Abstract:Abstract Over the past few years, the concept of multi-directional three-dimensional (3D) printing has been introduced to print complex shapes and overhang geometry. This technique requires the nozzle to constantly change orientation to print the object along its tangential direction. A six-degrees-of-freedom (6-DOF) robotic arm or Stewart platform can be a solution, but these mechanisms use more components and motors. An alternative solution has been proposed in this paper based on a four-CRU (cylindrical, revolute, and universal joints) mechanism. This mechanism can orient the nozzle by switching into different motion types with minimal numbers of motors while keeping the mechanism rigid and agile. Therefore, analyses of the reconfiguration, workspace, singularities, and self-motions of a four-CRU mechanism presented in this paper have become necessities. By using primary decomposition, four geometric constraints have been identified, and the reconfiguration analysis has been carried out in each of these. It reveals that each geometric constraint will have three distinct operation modes, namely Schönflies mode, reversed Schönflies mode, and an additional mode. The additional mode can either be a four-DOF mode or a degenerated three-DOF mode, depending on the type of geometric constraints. By taking into account the actuation and constraint singularities, the workspace of each operation mode has been analyzed and geometrically illustrated. It allows us to determine the regions in which the reconfiguration takes place. Furthermore, the inherent self-motion in the Schönflies mode is revealed and illustrated, which occurs at two specified actuated leg lengths. Demonstration of the reconfiguration process and self-motions is provided through a mock-up prototype.

Structure Synthesis and Reconfiguration Analysis of Variable-Degree-of-Freedom Single-Loop Mechanisms with Prismatic Joints Using Dual Quaternions

Synthesis of multi-mode single-loop Bennett-based mechanisms using factorization of motion polynomials

Structural–Parametric Synthesis of Single-Loop 6R and 7R Mechanisms Using Factorization of Motion Polynomials and Its Application in Grippers

Enumeration and optimum design of a class of translational parallel mechanisms with prismatic and parallelogram joints

Kinematic and dynamic analysis of a 3-DOF parallel mechanism

Design and analysis of full-configuration decoupled actuating reconfigurable parallel spherical joint

Structure synthesis of 3-DOF translational parallel mechanisms with configurable platform of translation

Type Synthesis of Two Degrees-Of-Freedom Rotational Parallel Mechanisms with A Fixed Center-Of-Rotation Based on A Graphic Approach

Construction and multi-mode motion analysis of single-degree-of-freedom four-bar multi-mode planar mechanisms based on singular configuration

Geometric Constraint-Based Reconfiguration and Self-Motions of a Four-CRU Parallel Mechanism

A replaceable-component method to construct single-degree-of-freedom multi-mode planar mechanisms with up to eight links

Practical Structural Design Approach of Multiconfiguration Planar Single-Loop Metamorphic Mechanism with a Single Actuator

Design and singularity analysis of a parallel mechanism with origami-inspired reconfigurable 5R closed-loop linkages

Motion Characteristics Analysis of a Novel 2R1T 3-UPU Parallel Mechanism

Synthesis and modelling of one rotational constraint orientated compliant mechanisms

Type synthesis of single-loop 3T1R-parallel mechanisms with a multi-DOF drive system

Algebraic synthesis and input-output analysis of 1-DOF multi-loop linkages with a constant transmission ratio between two adjacent parallel, intersecting or skew axes

Type Synthesis of 2T1R Planar Parallel Mechanisms and Their Moduling Development Applications

Construction and forward kinematics of a novel reconfigurable parallel mechanism

Analysis and Application of a 2-DOF Planar Parallel Mechanism

Direct Kinematics, Inverse Kinematics, and Motion Planning of 1-DoF Rational Linkages