Design of Low-chromatic-dispersion Weakly-coupled Few Mode Fiber

Qichen He,Yao Li,Fei Gao,Mingqing Zuo,Haotian Cao,Yuyang Gao,Yongqi He,Zhangyuan Chen,Juhao Li

DOI: https://doi.org/10.1109/icocn53177.2021.9563714

2021-01-01

Abstract:We propose a low-chromatic-dispersion (CD) weakly-coupled FMF design method based on perturbation theory. 4-mode and 7-mode weakly-coupled FMFs with CD coefficients ranging from −8 to +8 ps/km/nm are designed.

What problem does this paper attempt to address?

Design and Numerical Optimization of A Mode Multiplexer Based on Few-Mode Fiber Couplers

Yiwei Xie,Songnian Fu,Hai Liu,Hailiang Zhang,Ming Tang,P. Shum,Deming Liu

DOI: https://doi.org/10.1088/2040-8978/15/12/125404

IF: 2.1

2013-01-01

Journal of Optics

Abstract:Mode division multiplexing (MDM) transmission based on few-mode fibers (FMFs) appears to be an alternative solution for overcoming the capacity limit of single-mode fibers (SMFs). A FMF coupler-based mode division multiplexer/demultiplexer (MMUX/DeMMUX) is proposed and theoretically investigated after the fabricated FMF is characterized. MMUXs/DeMMUXs with a mode contrast ratio (MCR) of more than 20 dB can be obtained for two-mode multiplexing and three-mode multiplexing over a wavelength span of 60 and 10 nm, respectively. We numerically verify the proposed MMUX/DeMMUX which has the advantages of high MCR, easy fabrication and maintenance, and low wavelength dependence.
Optimization of Few-Mode-Fiber Based Mode Converter for Mode Division Multiplexing Transmission

Yiwei Xie,Songnian Fu,Minming Zhang,M. Tang,P. Shum,Deming Liu

DOI: https://doi.org/10.1016/j.optcom.2013.05.016

IF: 2.4

2013-01-01

Optics Communications

Abstract:Few-mode-fiber (FMF) based mode division multiplexing (MDM) is a promising technique to further increase the transmission capacity of single mode fibers. We propose and numerically investigate a fiber-optical mode converter (MC) using long period gratings (LPGs) fabricated on the FMF by point-by-point CO2 laser inscription technique. In order to precisely excite three modes (LP01, LP11, and LP02), both untilted LPG and tilted LPG are comprehensively optimized through the length, index modulation depth, and tilt angle of the LPG in order to achieve a mode contrast ratio (MCR) of more than 20dB with less wavelength dependence. It is found that the proposed MCs have obvious advantages of high MCR, low mode crosstalk, easy fabrication and maintenance, and compact size.
Design of weakly-coupled ultra-flattened dispersion few-mode photonic crystal fiber

Xiao Lei,Fang Ren,Jinyu Zhang,Jingjing Niu,Yanfei Zhang,Yingjuan Ci,Xiaohui Wang,Jianping Wang

DOI: https://doi.org/10.1007/s11082-022-03697-6

IF: 3

2022-04-12

Optical and Quantum Electronics

Abstract:In this paper, a novel design of weakly-coupled few-mode photonic crystal fiber (FM-PCF) supporting 6 vector modes (HE11a, HE11b, TM01, HE21a, HE21b, TE01) with ultra-flattened chromatic dispersion is proposed. We investigate the impact of fiber parameters on chromatic dispersion, minimum effective refractive index difference (minΔneff), confinement loss, effective mode area, bending loss and nonlinear coefficient. To achieve ultra-flattened chromatic dispersion and large minΔneff, an extra small elliptical defected hole is introduced in the fiber core. The circular holes in the first ring are replaced by elliptical holes to further obtain flattened-chromatic dispersion. The simulation results show that the chromatic dispersion slope (< 2.1 × 10–5 ns/km/nm2) and large minΔneff (> 6 × 10–4) are obtained for the optimized fiber structure. And the proposed FM-PCF has low confinement loss (< 10−4 dB/km) and good bending resistance. The proposed fiber can achieve an ultra-flattened chromatic dispersion (< 0.032 ns/nm/km) of 6 vector modes around C-band, and has the potential applications for large-capacity mode division multiplexing communication systems.

