Abstract:Coal elasticity and gas expansion are important factors for coal and gas outburst. During the outburst process, the elastic strain energy of coal is mainly released from the stress region, and the gas expansion energy near the working face is larger, and it is not a continuous release process. To reveal the mechanical characteristics and energy evolution of outburst coal seam, uniaxial and triaxial compression tests were carried out on outburst coal seam samples under different loading methods. Coal elasticity and gas expansion are important factors for coal and gas outburst. During the outburst process, the elastic strain energy of coal is mainly released from the stress region, and the gas expansion energy near the working face is larger, and it is not a continuous release process. To reveal the mechanical characteristics and energy evolution of outburst coal seam, uniaxial and triaxial compression tests were carried out on outburst coal seam samples under different loading methods. The experimental results show that the elastic characteristics become more obvious with the increase of loading rate, the peak strain increases, the elastic modulus is linearly related with the loading rate,and the overall degree of fragmentation increases with the increase of loading rate, which is consistent with the severity of macroscopic coal failure. The failure mode of coal under uniaxial compression conditions is often manifest as brittle failure. The strength characteristics of coal under different loading rates comply with the Mohr‐Coulomb criterion, and the peak strength is linearly related to the failure time and loading rate. With the increasing confining pressure causes the failure of coal samples to transition from ductile to brittle, and the failure mode develops from local shear to overall splitting. The elastic energy evolution curve is consistent with its stress‐strain curve. With the increase of confining pressure, the limiting elastic energy and peak total energy increase in a quasi‐linear manner. The accumulated limit elastic energy plays an important role in the failure of coal samples, and the macroscopic manifestation thereof is that the coal samples fail more severely under high confining pressure conditions than under low confining pressure conditions. The research results are of great significance for the comprehensive prevention and control of coal and gas outburst.

Mechanical Properties and Failure Characteristics of Gas-Bearing Coal under Static Pre-Load and Impact Load

Dynamics behaviour of gas-bearing coal subjected to SHPB tests

Experimental investigation of mechanical properties, impact tendency, and brittleness characteristics of coal mass under different gas adsorption pressures

Effect of loading rate on the mechanical and seepage characteristics of gas-bearing coal–rock and its mechanical constitutive model

Dynamic mechanical response and crack evolution law of raw coal loaded by dynamic-static coupling under three-dimensional constraints

Research on the dynamic tensile characteristics and surface crack evolution of coal under impact loading

Experimental Investigation on Mechanical and Acoustic Emission Characteristics of Gassy Coal under Different Stress Paths

Macro–Micro Damage and Failure Behavior of Creep Gas-Bearing Coal Subjected to Drop Hammer Impact

Numerical study on damage response and failure mechanism of gas-containing coal-rock combination under confining pressure effect

Experimental investigation on the nonlinear characteristics of energy evolution and failure characteristics of coal under different gas pressures

Mechanical properties and energy evolution of outburst coal seams under different load regimes

Experimental Study on the Dynamic Tensile Characteristics of Coal Samples

Failure characteristics and meso-deterioration mechanism of pre-stressed coal subjected to different dynamic loads

Experimental Study on the Mechanical Behavior of Coal under Triaxial Dynamic Compression

Experimental study on dynamic mechanical properties of multidirectional constrained water-bearing coal samples under dynamic-static coupling loading

Dynamic tensile properties, deformation, and failure testing of impact-loaded coal samples with various water content

Mechanical behaviors and failure characteristics of coal-rock combination under quasi-static and dynamic disturbance loading: a case based on a new equipment

Experimental Study on the Influence of Lithology and Rock-Coal Height Ratio on Mechanical Properties and Impact Effect of Combined Body

Study on the Cyclic Impact Mechanical Characteristics of Coal under Confining Pressure

Experimental and numerical study on failure characteristics and mechanism of coal under different quasi-static loading rates

Triaxial creep damage–catastrophe instability characteristics and a nonlinear constitutive model of gas-bearing coal