Abstract:The synthesis of optoelectrically enhanced nanomaterials should be continuously improved by employing time- and energy-saving techniques. The porous zinc oxide (ZnO) and copper-doped ZnO nanocomposites (NCs) were synthesized by the time- and energy-efficient solution combustion synthesis (SCS) approach. In this SCS approach, once the precursor-surfactant complex ignition point is reached, the reaction starts and ends within a short time without the need for any external energy. The TGA-DTA analysis confirmed that 500 °C was the point at which stable metal oxide was obtained. The doping and heterojunction strategy improved the optoelectric properties of the NCs more than the individual constituents, which then enhanced the materials' charge transfer and optical absorption capabilities. The porosity, nanoscale crystallite size (15-50 nm), and formation of Cu/CuO-ZnO NCs materials were confirmed from the XRD, SEM, and TEM/HRTEM analyses. The obtained d-spacing values of 0.275 and 0.234 nm confirm the formation of ZnO and CuO crystals, respectively. The decrease in photoluminescence intensity for the doped NCs corroborates a reduction in electron-hole recombination. On the Mott-Schottky analysis, the positive slope for ZnO confirms the n-type character, while the negative and positive slopes of the NCs confirm the p- and n-type characters, respectively. A diffusion-controlled type of charge transfer process on the electrode surface was confirmed from the cyclic voltammetric analysis. Thus, the overall analysis shows the applicability of the less expensive and more efficient SCS for several applications, such as catalysis and sensors. To confirm this, an organic catalytic reduction reaction of 4-nitrophenol to 4-aminophenol was tested. Within three and a half minutes, the catalytic reduction result showed the great potential of NCs over ZnO NPs. Thus, the energy- and time-saving SCS approach has a great future outlook as an industrial pollutant catalytic reduction application.

Synthesis of ZnWO4/Cu2O Composites and Efficient Catalytic Properties for 4-nitrophenol Removal

Iron-doped copper-cobalt sulfide nano-box derived from ZIF-67 as a high-efficiency heterogeneous catalyst for hydrogenation of 4-nitrophenol

One-step fabrication of Fe3O4–Cu nanocomposites: High-efficiency and low-cost catalysts for reduction of 4-nitrophenol

Synthesis of copper-silver-zinc oxide nanocomposites for 4-nitrophenol reduction: doping and heterojunction

Composite material derived from ZIF-67 and biochar promotes ozonation of 4-nitrophenol

High-efficient Catalytic Reduction of 4-Nitrophenol Based on Reusable Ag Nanoparticles/graphene-Loading Loofah Sponge Hybrid.

Atomically dispersed ternary FeCoNb active sites anchored on N-doped honeycomb-like mesoporous carbon for highly catalytic degradation of 4-nitrophenol

High-performance Cu Nanoparticles/three-Dimensional Graphene/ni Foam Hybrid for Catalytic and Sensing Applications.

Cu/CuO-Doped ZnO Nanocomposites via Solution Combustion Synthesis for Catalytic 4-Nitrophenol Reduction

Tetragonal multilayered ZnO/CuO composites derived from Zn- and Cu-containing metal-organic framework: Effect of calcination temperature on physicochemical properties and photocatalytic activity

Synthesis and Characterization of Chitosan-Copper Nanocomposites and Their Catalytic Properties for 4-Nitrophenol Reduction.

N-doped graphene-based CuO/WO3/Cu composite material with performances of catalytic decomposition 4-nitrophenol and photocatalytic degradation of organic dyes

CoFe Nanoparticle-Decorated Reduced Graphene Oxide for the Highly Efficient Reduction of 4-Nitrophenol

Zn-CNTs-Cu catalytic in-situ generation of H2O2 for efficient catalytic wet peroxide oxidation of high-concentration 4-chlorophenol

Cu2S/Ni3S2 Nanosheets Combined with Nickel Foam Substrate for Efficient Catalytic Ozonation of P-Nitrophenol in Wastewater

Preparation of novel ZnO-NP@Zn-MOF-74 composites for simultaneous removal of copper and tetracycline from aqueous solution

Synthesis of lignin sphere-based carbon-coated nZVI nanocomposites for efficient activation of persulfate to degrade 2,4-dichlorophenol

Fabrication of a 2D/2D G-C3n4@zntda Nanosheets Catalyst for Highly Efficient Degradation of 2,4-Dibromophenol and Improved Flame Retardancy of Polyurethane Foam

Novel N-ZnO/p-BN adsorption-photocatalytic composites with interfacial bonding for efficient synergistic degradation of pollutants in water

Synthesis of amorphous CoSn(OH)6 nanocubes for photocatalytic reduction of 4-nitrophenol

Enhanced Heterogeneous Catalytic Ozonation to Degrade P-Nitrophenol by Co-doped Ni3S2/NF Nanosheets