engineering, electrical & electronic,optics,quantum science & technology
Machine learning aided inverse design for few-mode fiber weak-coupling optimization

Zhiqin He,Jiangbing Du,Xinyi Chen,Weihong Shen,Yuting Huang,Chang Wang,Ke Xu,Zuyuan He

DOI: https://doi.org/10.1364/OE.398157

IF: 3.8

2020-01-01

Optics Express

Abstract:Few-mode fiber (FMF) supporting many modes with weak-coupling is highly desired in mode division multiplexing (MDM) systems. The multi-parameter design of FMF becomes comparably difficult, inaccurate and time-consuming when it comes for complex fiber structures and many high order modes. In this work, we demonstrate a machine learning method using neural network to inversely design the desired FMF based on multiple-ring structure. By using the minimum index difference between adjacent modes as the weak-coupling optimization aim, we realize the inverse design of 4-ring step-index FMFs for supporting 4, 6 and 10 -mode operation, and 6-ring step-index FMF for supporting 20-mode operation. This method provides high-accuracy, high-efficiency and low-complexity for fast and reusable design of optical fibers, including particularly weak-coupling FMF in this work. It can be widely extended to a lot of fibers and has great potential for instantaneous applications in the optical fiber industry. (C) 2020 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Design of a Weakly-Coupled Ring-Core FMF and Demonstration of 6-Mode 10-Km IM/DD Transmission

Dawei Ge,Juhao Li,Jinglong Zhu,Lei Shen,Yuyang Gao,Jinyi Yu,Zhongying Wu,Zhengbin Li,Zhangyuan Chen,Yongqi He

DOI: https://doi.org/10.1364/ofc.2018.w4k.3

2018-01-01

Abstract:We design and fabricate a weakly-coupled ring-core 6-mode fiber with a minimum Δneff of 1.49×10-3, based on which 6-mode 10-km MDM transmission with OOK modulation and direct detection is experimentally demonstrated.
Low-CD weakly-coupled FMF for short-reach IM/DD MDM transmission.

Ruiting Cheng,Qichen He,Mingqing Zuo,Yu Yang,Chuyu Peng,Zhangyuan Chen,Yongqi He,Juhao Li

DOI: https://doi.org/10.1364/OE.500845

IF: 3.8

2023-01-01

Optics Express

Abstract:Weakly-coupled mode division multiplexing (MDM) technique is a promising candidate for capacity enhancement of short-reach optical interconnections, for which the multiple-ring-core few-mode fiber (MRC-FMF) has been proven to be an effective design method to suppress distributed modal crosstalk. Similar to low chromatic-dispersion (CD) O-band transmission based on single-mode fibers (SMF), all the mode channels in a weakly-coupled FMF for short-reach applications should achieve low CD to support intensity-modulation/direct-detection (IM/DD) transmission. In this paper, we propose, for the first time to the best of our knowledge, an index perturbation method to adjust both effective index and CD of each mode in an MRC-FMF. Firstly, an accurate modeling method to model the relationship between SiO-GeO material index and the germanium concentration at different wavelengths is proposed by analyzing the index characteristics of 4 kinds of germanium-doped fused silica SMFs at the same fabrication processing, which could be utilized to calculate the CD characteristics for an MRC-FMF with perturbed index profile. Then, based on the perturbation method considering the influences on both effective index and CD, a weakly-coupled low-CD MRC-FMF supporting 4 linearly-polarized (LP) modes is designed and fabricated. The measured minimum effective index difference min|Δn| among all modes is larger than 1.3 × 10, and the CD values of all the modes lie between -6 and +6 ps/km/nm ranging from 1280 to 1320 nm, which agree well with the design. The 2-km transmission experiment indicates that the fabricated MRC-FMF could support stable digital-signal-processing (DSP)-free IM/DD transmission for all the 4 LP modes. This work is beneficial to the application of short-reach weakly-coupled MDM systems.
A 6-LP-mode ultralow-modal-crosstalk double-ring-core FMF for weakly-coupled MDM transmission

