Abstract:Hybrid power systems are becoming popular for remote areas due to lower operating cost and green gas emission. Most of these systems are used in remote or harsh environments, so the effect of ambient conditions on system operation is an important factor that should not be ignored. In this paper, the system referred is a domestic hybrid power system including a renewable energy conversion device(Photovoltaic, PV), a traditional energy conversion device(Micro Gas Turbine, MGT) and an electrochemical energy storage unit(batteries). A numerical model, which considers the effect of ambient conditions on the whole system, has been developed. Model Predictive Control (MPC) strategy has been applied to the analysis of power management. The control strategy includes the objective of minimizing system costs, while considering real operational constraints of the plants. Performances attainable with the MPC strategy have been evaluated in comparison with a standard Rule Based Control logic(RBC), by means of costs and efficiency parameters of the system. The effects of ambient conditions on system operation based on MPC-based strategy are evaluated. The simulation has been carried out for the summer and winter periods in four places with different climate in China. Results show that a lower cost of primary fossil energy is found by using the MPC strategy. This is mainly due to the increased use of renewable energy sources by considering the future load. An obvious effect of ambient conditions on control process is observed. A significant improvement for the whole year in efficiency of the system, especially in high latitude cold regions with larger temperature difference from the design condition, is achieved by considering the ambient conditions. The highest reduction of fuel consumption reaches to 4% during the winter. As a result, the effect of the ambient conditions in some areas must be taken into account for control system design.

Impact of PV Characteristics on Voltage Dynamics of PET-based Microgrid

The Impact of PV converter on the grid strength of receiving AC system in MIDCS

Impact of Reactive Power Injection Outside Feed-In Hours on the Reliability of Photovoltaic Inverters

Aalborg Universitet Analysis and Modeling of Interharmonics from Grid-Connected Photovoltaic Systems

Harmonics Suppression for Single-Phase Grid-Connected Pv Systems in Different Operation Modes

Research on Dynamic Voltage Characteristics of AC/DC Hybrid System Based on PET

Interaction Characteristics of Ports of PET in AC/DC Hybrid System under Large Disturbances

Thermal Performance and Reliability Analysis of Single-Phase Pv Inverters with Reactive Power Injection Outside Feed-In Operating Hours

Research of Microgrid Connecting Interface Based on Multi-Port Power Electronic Transformer

<p>A novel PET model based volt/var control of AC-DC hybrid distribution network</p>

Dynamic Modeling and Simulation of Hybrid Energy Storage-Based Photovoltaic Microgrid

Power Management of AC/DC Hybrid Distribution Network With Multi-Port PET Considering Reliability of Power Supply System

Model Predictive Control Based Energy Management of a Household Microgrid

Multi‐port medium‐frequency PET topology for integrating photovoltaic generation with battery storage

Modeling and simulation of grid-connected hybrid photovoltaic/battery distributed generation system

Modeling and Analysis of MW-level Grid-Connected PV Plant

Coordination Control Strategy for PV/Micro-turbine Hybrid Micro-grid

Micro Gas Turbine/Renewable Hybrid Power System for Distributed Generation: Effects of Ambient Conditions on Control Strategy

Modeling a Grid-Connected PV/Battery Microgrid System with MPPT Controller

An Energy Control Strategy for the Microgrid With PV Power Supply

Large‐disturbance Stability Analysis Method Based on Mixed Potential Function for AC/DC Hybrid Distribution Network with PET