Abstract:Efficient isolation and downstream bioinformation analysis of circulating tumor cells (CTCs) in whole blood contribute to the early diagnosis of cancer and investigation of cancer metastasis. However, the separation and release of CTCs remain a great challenge due to the extreme rarity of CTCs and severe interference from other cells in complex clinical samples. Herein, we developed a low-cost and easy-to-fabricate aptamer-functionalized wafer with a three-dimensional (3D) interconnected porous structure by grafting polydopamine (PDA), poly(ethylene glycol) (PEG), and aptamer in sequence (Ni@PDA-PEG-Apt) for the capture and release of CTCs. The Ni@PDA-PEG-Apt wafer integrated the features of Ni foam with a 3D interconnected porous structure offering enough tunnels for cells to flow through and enhancing aptamer-cell contact frequency, the spacer PEG with flexible and high hydrophilic property increasing anti-interference ability and providing the wafer with more binding sites for aptamer, which result in an enhanced capture specificity and efficiency for CTCs. Because of these advantages, the Ni@PDA-PEG-Apt wafer achieved a high capture efficiency of 78.25%. The captured cancer cells were mildly released by endonuclease with up to 61.85% efficiency and good proliferation. Furthermore, tumor cells were injected into mice and experienced circulation in vivo. In blood samples after circulation, 65% of target tumor cells can be efficiently captured by the wafer, followed by released and recultured cells with high viability. Further downstream metabolomics analysis showed that target cancer cells remained with high biological activity and can be well separated from MCF-10A cells based on metabolic profiles by the PCA analysis, indicating the great potential of our strategy for further research on the progression of cancer metastasis. Notably, not only is the wafer cheap with a cost of only 3.58 U.S. dollars and easily prepared by environmental-friendly reagents but also the process of capturing and releasing tumor cells can be completed within an hour, which is beneficial for large-scale clinical use in the future.

Electrochemical Deposited Calcium Phosphate Nanomaterials with Micro‐Nano Interface for Capture and Non‐Invasive Release of Cancer Cells

Bioinspired three-dimensional hierarchical micro/nano-structured microdevice for enhanced capture and effective release of circulating tumor cells

Degradable Porous Nanoflower Substrate-Embedded Microfluidic Device for Capture, Release and in Situ Manipulation of Cancer Cells

Self-Sterilizing and Regeneratable Microchip for the Precise Capture and Recovery of Viable Circulating Tumor Cells from Patients with Cancer.

Conductive Nanofibers-Enhanced Microfluidic Device for the Efficient Capture and Electrical Stimulation-Triggered Rapid Release of Circulating Tumor Cells

pH-Responsive Carbon Nanotube Film-Based Microfluidic Chip for Efficient Capture and Release of Cancer Cells

Facile Preparation of Three-Dimensional Wafer with Interconnected Porous Structure for High-Performance Capture and Nondestructive Release of Circulating Tumor Cells

Multifunctional Gold Nano-Cytosensor With Quick Capture, Electrochemical Detection, and Non-Invasive Release of Circulating Tumor Cells for Early Cancer Treatment

Cell‐Friendly Isolation and pH‐Sensitive Controllable Release of Circulating Tumor Cells by Fe 3 O 4 @CaCO 3 Nanoplatform

Electrochemical Biosensor for Cancer Cell Detection Based on a Surface 3D Micro-Array

Natural Bio-interface Based on Cancer Cell Membranes for Specific Capture and Release of Circulating Tumor Cells.

Layer-by-layer fabrication of alginate/polyethyleneimine multilayer on magnetic interface with enhanced efficiency in immuno-capturing circulating tumor cells

Capture and biological release of circulating tumor cells in pancreatic cancer based on peptide-functionalized silicon nanowire substrate

Chitosan Nanofibers for Specific Capture and Nondestructive Release of CTCs Assisted by Pcbma Brushes.

ZnO nanowire-integrated bio-microchips for specific capture and non-destructive release of circulating tumor cells

In Vivo Enrichment and Elimination of Circulating Tumor Cells by Using a Black Phosphorus and Antibody Functionalized Intravenous Catheter

Capture And "Self-Release" Of Circulating Tumor Cells Using Metal-Organic Framework Materials

Multifunctional Gelatin-Nanoparticle-Modified Chip for Enhanced Capture and Non-Destructive Release of Circulating Tumor Cells

Capture of Circulating Tumor Cells by Hydrogel-Nanofiber Substrate

A Microfluidic Chip Integrated with Hyaluronic Acid-Functionalized Electrospun Chitosan Nanofibers for Specific Capture and Nondestructive Release of CD44-Overexpressing Circulating Tumor Cells

Fabrication of a Polyvalent Aptamer Network on an Electrode Surface for Capture and Analysis of Circulating Tumor Cells