Dawei Ge,Yuyang Gao,Yu Yang,Lei Shen,Zhengbin Li,Zhangyuan Chen,Yongqi He,Juhao Li

DOI: https://doi.org/10.1016/j.optcom.2019.06.015

IF: 2.4

2019-01-01

Optics Communications

Abstract:Weakly-coupled mode division multiplexing (MDM) technique based on few mode fiber (FMF) with low linear-polarized (LP) modal crosstalk is promising for capacity enhancement of short-reach transmission. In this paper, we propose a double-ring-core FMF for simultaneous 6-LP-mode weakly-coupled MDM transmission. FMF with ring-core structure is theoretically analyzed by deriving from a step-index circular-core FMF with perturbed ring areas. Then simplified method is proposed to define boundaries of ring areas in FMF and increase the minimum effective refractive index difference (min|Δneff|) among all the modes. Fabricated by commercial fabrication technique, the FMF achieves a min|Δneff| up to 1.49×10−3 while its maximum Δn between core and cladding is only 0.828%, which greatly reduces the difficulty of fiber fabrication. Thanks to the ultralow modal crosstalk of the FMF, we successfully demonstrate simultaneous 6-LP-mode (LP01, LP11, LP21, LP02, LP31 and LP12) 4-wavelength 71-km weakly-coupled MDM transmission using 10 Gb/s optical on-off-keying (OOK) intensity modulation and direct detection (IM/DD) without any digital signal processing (DSP). The design method can be extended to weakly-coupled FMFs with more ring areas.
Low-Loss All-Fiber Mode Multiplexers for Weakly-Coupled 4-Mode Fiber

Ruichun Wang,Ying Li,Tingting Dong,Jie Luo,Dai Lu,Liubo Yang,Jun Chu,Lei Zhang,Ying Han,Gaorong Han,Lei Shen

DOI: https://doi.org/10.1109/icocn59242.2023.10236171

2023-01-01

Abstract:In this paper, we report an all-fiber 4-mode fiber multiplexer and its measurement, which uses a fused tapering method to fabricate different mode-selective coupler. The insertion loss of a single mode-selective is less than 0.7dB, the insertion loss of LP 01 , LP 11 , LP 21 and LP 02 is less than 3 dB after cascading, while the modal crosstalk is lower than −15dB. This device can be applied in mode-division multiplexing transmission systems.
Inversely Designed Four Mode Fiber with Equalized Zero Dispersion for Short Reach MDM Optical Communication

Xinyi Chen,Jiangbing Du,Baining Ye,Zhiqin He,Ke Xu,Zuyuan He

DOI: https://doi.org/10.1364/oecc.2021.m4c.6

2021-01-01

Abstract:A four-mode fiber with equalized zero dispersion is inversely designed by using neuralnetwork for supporting short reach MIMOless and CDCless MDM optical communication. Only 0.017 standard deviation of dispersion at zero-dispersion-wavelength of 1550nm is achieved.
Active Learning Aided Four-Mode Fiber Design with Equalized Zero Dispersion for Short-Reach MDM Optical Communications

