Abstract:As an effective method for efficient precision machining of hard and brittle materials, ultrasonic-assisted machining has been widely researched and applied over the past years. As a result, higher requirements are put forward for the performance of ultrasonic-assisted machining equipment. The ultrasonic transducer is one of the core components of an ultrasonic-assisted machining system, which determines its machining performance. The study on the design method of an ultrasonic transducer is necessary for the establishment of an ultrasonic-assisted machining system. The four-terminal network method based on mechanic-electric analogies is an effective design method, which regards the mechanical vibration system as an electrical four-terminal network. The wave velocity of the mechanical wave in the vibration system can be equivalent to the current in the equivalent circuit, and the force impedance at both ends of the vibration system can be equivalent to the electrical impedance at both ends of the equivalent circuit. The size of the ultrasonic transducer can be calculated according to the electromechanical similarity theory and vibration boundary conditions. However, the conventional four-terminal network design method of the piezoelectric ultrasonic transducer (PUT) neglects the electromechanical coupling process inside the stacked piezoelectric ceramics (SPCs). The PUT designed by this method has a big size error and low output amplitude. Aimed to obtain a higher ultrasonic amplitude of PUT, the equivalent six-terminal network of SPCs considering electromechanical coupling is introduced into the traditional design method, and two PUTs of different sizes are designed by the four-terminal network and the six-terminal network, named transducer A and transducer B, respectively. The natural frequency and output amplitudes of the two PUTs are analyzed and compared by the finite element method, and the experiments further verified the validity of the theory and the simulation analysis. When the excitation voltage is the same, results show that the output amplitude of transducer B (designed by the six-terminal network) is 1.5 times higher than that of transducer A. Finally, applying a six-terminal network to the PUT designing can improve the vibration performance of the PUT effectively.

Intelligent optimization design of 2-2 piezo-composites for ultrasonic transducer

Matching layer design of a 2–2 piezo-composite ultrasonic transducer for biomedical imaging

An Optimization Design Strategy of 1–3 Piezocomposite Ultrasonic Transducer for Imaging Applications

Intelligent Optimization Design of a Phononic Crystal Air-Coupled Ultrasound Transducer

Feasible Optimization and Fabrication of Multi-dimension Composites for High Frequency Ultrasonic Transducer

Feasible Optimization and Fabrication of Multidimension Composites for High-Frequency Ultrasonic Transducer

Design and fabrication of non-periodic 1–3 composite structure for ultrasonic transducer application

Intelligent Optimization of Matching Layers for Piezoelectric Ultrasonic Transducer

An Efficient Optimization Design for 1 MHz Ultrasonic Transmitting Transducer

Optimization Design of Ultrasonic Transducer with Multimatching Layer

Design of Piezoelectric Ultrasonic Transducer Based on Doped PDMS

Optimization Design of High Frequency Piezoelectric Ultrasonic Transducer for IC Packaging

Particle Swarm Optimization Algorithm-Based Design Method for Ultrasonic Transducers

Finite Element Study of 2-2 Piezocomposite Transducer with Random Polymer Properties

Optimization design of high-frequency ultrasonic transducer based on ANFIS and particle swarm optimization algorithm

Novel multi-layer-composites design for ultrasonic transducer applications

Optimized Design for a Piezoelectric Ultrasonic Transducer Based on the Six-Terminal Network

Recent Development and Perspectives of Optimization Design Methods for Piezoelectric Ultrasonic Transducers

Structural Optimization Design of MEMS Piezoelectric Hydrophones Based on Intelligent Learning Algorithm

Design and Fabrication of 1-3 Piezoelectric Composite Material Air Coupled Ultrasonic Transducer

Structural Optimization Study on a Three-Degree-of-Freedom Piezoelectric Ultrasonic Transducer