Abstract:The current type synthesis of the redundant actuated parallel mechanisms is adding active-actuated kinematic branches on the basis of the traditional parallel mechanisms, or using screw theory to perform multiple getting intersection and union to complete type synthesis. The number of redundant parallel mechanisms obtained by these two methods is limited. In this paper, based on Grassmann line geometry and Atlas method, a novel and effective method for type synthesis of redundant actuated parallel mechanisms (PMs) with closed-loop units is proposed. Firstly, the degree of freedom (DOF) and constraint line graph of the moving platform are determined successively, and redundant lines are added in constraint line graph to obtain the redundant constraint line graph and their equivalent line graph, and a branch constraint allocation scheme is formulated based on the allocation criteria. Secondly, a scheme is selected and redundant lines are added in the branch chains DOF graph to construct the redundant actuated branch chains with closed-loop units. Finally, the branch chains that meet the requirements of branch chains configuration criteria and F&C (degree of freedom & constraint) line graph are assembled. In this paper, two types of 2 rotational and 1 translational (2R1T) redundant actuated parallel mechanisms and one type of 2 translational and 1 rotational (2T1R) redundant actuated parallel mechanisms with few branches and closed-loop units were taken as examples, and 238, 92 and 15 new configurations were synthesized. All the mechanisms contain closed-loop units, and the mechanisms and the actuators both have good symmetry. Therefore, all the mechanisms have excellent comprehensive performance, in which the two rotational DOFs of the moving platform of 2R1T redundant actuated parallel mechanism can be independently controlled. The instantaneous analysis shows that all mechanisms are not instantaneous, which proves the feasibility and practicability of the method.

Type Synthesis of 5-DOF Redundantly Actuated Parallel Mechanisms for Super-Large Components

Type synthesis of 5-DOF redundantly actuated parallel robots for super-large components with complicated surfaces.

Type Synthesis and Trajectory Planning of 5-DOF Redundantly Actuated Parallel Robots with Large Output Rotational Angles for Large Workpieces

Type Synthesis of 2T1R Planar Parallel Mechanisms and Their Moduling Development Applications

A 5-DOF redundantly actuated parallel mechanism for large tilting five-face machining

A New Method for Type Synthesis of 2R1T and 2T1R 3-DOF Redundant Actuated Parallel Mechanisms with Closed Loop Units

A 2R1T Redundantly Actuated Parallel Manipulator with an Offset Moving Platform and Fixed Linear Actuators

Kinematic Analysis and Optimization of a New 2R1T Redundantly Actuated Parallel Manipulator with Two Moving Platforms

Type synthesis approach for the 2R1T compliant parallel mechanism with a suitable constrained branch

Design and analysis of a novel 3T1R four-degree-of-freedom parallel mechanism with infinite rotation capability

Type synthesis and three-dimension modeling of a new 3P-1R parallel platform mechanism

Configuration design of movable heavy-duty reconfigurable posture adjustment platform with dual motion modes

Type synthesis and kinematics analysis of a family of three translational and one rotational pick-and-place parallel mechanisms with high rotational capability:

Optimal Design of a Novel 4-Degree-of-freedom Parallel Mechanism with Flexible Orientation Capability

Type synthesis of single-loop 3T1R-parallel mechanisms with a multi-DOF drive system

Type synthesis of a new parallel mechanism with complete separation of constraints and drives

Type Synthesis of a Family of 3-DOF Spherical Parallel Mechanisms Using Upper-Lower Combination and Axis Movement Theorem

Type synthesis of parallel mechanism with 3T/3R motion patterns

Optimal design of a linkage-cam mechanism-based redundantly actuated parallel manipulator

Type Synthesis of Two-Degrees-Of-Freedom 3-4R Parallel Mechanisms with Both Spherical Translation Mode and Sphere-On-Sphere Rolling Mode

Type Synthesis of 3T2R Decoupled Hybrid Mechanisms with Large Bearing Capacity