Abstract:Photothermal spectroscopy with the optical pump-probe configuration has been used for sensitive gas detection in hollow-core fibers. In this study, we demonstrate a new method of heterodyne interferometric photothermal gas sensing with a simplified sensor design and enhanced sensor stability. As a proof-of-principle, we used an interband cascade pump laser at 3.6 mu m for nitrous oxide (N2O) detection in a hollow-core anti-resonant fiber (HC-ARF). A Mach-Zehnder interferometer (MZI) with a 1.5 mu m near-infrared probe laser was implemented to measure the photothermal-induced refractive index change inside the HC-ARF. The probe laser was split into two beams, one transmitted through the HC-ARF and one frequency-shifted by using an acoustic-optic modulator. Both beams were recombined to generate a beat note signal, which was then demodulated by two cascaded lockin amplifiers to extract the photothermal signal. Based on the first harmonic detection of wavelength modulation, we achieved a normalized noise equivalent absorption (NNEA) coefficient of 7.7x10(-9) cm(-1) WHz(-1/2). Compared to conventional photothermal gas sensors with the MZI configuration, our new detection scheme eliminates the sophisticated opto-mechanical stabilization system and exhibits the intrinsic immunity to the power fluctuation of the probe laser.

Highly sensitive and stable photothermal gas sensor with a hollow-core fiber Fabry-Perot cavity

Low-coherence Photothermal Interferometry for Ultra-Sensitive Gas Sensing with Remarkable Stability

Ultrasensitive Photothermal Gas Sensor with a Dual-Mode Anti-Resonant Hollow-Core Fiber

High-Sensitivity Gas Pressure Sensor Based on Fabry–Pérot Interferometer with a Side-Opened Channel in Hollow-Core Photonic Bandgap Fiber

Hollow-core Fiber Photothermal Methane Sensor with Temperature Compensation

Photothermal Gas Detection With a Dithered Low-Finesse Fiber-Optic Fabry-Pérot Interferometer

Ultra-sensitive all-fibre photothermal spectroscopy with large dynamic range

Mode-phase-difference photothermal spectroscopy for gas detection with an anti-resonant hollow-core optical fiber

Oxygen Gas Sensing With Photothermal Spectroscopy In A Hollow-Core Negative Curvature Fiber

In-fiber Integrated Gas Pressure Sensor Based on a Hollow Optical Fiber with Two Cores

Mid-Infrared Photothermal Gas Sensor Enabled By Core-Cladding Mode Interference in a Hollow-Core Fiber

Hollow-core Fiber Cavity-Enhanced Photothermal Spectroscopy for Oxygen Detection

Photothermal gas detection using a miniaturized fiber Fabry-Perot cavity

Heterodyne Interferometric Photothermal Spectroscopy for Gas Detection in a Hollow-Core Fiber

Low-Coherence Photothermal Interferometry for Precision Spectroscopic Gas Sensing

A Dual-Cavity Fabry–Perot Interferometric Fiber-Optic Sensor for the Simultaneous Measurement of High-Temperature and High-Gas-Pressure

Characterization Of Infrared Gas Sensors Employing Hollow-Core Photonic Crystal Fibers

Multicomponent Trace Gas Detection with Hollow-Core Fiber Photothermal Interferometry and Time-Division Multiplexing

Parylene-C Diaphragm-Based Fiber-Optic Fabry-Perot Acoustic Sensor for Trace Gas Detection

Diaphragm-Free Fiber-Optic Fabry-Perot Interferometric Gas Pressure Sensor for High Temperature Application