Xinyi Chen,Jiangbing Du,Baining Ye,Ke Xu,Zuyuan He

DOI: https://doi.org/10.1364/josab.457440

2022-01-01

Journal of the Optical Society of America B

Abstract:In this work, we demonstrate an active learning method for the optimized design of a few-mode fiber (FMF) with equalized zero dispersion between four modes, which can be used for short-reach mode-division-multiplexed (MDM) optical communication without multi-input-multi-output (MIMO) processing and chromatic dispersion compensation (CDC). To obtain the desired FMF, a multi-parameter design of a complex fiber structure is needed, which is usually very difficult, inaccurate, and time-consuming. The proposed active learning can utilize fewer data than the neural network to achieve improved prediction performance by selecting more valuable data. By balancing zero dispersion, equalized dispersion, and manufacturing feasibility, structure parameters of the four-ring step-index FMF supporting four modes are predicted by the active-learning-based inverse design. The standard deviation of four-mode dispersion of the designed fiber is 0.016. The total dataset is significantly reduced to 400 by using active learning and equalized zero dispersion is obtained. The equalized zero dispersion performance is characterized by using an optical parametric amplification (OPA) modal which is highly sensitive to dispersion. The broad OPA gains with high pump power and low amplification cross talk indicate that the designed FMF has low dispersion near to zero, low nonlinearity, and weak coupling for all four modes, which is highly suitable for high-speed MIMO-less and CDC-less MDM optical communications.
Inverse design of few-mode fiber by Neural Network for weak-coupling optimization

Zhiqin He,Jiangbing Du,Weihong Shen,Yuting Huang,Chang Wang,Ke Xu,Zuyuan He

DOI: https://doi.org/10.1364/OFC.2020.W2A.15

2020-01-01

Abstract:We use a neural network to inversely design a four-ring few-mode fiber for weak-coupling optimization so as to support MIMO-less MDM optical communication. This method provides high-accuracy, high-efficiency and low-complexity for complexed fiber design. (C) 2020 The Author(s)
Design of Large Effective Area Microstructured Optical Fiber for Dispersion Compensation

Yejin Zhang,Sigang Yang,Xiaozhou Peng,Yang Lu,Xiangfei Chen,Shizhong Xie

DOI: https://doi.org/10.1117/12.622444

2005-01-01

Abstract:A pure silica microstructured optical fiber(MOF) with seven dual cores is designed for chromatic dispersion compensation by a finite difference frequency domain(FDFD) method with a perfect matched layer(PML) boundary condition. The multi-core structure fiber is presented for the first time. The negative chromatic dispersion peak value of the designed microstructured fiber is -4500ps/nm.km and the full width at half maximum (FWHM) is evaluated at 12nm. Furthermore the effective area of the inner core fundamental mode can reach 65mm2 at 1550nm wavelength, which is three times that of a conventional dispersion compensating fiber (DCF).
Weakly-coupled 4-Mode Step-Index FMF and Demonstration of IM/DD MDM Transmission.

Tao Hu,Juhao Li,Dawei Ge,Zhongying Wu,Yu Tian,Lei Shen,Yaping Liu,Su Chen,Zhengbin Li,Yongqi He,Zhangyuan Chen

DOI: https://doi.org/10.1364/oe.26.008356

IF: 3.8

2018-01-01

Optics Express

Abstract:Weakly coupled-mode division multiplexing (MDM) over few-mode fibers (FMF) for short-reach transmission has attracted great interest, which can avoid multiple-input-multiple-output digital signal processing (MIMO-DSP) by greatly suppressing modal crosstalk. In this paper, step-index FMF supporting 4 linearity polarization (LP) modes for MIMO-free transmission is designed and fabricated for the first time, to our knowledge. Modal crosstalk of the fiber is suppressed by increasing the mode effective refractive index differences. The same fabrication method as standard single-mode fiber is adopted so that it is practical and cost-effective. The mode multiplexer/demultiplexer (MUX/DEMUX) consists of cascaded mode-selective couplers (MSCs), which are designed and fabricated by tapering the proposed FMF with single-mode fiber (SMF). The mode MUX and DEMUX achieve very low modal crosstalk not only for the multiplexing/demultiplexing but also for the coupling to/from the FMF. Based on the fabricated FMF and mode MUX/DEMUX, we successfully demonstrate the first simultaneous 4-modes (LP01, LP11, LP21 & LP31) 10-km FMF transmission with 10-Gb/s intensity modulation and MIMO-free direct detection (IM/DD). The modal crosstalk of the whole transmission link is successfully suppressed to less than -16.5 dB. The experimental results indicate that FMF with simple step-index structure supporting 4 weakly-coupled modes is feasible.
Coupling Analysis of Non-Circular-symmetric Modes and Design of Orientation-Insensitive Few-Mode Fiber Couplers

