An As-Cast Nb-Si-based Alloy with Fine-Grains and Remarkable Fracture Toughness by Minor Sc Addition

Dezhi Chen,Qi Wang,Ruirun Chen,Zhecheng Zhou,Yanqing Su,Hengzhi Fu

DOI: https://doi.org/10.1016/j.jallcom.2021.162707

IF: 6.2

2021-01-01

Journal of Alloys and Compounds

Abstract:The effect of Sc addition on the phase composition, microstructure, and room-temperature fracture properties of arc melted Nb-Si-Ti-ZrC-based alloys was systematically investigated. The constituent phases of all alloys are Nbss, gamma-(Nb,X)(5)Si-3 and TiC. Sc refines the microstructure, while the grain sizes for the primary gamma-(Nb,X)(5)Si-3 and Nbss phases drop from 213 mu m and 22.3-23 mu m and 5.7 mu m, respectively. The content of Nbss and TiC decreases with increasing Sc. The Sc dissolves and then softens Nbss phase. The degree of restraint of Nbss phase decreases with increasing Sc content, therefore causing formation of dimples in the fracture and interface decohesion. Because of the refinement of the primary gamma-Nb5Si3 phase, the dimples and interface decohesion created by the low degree of constraint of Nbss phase, the K-Q value of Sc3 alloy becomes 16.4 MPa.m(1/2). The average grain size of Nbss phase becomes the lowest (5.7 mu m), when 0.5 at% Sc is added. The small grain size of Nbss phase deteriorates room-temperature fracture toughness. (C) 2021 Elsevier B.V. All rights reserved.