Abstract:Dehydrogenation of cycloalkanes derived from plastic waste presents an attractive approach for hydrogen production and plastic waste valorization. In this study, we developed Pt/Al2O3 nanosheet catalysts with tailored support properties by adjusting the calcination temperature. Comprehensive characterization of the catalysts revealed that the support properties, including crystal phase, surface area, acid sites, hydroxyl groups, and defect sites, were modulated by increasing the heat treatment temperature. Consequently, these variations led to differences in Pt particle size, dispersion, and chemical environment of active sites on the resulting Pt/Al2O3 catalysts. The catalytic dehydrogenation of methylcyclohexane exhibited a volcano-like trend in terms of catalytic activities, while the stability of the catalyst showed a concave relationship with increasing calcination temperature. The Pt/Al2O3-700 nanosheet catalyst, prepared using a support calcined at 700 °C, exhibited exceptional catalytic activity and stability. It achieved a remarkable hydrogen production rate of 3402 mmol gPt-1 min-1 at 350 °C, surpassing most Pt-based catalysts reported in the literature. In addition, this catalyst is also effective for the dehydrogenation of plastic waste derived 1,4-dimethylcyclohexane and 1,3-dimethylcyclohenxane. The catalytic activity is strongly influenced by factors such as surface area, Pt particle size, fraction of surface Pt0 species, and electronic density of surface Pt species. On the other hand, the stability of this catalyst is closely associated with acid sites and hydroxyl groups present on the Al2O3 support. The superior performance observed in the Pt/Al2O3-700 catalyst can be attributed to its optimal combination of factors including high surface area, appropriate particle size of 1.4 nm, desirable amount of metallic Pt species on the surface, and moderate electron density of surface Pt species that provide a balance between accessible active sites and toluene desorption. Furthermore, its excellent stability can be attributed to an optimal ratio between acid sites and hydroxyl groups that effectively inhibit coke formation and sintering of Pt nanoparticles. This study emphasizes the importance of regulating a rational support with optimal properties to enhance the catalytic efficiency for cycloalkane dehydrogenation.

Hierarchical Pore Construction of Alumina Microrod Supports for Pt Catalysts Toward the Enhanced Performance of N-Heptane Reforming

Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

Engineering spatial locations of Pt in hierarchically porous KL zeolite by atomic layer deposition with enhanced n-heptane aromatization

In Situ Growth of Tungsten Oxide on Alumina to Boost the Catalytic Performance of Platinum for Glycerol Hydrogenolysis

Boosting Toluene Combustion in Pt-Co3O4 Catalysts by Directional Tuning Strong Metal-Support Interactions Through Metal-Organic Template Pyrolysis

A Mesoporous Nanorattle‐Structured Pd@PtRu Electrocatalyst

Fine-tuning Pt Nanoparticle and Coordination for Enhanced Catalytic Efficiency in Microwave-Assisted Methylcyclohexane Dehydrogenation over Pt/Al2O3 Catalysts

Optimizing Alkyne Hydrogenation Performance of Pd on Carbon in Situ Decorated with Oxygen-Deficient TiO2 by Integrating the Reaction and Diffusion

Salt-assisted surface charge driven synthesis of large pores alumina as carbon tolerance support for propane dehydrogenation

Rational Design of Porous Structures Via Molecular Layer Deposition As an Effective Stabilizer for Enhancing Pt ORR Performance

A template approach to designing and synthesizing hierarchical porous carbon with tri-modal pore structure and its application for high performance oxygen reduction electrocatalyst support

Formation of a Porous Crystalline Mg1‒ x Al2O y Overlayer on Metal Catalysts via Controlled Solid‐State Reactions for High‐temperature Stable Catalysis

Modulation of support properties in flower-like Pt/Al2O3 nanosheet catalysts for dehydrogenation of cycloalkanes

Dynamics-driven Tailoring of Sub-nanometric Pt-Ni Bimetals Confined in Hierarchical Zeolite for Catalytic Hydrodeoxygenation

Hierarchical porous Pt/Hβ catalyst with controllable acidity for efficient hydrogenation of naphthalene

Interface modulation of Pt/Al2O3 catalyst and their roles in thermal stability

Optimized porous nanostructure of carbon fibers enabling excellent stability of Pt-based catalysts for oxygen reduction reaction

Effect of Pore Structure on Ni/Al2O3 Microsphere Catalysts for Enhanced CO2 Methanation

Hierarchical porous carbon materials prepared by direct carbonization of Al-PCP as a Pt-catalyst support for the oxygen reduction reaction

Tailoring Pd/M@CoAlO Core-Shell Catalyst Morphology for Efficient Methane Oxidation

Mesoscopic Framework in Hierarchical Pt/Silicate-1 Zeolite Catalyst Enables stable low-temperature CO conversion