Abstract:Modeling and evaluating critical puncture-cutting force and total applied energy are among the most important steps in characterizing the resistance of protective materials to sharp-tipped object insertion. This paper explores the relationship between these two mechanical properties, force and energy, corresponding to the insertion of a pointed blade into soft membranes. The paper’s main contribution includes the addition of friction energy to the existing analytical cutting model in order to develop a more comprehensive model. This energy is provided by the normal stress (contact pressure) caused by the created fracture surface. The contact pressure is applied on both lateral sides of the pointed blade. In this work, a model describing the combined puncture and cutting of protective materials is developed using force distribution analysis and basic concepts of fracture mechanics. Results show that the critical puncture-cutting force (FP/C) required for complete insertion of a pointed blade decreases with the increase of the puncture-cut ratio, ζ, given by the shape of the pointed blade. In other words, the puncture cutting of soft membranes is easier when the pointed blade has a high cutting edge angle than when it has a small cutting edge angle. Fracture mechanics theory is then used to determine the relationship between FP/C and the total puncture-cutting energy, GTotal, that includes fracture toughness of material and friction energy. The presented model is verified by comparing the predicted values of FP/C with experimental data obtained from puncture-cutting tests of soft elastomeric materials and soft-coated fabrics by three pointed blades. According to the proposed model, the methods corresponding to force measurement (FP/C) or energy calculation (GTotal) are both able to evaluate accurately the puncture-cut resistance of protective materials by any sharp-tipped objects.

Process Analysis of Fragment Penetrating Natural Rubber Material

Investigation on the anti-penetration performance of the steel/nylon sandwich plate

Penetration of Disk Fragments Following Impact on Thin Plate

Numerical simulation of the disk fragment impacting resistance of plate target

High-speed Abrasion Experimental Research of an Abradable Seal Rubber

Ballistic testing and theoretical analysis for perforation mechanism of the fan casing and fragmentation of the released blade

Investigation of High-Speed Abrasion Behavior of an Abradable Seal Rubber in Aero-Engine Fan Application

Research on anti-penetration performance of composite armor of steel/composite materials

Experimental Research on Tungsten Alloy Spherical Fragments Penetrating into Carbon Fiber Target Plate

Numerical Simulation on the Anti-Penetration Performance of Polyurea-Core Weldox 460 E Steel Sandwich Plates

Experimental and Numerical Study on a Non-Explosive Reactive Armour with the Rubber Interlayer Applied against Kinetic-Energy Penetrators-The 'Bulging Effect' Analysis

Study on Bulge State of PCrNi3MoV Target Plates Penetrated by Square Fragments

Experimental investigation on anti-penetration performance of polyurea-coated ASTM1045 steel plate subjected to projectile impact

Ballistic performance of spherical fragments penetrating PCrNi3MoV target plates

Simulation of Fragmentation Characteristics of Projectile Jacket Made of Tungsten Alloy after Penetrating Metal Target Plate Using SPH Method

Finite Element Study of Mixed Fracture: Velocity-Dependent Insertion Of Pointed Blades Into Soft Material

Experimental Study on The Effect of Fracture Strain on the Fragmentation Effect of PELE

Fragmentation Behaviour of Radial Layered PELE Impacting Thin Metal Target Plates

Numerical Simulation of PELE Penetrating Composite Armor

Analytical and experimental investigation of puncture-cut resistance of soft membranes

On the Puncture Mechanics of Rubber