Abstract:Constructing a rational electrode structure for supercapacitors is critical to accelerate the electrochemical kinetics process and thus promote the capacitance. Focusing on the flexible supercapacitor electrode, we synthesized a three-dimensional (3D) porous polypyrrole (PPy) film using a modified vapor phase polymerization method with the use of a porous template (CaCO3). The porous design provided the PPy film with an improved surface area and pore volume. The porous PPy film electrode was studied as a binder-free electrode for supercapacitors. It was found that the abundant interpenetrated pores created by the CaCO3 templates within the 3D framework are beneficial to overcoming the diffusion-controlled limit in the overall electrochemical process. It was revealed by electrochemical investigation that a more pseudocapacitive contribution than diffusion-controlled process contribution was observed in the total charge in the redox reaction. The galvanostatic charge/discharge (GCD) measurements showed that the optimized 3D porous PPy film electrode delivered a high capacitance of 313.6 F g–1 and an areal capacitance of 98.0 mF cm–2 at 1.0 A g–1 in a three-electrode configuration, which is nearly three times that of the dense counterpart electrode synthesized in the absence of the CaCO3 template. A specific capacitance of 62.5 F g–1 at 0.5 A g–1 and 31.1 F g–1 at 10 A g–1 was obtained in a symmetric capacitor device. In addition, the porous structure provided the PPy film with the attractive capability of accommodating the volume change during the doping/dedoping process. This is essential for the PPy film to maintain a long cycling life in a practical operation for a supercapacitor. It turned out that a high capacitance retention up to 81.3% after 10,000 GCD cycles was obtained for the symmetric supercapacitor device with the 3D porous PPy electrode (57.1% capacitive retention was observed for the dense PPy electrode). The strategy and the insight analysis are expected to provide valuable guidance for the design and the synthesis of flexible and wearable film electrodes with high performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03553?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03553</a>.SEM images of CaCO3 particles; digital images of the PPy-1.5 and the dense PPy films; XRD patterns of the PPy-1.5 and the dense PPy films; N2 adsorption/desorption isotherm linear plots, BJH (desorption) pore volume and pore size curves of the PPy-1.5 and the dense PPy films; linear fittings of the peak currents as a function of the scan rates in their corresponding CV curves for various electrodes; b slopes obtained from fitted results; electrochemical measurements of the dense PPy electrode; CV curves of the dense PPy symmetric device; rate performance comparison of the PPy-1.5 and the dense PPy film electrodes; equivalent circuit for the EIS fitting; fitted parameters from Nyquist; and SEM images of the PPy-1.5 film and the dense PPy film disassembled from the devices after the cycling test (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03553/suppl_file/am1c03553_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A novel perspective on interfacial interactions between polypyrrole and carbon materials for improving performance of supercapacitors

Structural evolution of carbon foam and its effect on polypyrrole/carbon foam composite electrodes in supercapacitors

Preparation of Graphene/Polypyrrole Composite Film Via Electrodeposition for Supercapacitors

A Free-Standing Polymer Polypyrrole/Cellulose Composite Film via Spatial-Confined Interfacial Electrodeposition for Flexible Supercapacitors

An Approach to Enhance Carbon/polymer Interface Compatibility for Lithium-Ion Supercapacitors.

Hydrogen bond strategy designed textile composite electrodes for supercapacitor with highly efficient utilization of polypyrrole

Polypyrrole film based flexible supercapacitor: mechanistic insight into influence of acid dopants on electrochemical performance

Hydrothermal Synthesis of Polypyrrole/MoS2 Intercalation Composites for Supercapacitor Electrodes

Polyaniline-graphene based composites electrode materials in supercapacitor: Synthesis, Performance and Prospects

Synthesis of polypyrrole/nitrogen-doped porous carbon matrix composite as the electrode material for supercapacitors

Recent advancements of polyaniline-based nanocomposites for supercapacitors

Hollow core-shell polypyrrole@poly(1,5-diaminoanthraquinone) composites with superior electrochemical performance for supercapacitors

Ni-MOF composite polypyrrole applied to supercapacitor energy storage

Structural Tuning of a Flexible and Porous Polypyrrole Film by a Template-Assisted Method for Enhanced Capacitance for Supercapacitor Applications

Enhancing the Mechanical and Electrochemical Properties of Reduced Graphene Oxide Composites Films Through the Combined Actions of Chitosan and Polypyrrole

A Facile Strategy of Polypyrrole Nanospheres Grown on Ti3C2-MXene Nanosheets As Advanced Supercapacitor Electrodes

Enhancement of the Potential Window of Ppy Electrodes in the Presence of a Bis(Oxamato) Nickel(II) Complex for High‐Performance Supercapacitor

Flexible Electrodes Based on Polypyrrole/manganese Dioxide/polypropylene Fibrous Membrane Composite for Supercapacitor

In-situ growing of polypyrrole to cobalt–aluminum layered double hydroxide for high cyclic stability of supercapacitors

Synthesis and characterization of Ni2+-doped polypyrrole electrodes for supercapacitor application

The synthesis of shape-controlled polypyrrole/graphene and the study of its capacitance properties