Abstract:This paper introduces a real field mission profile oriented design tool for the new generation of grid connected PV-inverters applications based on SiC-devices. The proposed design tool consists of a grid connected PV-inverter model, an ElectroThermal model, a converter safe operating area (SOA) model, a mission profile model and an the evaluation block. The PV-system model involves a three level bipolar switch neutral point clamped (3L-BS NPC) inverter connected to the three phase grid through a LCL-filter. Moreover, the SOA model calculates the required converter heatsink thermal impedance Z th_H in order to perform in a safe mode for the whole operating range. Furthermore, the proposed design tool considers the mission profile (the measured solar irradiance and ambient temperature) from the real field where the converter will operate. Thus, a realistic loading of the converter devices is achieved. To consider one year real field measurements of the mission profile, an accurate long term simulation model is developed. The model predicts the junction and case temperature of the converter devices, for three different case scenarios. In the first case, a one year mission profile is used into the model with a sampling rate of five minutes. For the second and third case, a more detailed analysis is performed for one week mission profile (in the wintersummer time) with a sampling rate of 25 s. The simulation results shows the thermal loading distribution among the converter devices (MOSFET, IGBT+FD) in terms of junction (average, peak, ΔT) and case (average) temperature for all three simulation cases. Finally, the evaluation block is used to analyze the results in order to perform a thermal loading-based classification of the converter devices.

Real-time Implementation of a Dual-Active-Bridge Based Multi-Level Photovoltaic Converter

Design of Interactive Digital Photovoltaic Array Simulator

Real-Time Thermal Evaluation of Power Converters in Microgrids by Device Current Reconstruction

Real Field Mission Profile Oriented Design of a SiC-based PV-inverter Application

Dc-Link Ripple Suppression of Cascaded H-Bridge Based MV Grid Emulator Apparatus for Analysis and Testing of Grid-Tied Converters in Distribution System

Three-Phase Seven-level H-bridge Commutated Active Clamped Converter

Real-Time Implementation of Three-Phase Z Packed U-Cell Modular Multilevel Grid-Connected Converter Using CPU and FPGA

Redundant Module Based Control Scheme for Grid-Forming Cascaded H-Bridge PV Converters to Enhance Overcurrent Capability

Efficient Prototyping of a Field-Programmable Gate Array-Based Real-Time Model of a Modular Multilevel Converter

Performance Evaluation of a Three- Phase Five-Level Quasi-Z-Source Cascaded H-Bridge for Grid-Connected Applications

Modeling and Analysis of 2/3-Level Dual-Active-Bridge DC-DC Converters with the Five-Level Control Scheme

A Modular Multilevel Converter with Boosting, Self-Balancing, and Scaling Capabilities for High- Voltage Transformerless PV Applications

An Experimental System of Power Grid Including Photovoltaic System Based on TMS320F28027

Modeling Method for the Real-Time Simulation of Bridge-Based High-Switching-Frequency Power Electronic Converters

Parallel multi‐rate simulation scheme for modular multilevel converter‐based high‐voltage direct current with accurate simulation of high‐frequency characteristics and field programmable gate array‐based implementation

A high performance simulation methodology for multilevel grid-connected inverters

Parallel kernel solver of an FPGA‐based real‐time simulator for active distribution networks

Real-Time Digital Simulation for a 50Mvar Cascaded Multilevel STATCOM

Real-Time Simulation of Power Electronic Systems Based on Predictive Behavior

Low Cost and Optimized FPGA-HIL Real Time Simulation of a Boost Converter Powered by a Photovoltaic Panel

Suppression of Chattering in the Real-Time Simulation of the Power Converter