Abstract:The practice of operating municipal solid waste landfills as bioreactor landfills has become more common over the past decade. Because simulating moisture balance and flow is more critical in such landfills than in dry landfills, researchers have developed methods to address this problem using the hydrologic evaluation of landfill performance (HELP) model. This paper discusses three methods of applying the HELP model to simulate the percolation of liquids added to landfill waste: the leachate recirculation feature (LRF), the subsurface inflow (SSI) feature, and additional rainfall to mimic liquids addition. The LRF is simple to use but may not be able to bring the landfill to bioreactor conditions. The SSI feature provides a convenient user interface for modeling liquids addition to each layer. The additional rainfall feature provides flexibility to the model, allowing users to estimate the leachate generation rate and the leachate head on bottom liner associated with daily variation in the liquids addition rate. Additionally, this paper discusses several issues that may affect the HELP model, such as the time of model simulation, layers of liquids addition, and the limitations of the HELP model itself. Based on the simulation results, it is suggested that the HELP model should be run over an extended period of time after the cessation of liquids addition in order to capture the peak leachate generation rate and the head on the liner (HOL). From the perspectives of leachate generation and the HOL, there are few differences between single-layer injection and multiple-layer injection. This paper also discusses the limitations of using the HELP model for designing and permitting bioreactor landfills.

Effect of Coupling Hydro-Mechanical–biodegradation Process on the Slope Stability of a Bioreactor Landfill

Stability and Safety Evaluation of One Solid Waste Landfill Site and Its Treatment Measures

Axisymmetric Gas Flow Model for Bioreactor Landfills Incorporating MSW Compression and Leachate Recirculation

Slope stability associated with expansion of MSW landfill in China

Modeling of Leachate Recirculation Using Vertical Wells in Bioreactor Landfills

Back-Analyses of Landfill Instability Induced by High Water Level: Case Study of Shenzhen Landfill

Preliminary Analysis of the Bio-Mechanical Characteristics for High-kitchen Municipal Solid Waste

[Bioreactor-Landfill Site for Leaching Solution Treatment].

A dual-permeability hydro-biodegradation model for leachate recirculation and settlement in bioreactor landfills

Analytical Solution of Leachate Flow to Vertical Wells in Municipal Solid Waste Landfills Using a Dual-Porosity Model

Characterization of a Joint Recirculation of Concentrated Leachate and Leachate to Landfills with a Microaerobic Bioreactor for Leachate Treatment.

Analysis of Solid-Liquid-gas Interactions in Landfilled Municipal Solid Waste by a Bio-Hydro-mechanical Coupled Model

Modeling of Leachate Recirculation Using Combined Drainage Blanket–horizontal Trench Systems in Bioreactor Landfills

A Bio-Hydro-chemical Model for Gas Pressure Development in Municipal Solid Waste Landfills

A biochemical-thermo-hydro-mechanical coupling of degradable soils

Analysis of Degradation-compression-seepage Interaction in MSW Landfills by a BCHM Coupled Model

Application of Computer Simulation in Multiphysics Interaction Analysis of Landfills

Isothermal Dual-Phase Flow Modeling to Assess the Impact of Gas Collection on Geotechnical and Hydraulic Performance of Landfills

Biochemical, Hydrological and Mechanical Behaviors of High Food Waste Content MSW Landfill: Numerical Simulation Analysis of a Large-Scale Experiment.

Biochemical-thermal-hydro-mechanical Coupling Model for Aerobic Degradation of Landfilled Municipal Solid Waste

Hydrologic Evaluation of Landfill Performance (help) Modeling in Bioreactor Landfill Design and Permitting