Abstract:With the increase of coal mining in China, a large amount of waste coal gangue is produced. How to reuse waste coal gangue is an important research direction. The research results showed that the improvement of base asphalt mortar by coal gangue powder could improve the performance of matrix asphalt, however, search of rubber asphalt mortar modified by coal gangue powder is rarely reported. High and low-temperature performance is the critical performance of asphalt mortar. So the limestone powder modified base asphalt mortar (LPMBAM), limestone powder modified rubber asphalt mortar (LPMRAM), and coal gangue powder modified rubber asphalt mortar (CGPMRAM) are prepared, the high and low-temperature performance of asphalt mortar are analyzed by cone penetration tests and bending beam rheological tests (BBR). The results show that the cone penetration of asphalt mortar decreases with the increase of the filler-asphalt ratio and the decrease of the temperature. The shear strength and the stiffness modulus increase with the rise in the filler-asphalt ratio and the decrease in temperature. At the same filler-asphalt ratio and temperature, the order of cone penetration is CGPMRAM < LPMRAM LPMRAM > LPMBAM, so the high-temperature performance of CGPMRAM is better than that of LPMRAM, much better than LPMBAM, the order of stiffness modulus is LPMRAM < CGPMRAM < LPMBAM so the low-temperature performance of LPMRAM and CGPMRAM is better than that of LPMBAM. By the double linear model, the optimum filler-asphalt ratio is determined to be 0.44~0.46 for LPMRAM and 0.42~0.43 for CGPMRAM. Microscopic tests show that the surface of coal gangue powder is rougher than that of limestone powder. The content of active oxides such as SiO2 and Al2O3 in coal gangue is about 7.8 times that of limestone powder. These physical and chemical properties make coal gangue powder able to adsorb rubber asphalt better and improve the high-temperature performance of CGPMRAM while slightly worsening the low-temperature performance of CGPMRAM but still better than LPMBAM.

Laboratory Evaluation on the Road Performance of Diatomite Modified Porous Asphalt Mixture

Laboratory Evaluation On The Performance Of Porous Asphalt Mixture With Steel Slag For Seasonal Frozen Regions

Mechanical Performance Of Warm-Mixed Porous Asphalt Mixture With Steel Slag And Crumb-Rubber-Sbs Modified Bitumen For Seasonal Frozen Regions

A New Eco-Friendly Porous Asphalt Mixture Modified By Crumb Rubber And Basalt Fiber

Preparation and Thermal Performance Testing of Diatomite-Modified Asphalt Pavements

Experimental Study on Pavement Performances of SBP Modified Asphalt

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Investigation on physical properties and modification mechanisms of diatomite/SBR modified asphalt

Evaluation of the Properties of Asphalt Mixes Modified with Diatomite and Lignin Fiber: A Review

Porous Asphalt Mix Design Pavement by Incorporating a Precise Proportion of Recycled Coarse Aggregate

Preparation and Road Performance Study of Rubber–Diatomite Composite-Modified Asphalt Mixture

State-of-the-art of porous asphalt pavement: Experience and considerations of mixture design

Feasibility Evaluation of Preparing Asphalt Mixture with Low-Grade Aggregate, Rubber Asphalt and Desulphurization Gypsum Residues

Laboratory performance evaluation of porous asphalt mixture containing recycled concrete aggregate and fly ash

Investigation on the effect of fine solid wastes on the runoff purification performance of porous asphalt mixture

Leachate risks of fine solid wastes in porous asphalt pavement and runoff purification effects of diatomite filler

Effect of Coarse Aggregate Surface Texture on Performance of Porous Asphalt Mixture (PAM)

Study on High and Low Temperature Performance of Mineral Powder Modified Rubber Asphalt Mortar

Influences of polymer modifiers on Porous Hot Asphalt Mixture Property and Durability

Durability Evaluation of Single-Component Polyurethane-Bonded Porous Mixtures

Laboratory Evaluation of Asphalt Mixture Performance Using Composite Admixtures of Lignin and Glass Fibers