Abstract:<p>As one of the prefabricated structures, precast segmented bridges can be used to shorten construction time, reduce traffic delays, improve quality control, and minimize environmental impact. Despite the numerous advantages of segmented pre-fabricated rapid assembly technology, it is not widely used in high seismic hazard zones nor applied to complex water-abundant situations because of the lack of knowledge on its seismic performance. Through experimental and numerical studies, researchers have studied the seismic performance of such type of column under quasi-static testing. The behaviors of the column or bridge under desired strong ground motions (GMs) have been rarely investigated. This paper presents the major findings of an underwater shaking table testing program conducted on a 1/4 scaled single-span bridge with novel self-centering segmented concrete-filled steel tube columns. This study focuses on the performance of the bridge subjected to different GMs under 4 water conditions, which are with water at a height of 1.2 m, 1.5 m, 1.8 m, and without water. The bridge model incorporated two post-tensioned precast self-centering segmented concrete-filled steel tube (PSCFST) single columns with fixed and sliding supports connected to a single span steel box-girder superstructure. The internal unbonded PT tendons are installed at the center of the segment section, and external energy dissipation (ED) bars are installed on the outside of the bottom segment. The bridge model was then subjected to a sequence of natural and artificial GMs with different amplitudes. The well-designed PSCFST bridge demonstrated a desirable seismic performance, and no significant damage was observed. Concerning the overall response of the structure, the maximum drift ratio reached 2.14%. Moreover, a maximum residual drift of 0.09% was observed after the tests, which indicates that the test model demonstrated a desirable self-centering capability after a sequence of GMs. The cumulative energy dissipation and equivalent viscous damping ratio of the bridge were calculated. A comparison is made for the seismic performance of the bridge especially in terms of the displacement and acceleration of the whole structure under the cases of with and without water.</p>

Seismic Performance Analysis of Precast Segmental Bridge Columns with Self-Centering Energy Dissipation Device

Analytical Calculation Method of Seismic Resistant Response for Posttensioned Precast Bridge Piers

Stimulation of Phosphoinositide Hydrolysis by gamma- and delta-Hexachlorocyclohexane in Primary Cultures of Cerebellar Granule Cells: Interaction with Glutamate and Carbachol Receptor-Mediated Phosphoinositide Response and Effects of Specific Pharmacological Agents

Seismic Behavior of Pc Column and Steel Beam Composite Moment Frame with Posttensioned Connection

A new method of producing duodenal and gastric ulcers in dogs.

Innovative Methods to Improve the Seismic Performance of Precast Segmental and Hybrid Bridge Columns under Cyclic Loading

Cyclic Testing on Seismic Behavior of Segmental Assembled CFST Bridge Pier with External Replaceable Energy Dissipator

Numerical Investigation of the Performance of Segmental CFST Piers with External Energy Dissipators under Lateral Cyclic Loadings

Design and seismic performance of precast segmental bridge columns repaired with UHPC jacket after earthquake-induced damage

Experimental study on the seismic performance of self-centering bridge piers incorporating ECC and superelastic SMA bars in the plastic hinge regions

Seismic performance of bridge with unbonded posttensioned self-centering segmented concrete-filled steel-tube columns: An underwater shaking table test

Cyclic loading test of self-centering precast segmental concrete high-speed railway bridge columns with UHPC-filled duct connections

Seismic resilience of RC bridge with self-centering energy dissipation braces using SMA U-shaped plates

Seismic behaviors of precast assembled bridge columns connected with prestressed threaded steel bar: Experimental test and hysteretic model

Behavior of a Precast Bridge Pier with Basalt Fiber-Reinforced Polymer (BFRP)-Strengthened Segments under Seismic Loading

Seismic performance of a new type of prefabricated bridge pier with cast-in-place UHPC jacketing

The Influence of Socket Depth on the Seismic Behavior of Precast Hollow Bridge Pier

Seismic performance of RC bridges with double-column medium height bents retrofitted with SCEBs under near-field ground motions

Experimental investigation and seismic response behavior of a self-centering precast concrete frame with hysteretic dampers

Experimental and Numerical Investigations on the Mechanical Properties of Precast Segmental Barriers with UHPC Connections

Quasi-static tests and seismic fragility analysis of RC bridge piers with high-strength steel bars and high-strength/ultra-high performance concrete