Jiaxiong Li,Jiangbing Du,Lin Ma,Ming-Jun Li,Shoulin Jiang,Xiao Xu,Zuyuan He

DOI: https://doi.org/10.1016/j.optcom.2016.08.051

IF: 2.4

2016-01-01

Optics Communications

Abstract:We study the coupling between two identical weakly-coupled few-mode fibers based on coupled-mode theory. The coupling behavior of non-circular-symmetric modes, such as LP11 and LP21, is investigated analytically and numerically. By carefully choosing the fiber core separation and coupler length, we can design orientation-insensitive fiber couplers for non-circular-symmetric modes at arbitrary coupling ratios. Based on the design method, we propose an orientation-insensitive two-mode fiber coupler at 850nm working as a mode multiplexer/demultiplexer for two-mode transmission using standard single-mode fiber. Within the band from 845 to 855nm, the insertion losses of LP01 and LP11 modes are less than 0.03dB and 0.24dB, respectively. When the two-mode fiber coupler is used as mode demultiplexer, the LP01/LP11 and LP11/LP01 extinction ratios in the separated branches are respectively above 12.6dB and 21.2dB. Our design method can be extended to two-mode communication or sensing systems at other wavelengths.
Design of Solid-Core Bragg Few-Mode Fiber for Short-Reach MDM Networks in O+C+L Band

Yuwei Su,Tianwen Zhangsun,Fang Ren,Yiying Zhang,Jie Yi,Wei Chen,Xiaojie Fan,Jianping Wang

DOI: https://doi.org/10.1016/j.optcom.2020.125245

IF: 2.4

2020-01-01

Optics Communications

Abstract:We propose a solid-core Bragg few-mode fiber with alternating layers of high/low refractive indices. The refractive index of the low-index layer in the cladding is the same as that of the fiber core. The influences of filling ratio, periodic structure width and core size on n(eff), Delta n(eff) and Alpha(eff) are investigated. Bending loss of each guided mode and differential mode delay (DMD) between adjacent spatial modes are also studied at 1550 nm. With appropriate geometrical parameters, the minimum effective refractive index difference (min Delta n(eff)) between adjacent modes is 2x10(-3) at 1550 nm. Wavelength-dependent performance is analyzed subsequently ranging from 1180 nm to 1630 nm. Numerical simulations indicate that such fiber could support 7 linearly polarized (LP) modes and have good bending insensibility performance. These results illustrate that the proposed fiber could be a promising candidate for mode division multiplexing to enhance optical transmission capacity.
Low-Loss 25.3 Km Few-Mode Ring-Core Fiber for Mode-Division Multiplexed Transmission

Yongmin Jung,Qiongyue Kang,Hongyan Zhou,Rui Zhang,Su Chen,Honghai Wang,Yucheng Yang,Xianqing Jin,Frank P. Payne,Shaif-ul Alam,David J. Richardson

DOI: https://doi.org/10.1109/jlt.2017.2658343

IF: 4.7

2017-01-01

Journal of Lightwave Technology

Abstract:We report the design, fabrication, and characterization of a few-mode ring-core fiber supporting four mode groups (i.e., seven spatial modes including spatial degeneracies). By carefully designing the ring-core parameters, the fiber can support only single-radial-order modes, which enables weak intermodal coupling between higher order modes and has potential to reduce the complexity of mode-division multiplexed digital signal processing. The low loss (similar to 0.3 dB/km) and long length (25.3 km) RCF is successfully fabricated and they are both records for a ring-core fiber.
Weakly Coupled 4-Mode Step-Index FMF and Demonstration of IM/DD MDM Transmission

