Abstract:We propose a novel multi-section cable-driven soft robotic arm inspired by octopus tentacles along with a new modeling approach. Each section of the modular manipulator is made of a soft tubing backbone, a soft silicon arm body, and two rigid endcaps, which connect adjacent sections and decouple the actuation cables of different sections. The soft robotic arm is made with casting after the rigid endcaps are 3D-printed, achieving low-cost and convenient fabrication. To capture the nonlinear effect of cables pushing into the soft silicon arm body, which results from the absence of intermediate rigid cable guides for higher compliance, an analytical static model is developed to capture the relationship between the bending curvature and the cable lengths. The proposed model shows superior prediction performance in experiments over that of a baseline model, especially under large bending conditions. Based on the nonlinear static model, a kinematic model of a multi-section arm is further developed and used to derive a motion planning algorithm. Experiments show that the proposed soft arm has high flexibility and a large workspace, and the tracking errors under the algorithm based on the proposed modeling approach are up to 52$\%$ smaller than those with the algorithm derived from the baseline model. The presented modeling approach is expected to be applicable to a broad range of soft cable-driven actuators and manipulators.

PDE Modeling and Control of a Cylindrical Soft Manipulator with Bounded Cable Tension

Nonlinear Pd Control of A Long-Span Cable-Supporting Manipulator in Quasi-Static Motion

Three-Dimensional Dynamics for Cable-Driven Soft Manipulator

PDE-based control synthesis for a planar cable-driven continuum arm

Dynamic Analysis of an Underwater Cable-Driven Manipulator with a Fluid-Power Buoyancy Regulation System

Distributed Parameter Modeling and Boundary Control of an Octopus Tentacle-Inspired Soft Robot

Dynamical Modeling and Control of Soft Robots with Non-constant Curvature Deformation

Dynamic control with tension compensation of a 3-DOF cable-driven parallel manipulator

Visual Servo Control Of Cable-Driven Soft Robotic Manipulator

Dynamic analysis and control of a cable-driven parallel manipulator considering cable vibration effects

Non-smooth Dynamical Analysis and Experimental Validation of the Cable-Suspended Parallel Manipulator

Boundary Control for a Rigid-Flexible Manipulator with Input Constraints Based on Ordinary Differential Equations–Partial Differential Equations Model

Dynamic Analysis of Cable-Driven Parallel Manipulators with Time-Varying Cable Lengths

Dynamic Modeling and Vibration Control for a Nonlinear 3‐dimensional Flexible Manipulator

Tension Optimization of a Cable-Driven Coupling Manipulator Based on Robot Dynamics with Cable Elasticity.

Dynamics and Nonlinear Control of a Cable-driven Parallel Robot

Dynamic Modeling and Experimental Verification of a Cable-Driven Continuum Manipulator with Cable-Constrained Synchronous Rotating Mechanisms

Coordinated Control of Flexible Cables with Human-Like Dual Manipulators

Design and Nonlinear Modeling of a Modular Cable Driven Soft Robotic Arm

A Novel Cable-Driven Manipulator with Constant-Curvature Deflections and Equal Displacements of the Antagonistic Cables

Dynamic Analysis and Vibration Attenuation of Cable-Driven Parallel Manipulators for Large Workspace Applications