Abstract:With increasing demand of green and inexpensive power source with long cycle life and high power density, supercapacitors based on biomass-based active carbons have attracted wide attention in recent years. However, the electrochemical performances of the biomass-based active carbons are still not competitive and the control of their mi-crostructure still remains a challenge. Therefore, waste biomass furfural residue is employed as raw material to prepare porous carbon for supercapacitors. The waste biomass-based porous carbon with obviously improved electrochemical performance was prepared by two-step carbonization process under the protection of argon by using KOH as activated agent. The morphology, structure and composition of final porous carbon materials were characterized by SEM, TEM, Raman, XPS, XRD, etc. The effect of different KOH/precursor weight ratio on the textural properties and sur-face chemistry of KOH-activated carbons was examined. The results showed that the natural hierarchical structure of furfural residue can be preserved and the furfural residue based porous carbon materials ( FRC ) have 3D interconnected porous structure, and the sample synthesized at 3∶1 ratio of KOH and furfural residue, under 750 ℃has the highest BET surface area of 2 164.3 m2/g. When applied as the electrode material of supercapacitor device, the FRC exhibits outstanding capacitive performance with specific capacitance of 298 F/g at 0.5 A/g, good rate ca-pacitive behavior, and excellent cycling stability (97% of capacitance retention after 10 000 cycles) in 6 mol/L KOH electrolyte. The specific energy density of the device is about 8.18 W/(h·kg) at a current density of 0.5 A/g. And the specific energy density is still 4.58 W/(h·kg) with a high power density of 3 750 W/kg, which is superior to that of the commercial devices based on two symmetric activated carbon electrodes. These porous carbons derived from low-cost waste biomass are expected to be ideal electrode material for supercapacitors. The present approach represents a sustainable platform towards the rational design of carbon materials and the efficient utilization of biomass resources.

The Preparations of Nanoporous Carbon with Multi-Heteroatoms Co-Doping from Black Liquor Powders for Supercapacitors

Hydrangea-like N/O codoped porous carbons for high-energy supercapacitors

Preparation of biomass-based N, P, and S co-doped porous carbon with high mesoporosity based on the synergistic effect of NaOH/thiourea and melamine phosphate and its application in high performance supercapacitors

Preparation of Boron/Sulfur-Codoped Porous Carbon Derived from Biological Wastes and Its Application in a Supercapacitor

Novel Synthesis Route for the Preparation of Mesoporous Nitrogen-Doped Carbons from Forestry Wastes for Supercapacitors

One-Step Synergistic Effect to Produce Two-Dimensional N-Doped Porous Carbon Nanosheets with Ultrahigh Porosity from Biomass for High-Performance Supercapacitors

Highly Porous Carbon with Graphene Nanoplatelet Microstructure Derived from Biomass Waste for High‐Performance Supercapacitors in Universal Electrolyte

Supercapacitors based on carbons with tuned porosity derived from paper pulp mill sludge biowaste

Chitosan-derived large surface area porous carbon via microphase separation engineering of pore-regulation and nitrogen-doping coupling for high-performance supercapacitors

Facile Preparation of S, O-codoped Carbon Materials from Wasted Pulping Liquid for Supercapacitors

Hierarchically Porous Nitrogen-Doped Carbon Derived from the Activation of Agriculture Waste by Potassium Hydroxide and Urea for High-Performance Supercapacitors

Green Activation Method and Natural N/O/S Co-Doped Strategy to Prepare Biomass-Derived Graded Porous Carbon for Supercapacitors

Cellulose-Solvent-Assisted, One-Step Pyrolysis to Fabricate Heteroatoms-Doped Porous Carbons for Electrode Materials of Supercapacitors

Synergistic Supercritical Water ‘wet’ Activated Biomass Carbon As High Performances Electrode Materials for Supercapacitor

Preparation of hierarchical micro-meso porous carbon and carbon nanofiber from polyacrylonitrile/polysulfone polymer via one-step carbonization for supercapacitor electrodes

Biomass derived N/O self-doped porous carbon for advanced supercapacitor electrodes

Fabrication of Biomass-Derived Activated Carbon with Interconnected Hierarchical Architecture Via H3PO4-assisted KOH Activation for High-Performance Symmetrical Supercapacitors

Sustainable and Scalable Synthesis of 2D Ultrathin Hierarchical Porous Carbon Nanosheets for High‐Performance Supercapacitor

Preparation of porous carbons from furfural residue and its application to high-performance supercapacitors

Preparation of oxygen-rich hierarchical porous carbon for supercapacitors through the co-carbonization of pitch and biomass

Fabrication of self-doped aramid-based porous carbon fibers for the high-performance supercapacitors