg center dot L-1 as NO3--N, a current density of 8 mA cm- 2, a sodium sulfate concentration of 0.5 g center dot L-1, 120 min, anode: Ti/RuO2-IrO2). Stability tests confirmed that the Cu@CNFs/NF electrode maintained over 97 % nitrate removal efficiency across ten cycles, highlighting its robustness and potential for practical water treatment applications. A significant enhancement in nitrogen selectivity of Cu@CNFs/NF to 96 % was observed when using 0.75 g center dot L-1 NaCl as the electrolyte during an extended electrolysis period of 180 min, underscoring its potential to optimize catalytic efficiency. Characterization data from SEM, XRD, and other analyses substantiate that the incorporation of carbon materials augments the active sites of copper; Nitrogen adsorption-desorption experiments further illustrate that the integration of carbon materials leads to an increase in mesoporous volume. This increase promotes adsorptive interactions, enhances the conversion of intermediates, and contributes to the improvement of nitrate reduction and nitrogen selectivity. These results highlight the potential of tailored carbon material integration for enhancing the electrocatalytic performance of electrodes in practical water treatment applications.

Selective Electrocatalytic Reduction of Nitrate to Dinitrogen by Cu2O Nanowires with Mixed Oxidation-State

In Situ Loading of Cu2O Active Sites on Island-like Copper for Efficient Electrochemical Reduction of Nitrate to Ammonia.

Direct Electron Transfer Coordinated by Oxygen Vacancies Boosts Selective Nitrate Reduction to N-2 on a Co-CuOx Electroactive Filter

Achieving efficient and stable electrochemical nitrate removal by in-situ reconstruction of Cu2O/Cu electroactive nanocatalysts on Cu foam

Novel Cu(I)/Cu(II) Oxide Nanowires Electrode with Efficient Cyclic Catalytic Performance for Electroreduction of Nitrate Wastewater to Ammonia

Electrochemical Reduction of Nitrate Via Cu/Ni Composite Cathode Paired with Ir-Ru/Ti Anode: High Efficiency and N2 Selectivity

High-Efficiency Electrocatalytic Reduction of N2O with Single-Atom Cu Supported on Nitrogen-Doped Carbon.

Self-supported Iron-Doped Cobalt-Copper Oxide Heterostructures for Efficient Electrocatalytic Denitrification

Self-supported Porous Copper Oxide Nanosheet Arrays for Efficient and Selective Electrochemical Conversion of Nitrate Ions to Nitrogen Gas

Selective Nitrate Reduction to Dinitrogen by Electrocatalysis on Nanoscale Iron Encapsulated in Mesoporous Carbon.

Electronic Structure Optimization and Proton-Transfer Enhancement on Titanium Oxide-Supported Copper Nanoparticles for Enhanced Nitrogen Recycling from Nitrate-Contaminated Water.

Efficient electrocatalytic nitrate reduction via boosting oxygen vacancies of TiO2 nanotube array by highly dispersed trace Cu doping

Efficient electrochemical nitrate removal on Cu and nitrogen doped carbon

Highly selective electrocatalytic reduction of nitrate to nitrogen in a chloride ion-free system by promoting kinetic mass transfer of intermediate products in a novel Pd-Cu adsorption confined cathode

Nano-Polycrystalline Cu Layer Interlaced with Ti3+-Self-Doped TiO2 Nanotube Arrays as an Electrocatalyst for Reduction of Nitrate to Ammonia

Electrocatalytic reduction of nitrate by copper/iron oxides supported on nitrogen doped carbon spheres

Efficient and Selective Electroreduction of Nitrate to Ammonia Via Interfacial Engineering of B-doped Cu Nanoneedles

Enhanced Electrocatalytic Nitrate Reduction Via Carbon Material Integration Between Cu and Ni-foam: Mechanisms and Performance Analysis

Electrocatalytic Reduction of Nitrate in Water Using Cu/Pd Modified Ni Foam Cathode: High Nitrate Removal Efficiency and N2-selectivity

On-Demand Atomic Hydrogen Provision by Exposing Electron-Rich Cobalt Sites in an Open-Framework Structure toward Superior Electrocatalytic Nitrate Conversion to Dinitrogen

Electrocatalytic Hydrogenation Boosts Reduction of Nitrate to Ammonia over Single-Atom Cu with Cu(I)-N3C1 Sites.