Abstract:Aiming to pipeline dissipative silencers with independent airflow channels and small cross-section size， Belov derived the calculation formula of noise elimination based on sonic catheter theory. This formula was not suitable for arrayed elements dissipative silencers with interconnected airflow channels and large cross-section size. For this reason， this study proposed a calculation method of noise elimination for arrayed elements silencers. The arrayed elements silencer was divided into periodically arranged silencing units and each silencing unit contained a sound-absorbing column. Each silencing unit was simplified as an expanded muffler and a pipeline dissipative silencer respectively and the theoretical values TL 1 and TL 2 of the resistant part （a sudden change of cross-section at inlet and outlet of airflow channel） and the dissipative part of noise elimination were calculated respectively. On this basis， the simulated value TL s of the noise elimination of each arrayed elements silencer was obtained by the finite element method. The octave band correction function for the noise elimination of dissipative part， N f ， was obtained by fitting the values of (TL s -TL 1 )/TL 2 at all 1/1 octave bands. The modified model for calculating the theoretical value of noise elimination was TL t ’=TL 1 +TL 2 ·N f . As an example， the calculation model of noise elimination for arrayed elements dissipative silencers with different structures and sizes was established when the flow resistance of porous sound absorbing material is 11425 （Pa·s）/m 2 . It was testified by actual measurement results that the absolute error between modified theoretical values and measured values of noise elimination at each octave band was less than 3 dB. When the flow resistance of sound absorbing materials differs significantly from the values given in the example， the calculation models of noise elimination should be determined based on the method proposed in this study.

Effects of the finite circular baffle size on the sound power measurement

Effects of a Finite Size Reflecting Disk in Sound Power Measurements

Computer Simulation Model for Room Diffuse Sound Field

Sound Field Separating on Arbitrary Surfaces Enclosing a Sound Scatterer Based on Combined Integral Equations.

A computer simulation model for room sound field considering diffuse reflection

Effect of Sound Source Scattering on Measurement of Near-Field Head-Related Transfer Functions

Effect of reflecting surfaces on the performance of active noise control

Modeling and Analysis for Sound Field of Rectangular Small Enclosure under the Excitation of Panel Loudspeaker by Using FEM

Performance of a Planar Virtual Sound Barrier at the Baffled Opening of a Rectangular Cavity.

Transmitting Antenna's Reflected Power and Its Influence on Reverberation Chamber Calibration

Analysis of the sound field above finite absorbers in the wave-number domain

Increasing the Performance of Active Noise Control Systems on Ground with a Finite Size Vertical Reflecting Surface

Calculation model of transmission loss for arrayed elements dissipative silencers

Performance Analysis of the Virtual Sound Barrier System with a Diffracting Sphere

Effects of a Near-Field Rigid Sphere Scatterer on the Performance of Linear Microphone Array Beamformers.

Measurement and analysis of the scattering properties of cement surfaces of urban environment in the millimeter waveband

A Non-Paraxial Model for the Audio Sound Behind a Non-Baffled Parametric Array Loudspeaker.

Performance Analysis of the Virtual Sound Barrier System with a Diffracting Head

A coherent model of sound propagation in long enclosures with different acoustics boundaries

Study on Active Control of Sound Radiation From a Baffle in Sonar Equipment

Modeling of Sound Scattering by an Obstacle Located below a Hardbacked Rigid Porous Medium