Abstract:Passive envelope systems for building cooling are of great significance to achieve sustainable and low-energy buildings. Although promising advances in radiative sky cooling and enhanced glazing materials have been achieved recently, there still lacks performance evaluation on integrating these novel materials as passive building envelope systems for the cooling purpose. To this end, the study newly proposes a passive envelope system by synthetically incorporating radiative cooling roofs, colored cooling walls and thermally insulated glazing windows into a standard-compliant commercial building archetype. Comprehensive building thermal, energy, economic and environmental performance across a variety of typical climates in the United States was evaluated. The results were compared to the baseline model, in which the envelope properties are location-dependent and in accordance with ASHRAE Standard 90.1 (β = 0.3, β vis = 0.3, ε = 0.9 for exterior walls, β = 0.23–0.55, ε = 0.75–0.9 for roofs, and U = 1.9–2.8, SHGC = 0.23–0.38, VT = 0.253–0.418 for windows). The highly solar reflective and thermally emissive radiative cooling coating (β = 0.98, ε = 0.97) applied on roofs is able to achieve the cooling electricity savings ranging from 8.2% to 29.7% in response to different climate regions. In comparison, the colored (yellow) cooling paint (β = 0.72, β vis = 0.59, ε = 0.95) applied on walls can achieve annual cooling energy savings regionally from 3.5% to 9.3%. Besides, the thermally insulated windows with the improved visual comfort can save cooling energy from −2.1% to 3.7%. From the maximized cost saving perspective, the optimal design schemes of passive cooling building envelopes for each region were accordingly determined, by which the net cost saving ranges from 0.03 to 2.13 $/(m2·year) in response to climate variability. Notably, the optimal building envelopes regionally correspond to the net avoided CO2 emissions ranging from 0.11 to 16.72 kg/(m2·year)), indicating the noticeable carbon neutral potential induced by the proposed passive envelope system. This research is an effort to provide effective passive cooling envelope systems by combining the existing advanced cooling materials towards sustainable and energy-efficient buildings.

The Passive Cooling Effect of Window Gardens on Buildings: A Case Study in the Subtropical Climate

Experimental Study on the Thermal Performance of Building External Window Greenery in a Subtropical Climate

Study on the Cooling Effect of Window Gardens

Cooling Effect of Direct Green Façades During Hot Summer Days: an Observational Study in Nanjing, China Using TIR and 3DPC Data

Effect of Window Openable Area and Shading on Indoor Thermal Comfort and Energy Efficiency in Residential Buildings with Various Operating Modes

Potential building energy savings by passive strategies combining daytime radiative coolers and thermochromic smart windows

Impact of green roof and green facade on building thermal performance and carbon sequestration in subtropical climate of China

Energy consumption analysis of glass house using electrochromic window in the subtropical region

Study of Surrounding Buildings' Shading Effect on Solar Radiation Through Windows in Different Climates

Outdoor Thermal Performance of Green Roofs Across Multiple Time Scales: A Case Study in Subtropical China

Passive design for green buildings by using green glass space and earth air tunnel

Green Roof Cooling and Carbon Mitigation Benefits in a Subtropical City

Evaluation of Energy Saving Potential of an Urban Green Space and Its Water Bodies

An In-Situ Measurement and Assessment of Evaporative Cooling Effects of Low Impact Development Facilities in a Subtropical City

Study on the influence of key parameters of exterior window structure on building energy saving effect

Shading Effect and Heat Reflection Performance of Green Façade in Hot Humid Climate Area: Measurements of a Residential Project in Guangzhou, China

Strategies for improving the microclimate and thermal comfort of a classical Chinese garden in the hot-summer and cold-winter zone

Evaluation of passive envelope systems with radiative sky cooling and thermally insulated glazing materials for cooling

Energy Consumption Modelling of a Passive Hybrid System for Office Buildings in Different Climates

Cooling effect of the pocket park in the built-up block of a city: a case study in Xi’an, China

Thermal Environment and Energy Performance of a Typical Classroom Building in a Hot-Humid Region: A Case Study in Guangzhou, China