Abstract:One passive cooling approach is pumping energy to outer space through thermal radiation. Such a radiative cooling mechanism widely exists in nature and is important to maintain the temperature of the earth. However, natural materials generally have poor radiative cooling efficiency. To better utilize the radiative cooling for thermal management applications, the surface should be designed to have a high reflectivity in the solar spectrum and high emissivity in the "sky window" region (8–13µm in wavelength). In this work, we propose and demonstrate a highly scalable nanoparticle-based double-layer coating to achieve such selective radiative properties. Double-layer coatings consisting of a top reflective layer with high solar albedo and a bottom emissive layer are achieved by properly designed TiO2, SiO2, and SiC nanoparticles. These coatings were fabricated on both low- and high-emissivity substrates and their spectral radiative properties were characterized. The coating composed of TiO2 and SiO2 on a reflective substrate has excellent selective emission property for radiative cooling purpose. Under dry air conditions and assuming non-radiative heat transfer coefficient hc=4W/m2K, TiO2+SiO2 and TiO2+SiC can theoretically achieve about 17°C below ambient at night and 5°C below ambient under direct solar radiation (AM1.5). On-site measurements have also been conducted. Under direct solar irradiation, significant temperature reduction was observed for both aluminum and black substrate after the coating was applied. At nighttime, radiative cooling effect can cool the surface to a few degrees below ambient temperature. Although the theoretical cooling under dry weather condition is not observed, the experiment results can be well explained by theoretical calculations with the consideration of high humidity and non-radiative heat transfer. This nanoparticle-based approach can be easily applied to large area, which is a significant step of achieving large scale application of the radiative cooling technology.

Core-shell Particles for Devising High-Performance Full-Day Radiative Cooling Paint

Structural Rod-Like Particles for Highly Efficient Radiative Cooling

Biologically Inspired Shell-Hollow Particles for Designing Efficient Passive All-Sky Radiative Cooling

Design and scalable fabrication of core-shell nanospheres embedded spectrally selective single-layer coatings for durable daytime radiative cooling

Improved Abrasion-Resistant Coatings Using Designed Inorganic Particles for Durable Radiative Cooling

Scalable and paint-format colored coatings for passive radiative cooling

An inorganic water-based paint for high-durability passive radiative cooling

Full Daytime Sub-ambient Radiative Cooling with High Figure of Merit in Commercial-like Paints

Thin lamellar films with enhanced mechanical properties for durable radiative cooling

Low-cost waterborne radiative cooling paint for large scale production and application in buildings

A Pragmatic and High-Performance Radiative Cooling Coating with Near-Ideal Selective Emissive Spectrum for Passive Cooling

Scalable Aqueous Processing-Based Radiative Cooling Coatings for Heat Dissipation Applications

Full Daytime Sub-ambient Radiative Cooling in Commercial-like Paints with High Figure of Merit

Thin Nacreous Films with Enhanced Mechanical Properties for Highly Efficient Durable Radiative Cooling

Thin paints for durable and scalable radiative cooling

Double-layer Nanoparticle-Based Coatings for Efficient Terrestrial Radiative Cooling

Scalable Aqueous Processing‐Based Passive Daytime Radiative Cooling Coatings

Extreme-Environment Tolerant Superhydrophobic Montmorillonite/Hollow Sio2 Composite Coating As Building Radiative Cooler for Scale Energy Conservation

Vapor Exchange Induced Particles‐Based Sponge for Scalable and Efficient Daytime Radiative Cooling

Daytime Radiative Cooling with Clear Epoxy Resin

Durable and Robust Broadband Radiative Cooling Coatings for Multi-Temperature Scenarios