Min Jiang,Jinglong Zhu,Jiali Wei,Juhao Li,Yongqi He,Zhangyuan Chen,Zhengbin Li

DOI: https://doi.org/10.1117/12.2519613

2019-01-01

Abstract:Weakly-coupled mode division multiplexing (MDM) over few-mode fiber (FMF) for short-reach transmission has attracted great interest, which can avoid multiple-input-multiple-output digital signal processing (MIMO-DSP) by greatly suppressing modal crosstalk. In this paper, step-index FMF supporting 4 linearity polarization (LP) modes for MIMO-free transmission is designed and fabricated for the first time. Modal crosstalk of the fiber is suppressed by increasing the mode effective refractive index differences. The same fabrication method as standard single-mode fiber is adopted so that it is practical and cost-effective. The mode multiplexer/demultiplexers (MUX/DEMUX) consists of cascaded mode-selective couplers (MSCs), which are designed and fabricated by tapering the proposed FMF with single-mode fiber (SMF). The mode MUX and DEMUX achieve very low modal crosstalk not only for the multiplexing/demultiplexing but also for the coupling to/from the FMF. Based on the fabricated FMF and mode MUX/DEMUX, we successfully demonstrate the first simultaneous 4-modes (LPoi, LP,,, LP21 & LP3i) 10-km FMF transmission with 10-Gb/s intensity modulation and MIMO-free direct detection (IM/DD).
Weakly-coupled Few-Mode Fibers and Their Applications

Huiyuan Liu,He Wen,Guifang Li

DOI: https://doi.org/10.3788/col202018.040601

2020-01-01

Abstract:Space-division multiplexing (SDM) has attracted significant attention in recent years because larger transmission capacity is enabled by more degrees of freedom (DOFs) in few-mode fibers (FMFs) compared with single-mode fibers (SMFs). To transmit independent information on spatial modes without or with minor digital signal processing (DSP), weakly-coupled FMFs are preferred in various applications. Several cases with different use of spatial DOFs in weakly-coupled FMFs are demonstrated in this work, including single-mode or mode-group-multiplexed transmission, and spatial DOFs combined with time or frequency DOF to improve the system performance.

Design of Low-chromatic-dispersion Weakly-coupled Few Mode Fiber

Design and Numerical Optimization of A Mode Multiplexer Based on Few-Mode Fiber Couplers

Optimization of Few-Mode-Fiber Based Mode Converter for Mode Division Multiplexing Transmission

Design of weakly-coupled ultra-flattened dispersion few-mode photonic crystal fiber

Machine learning aided inverse design for few-mode fiber weak-coupling optimization

Design of a Weakly-Coupled Ring-Core FMF and Demonstration of 6-Mode 10-Km IM/DD Transmission

Low-CD weakly-coupled FMF for short-reach IM/DD MDM transmission.

A 6-LP-mode ultralow-modal-crosstalk double-ring-core FMF for weakly-coupled MDM transmission

Low-Loss All-Fiber Mode Multiplexers for Weakly-Coupled 4-Mode Fiber

Inversely Designed Four Mode Fiber with Equalized Zero Dispersion for Short Reach MDM Optical Communication

Active Learning Aided Four-Mode Fiber Design with Equalized Zero Dispersion for Short-Reach MDM Optical Communications

Inverse design of few-mode fiber by Neural Network for weak-coupling optimization

Design of Large Effective Area Microstructured Optical Fiber for Dispersion Compensation

Weakly-coupled 4-Mode Step-Index FMF and Demonstration of IM/DD MDM Transmission.

Coupling Analysis of Non-Circular-symmetric Modes and Design of Orientation-Insensitive Few-Mode Fiber Couplers

Design of Solid-Core Bragg Few-Mode Fiber for Short-Reach MDM Networks in O+C+L Band

Low-Loss 25.3 Km Few-Mode Ring-Core Fiber for Mode-Division Multiplexed Transmission

Weakly Coupled 4-Mode Step-Index FMF and Demonstration of IM/DD MDM Transmission

Weakly-coupled Few-Mode Fibers and Their Applications