Abstract:Currently, coastal sandy soils face issues such as insufficient foundation strength, which has become one of the crucial factors constraining urban development. Geotechnical engineering, as a traditional discipline, breaks down disciplinary barriers, promotes interdisciplinary integration, and realizes the green ecological and low-carbon development of geotechnical engineering, which is highly important. Based on the "dual carbon" concept advocating a green and environmentally friendly lifestyle, Bacillus spores were utilized to induce calcium carbonate precipitation technology (MICP) to solidify coastal sandy soils, leveraging the rough-surface and low-permeability characteristics of silty soil. The mechanical-strength variations in the samples were explored through experiments, such as calcium carbonate generation rate tests, non-consolidated undrained triaxial shear tests, and scanning electron microscopy (SEM) experiments, to investigate the MICP solidification mechanism. The results indicate that by incorporating silty soil into sandy soil for MICP solidification, the calcium carbonate generation rates of the samples were significantly increased. With the increase in the silty-soil content, the enhancement range was 0.58–3.62%, with the maximum calcium carbonate generation rate occurring at a 5% content level. As the silty-soil content gradually increased from 1% to 5%, the peak deviator stress increased by 4.2–43.2%, enhancing the sample shear strength. Furthermore, the relationship between the internal-friction angle, cohesion, and shear strength further validates the enhancement of the shear strength. Silty soil plays roles in adsorption and physical filling during the MICP solidification process, reducing the inter-particle pores in sandy soil, increasing the compactness, providing adsorption sites, and enhancing the calcium carbonate generation rate, thereby improving the shear strength. The research findings can provide guidance for reinforcing poor coastal sandy-soil foundations in various regions.

Mechanical Performance of Biotreated Sandy Road Bases

Interface Shear Behavior Between MICP-Treated Calcareous Sand and Steel

Study on the Effects and Mechanism of the Reinforcement of Soft Clay Via Microbially Induced Carbonate Precipitation

Shear behavior of bio-cemented calcareous sand treated through bio-stimulation under the direct shear condition

Durability of MICP-reinforced Calcareous Sand in Marine Environments: Laboratory and Field Experimental Study

Effect of particle size and gradation on compressive strength of MICP-treated calcareous sand

Review of Strength Improvements of Biocemented Soils

Impact of New Combined Treatment Method on the Mechanical Properties and Microstructure of MICP-Improved Sand

Investigation of the effect of microbial-induced calcite precipitation treatment on bio-cemented calcareous sands using discrete element method

Shear Behavior of Biochar-Amended Biocemented Calcareous Sand Treated by Biostimulation

Experimental Study on the Mechanical Behaviors of Aeolian Sand Treated by Microbially Induced Calcite Precipitation (MICP) and Basalt Fiber Reinforcement (BFR)

Undrained cyclic responses of biocemented calcareous silty sand

Experimental Study on Enhancing the Mechanical Properties of Sandy Soil by Combining Microbial Mineralization Technology with Silty Soil

An Experimental Investigation on Use of Xanthan Gum Biopolymer as Additive for Improving the Reinforcement Effect of Biocementation on Sandy Soils

Thermal Conductivity of Biocemented Graded Sands

Review on geotechnical engineering properties of sands treated by microbially induced calcium carbonate precipitation (MICP) and biopolymers

Coupling effect of biocementation-fiber reinforcement on mechanical behavior of calcareous sand for ocean engineering

Compressive Strength of MICP-Treated Silica Sand with Different Particle Morphologies and Gradings

Effects of Different Types of Fibers on the Physical and Mechanical Properties of MICP-Treated Calcareous Sand

Performance Improvement and Microstructure Characterization of Cement-Stabilized Roadbase Materials Containing Phosphogypsum/Recycled Concrete Aggregate

3D DEM modeling of biocemented sand with fines as cementing agents