Abstract:Magnetically levitated stages(MLS) have potentials to obtain good motion performances in high vacuum environment. Yet the electromagnetic forces/torques corresponding to six degrees of freedom(DOF) motions have coupling relationship with each current of coil array, and this coupling is still associated with the relative positions between the mover and the stator of the stage. So it is quite difficult to control the 6-DOF motions of the stage. By reasonable commutation of coil array, this complicated coupling relationship can be decoupled. The analytical force/torque-decomposing model of the stage is established first. Then the initial currents of coil array are commutated based on the pseudo inverse of the analytical force/torque-decomposing model matrix. And then the coil array currents are commutated again with different current bounds given to the initial currents as well as in the sense of minimum 2-norm of currents vector. Using the long stroke magnetically levitated stage with moving coils under investigation as examples, the currents of coil array are commutated with different current bounds adopting the proposed commutation method, the determination of current bound and the current bounds’ influences on the heat-losses in coil array are analyzed, and the effectiveness of implementation algorithm of proposed commutation method is discussed. Simulation, analysis and discussion results indicate that the currents of coil array within the given current bound can be solved analytically by proposed commutation method, and the implementation algorithm does not need any searching or iteration. By the current-bounded commutation method proposed, the amplitude of coil array currents can be limited within an appropriate current bound(This is very beneficial to the improvement of the reliability and motion performance of the stage), as well as these currents can also generate the desired forces and torques.

Edge Coil Force Fitting and Current Optimal Commutation Algorithm for Magnetic Levitation Planar Motor with Moving Magnet

Advanced Computational-Time Reduction Technology of Nonlinear Fourier-Based and Magnetic Circuit Hybrid Model

Reducing the Maximum Temperature Rise of Coil Array Based on Current Proportion Commutation Algorithm for Magnetic Levitation Planar Motor

Torque ripple error compensation of high‐dynamic coil array commutation algorithm for magnetic levitation planar motor

Current-bounded Commutation of a Long-Stroke Magnetically Levitated Stage with Moving Coils

A Real-Time Computation Model of the Electromagnetic Force and Torque for a Maglev Planar Motor with the Concentric Winding

Decoupling control algorithm of magnetic suspension system based on current optimization

Current Compensation Control of Multiple Frequency Vibrations of the Rotor in Active Magnetic Bearing High Speed Motors

Rotor Position Estimation Strategy for Self-Sensing Active Magnetic Bearing Considering Eddy Currents

Augmentation of Propulsion Based on Coil Array Commutation for Magnetically Levitated Stage

Novel Decoupling Control and Eigenstructure Assignment Strategies for Rigid Active Magnetic Bearing Rotor System

Modeling and Design of a 3-DOF Magnetic Bearing with Toroidal Radial Control Coils

On Improved Commutation for Moving-Magnet Planar Actuators

Coil Array Real-time Commutation Law for Magnetically Levitated Stage with Moving-coils

An accurate real-time model of maglev planar motor based on compound Simpson numerical integration

Building and verifying the force/torque-decomposing model of a magnetically levitated stage with moving-coils

Electromagnetic Analysis for Axial-Flux Induction Planar Motor Based on Reduced Order Coefficient Matrix

Integrated Optimization of 3D Structural Topology and 2D Halbach Parameters for Maglev Planar Motor

Improved ADRC for a Maglev Planar Motor with a Concentric Winding Structure

Modeling and Analysis of A Novel Magnetic Levitation Gravity Compensator

Theoretical and Experimental Research on Hybridmagnetic-Circuit Multi-Couple Motor