Abstract:Permanent Magnet-Assisted Synchronous Reluctance Machines (PMASynRM) provide a low-cost alternative to Surface PM Machines due to the use of relatively lower grades of rare-earth (RE) or RE-free magnets, as the performance degradation due to weaker magnets is compensated by the presence of reluctance torque. However, the weaker magnets suffer from a high risk of demagnetization, leading to unreliable motor operation. Using a blend of RE and RE-free magnets has the potential to overcome this issue. This paper proposes to blend different grades of various rare-earth (RE) and rare-earth-free (RE-free) magnets in six different combinations and utilizes them in two-layer and three-layer U-shaped PMASynRM topologies with both eight-pole and six-pole variations. The rotor of the various designs is then optimized using a differential evolution (DE) based optimization algorithm to obtain low-cost designs with reduced RE magnet volume and minimum demagnetization risk. The optimization of each design is also integrated with the evaluation of mechanical stresses in the rotor laminations so as to maintain the stresses below the material yield strength. Furthermore, the various performance metrics, such as toque–speed/power–speed characteristics, demagnetization, and efficiency maps, are evaluated for each of the optimized and mechanically feasible designs. A quantitative comparison of the various optimized designs is also obtained to highlight the various trade-offs. The results indicate the feasibility of meeting the baseline torque requirement across the entire speed range, even with a 100% reduction in RE magnet volume and less than 5% demagnetization risk, while achieving a cost reduction exceeding 50%. Moreover, the two-layer, eight-pole designs exhibit relatively higher performance, whereas the three-layer, eight-pole designs are found to be the most economical option.

Design and Sensitivity Analysis of a High Performance Ferrite PM-Assisted Synchronous Reluctance Motor for Water Pump Applications

Sensitivity Analysis and Design of a High Performance Permanent-Magnet-Assisted Synchronous Reluctance Motor for EV Application

Design Optimization with Outer Rotor Interior Permanent Magnet Synchronous Motor with Hybird Permanent Magnet

Low Vibration and Noise Design of Integrated Permanent Magnet Synchronous Motor (PMSM)

Design and analysis of high power density permanent magnet-assisted synchronous reluctance motor

Design of A Novel Permanent Magnet Linear Synchronous Motor with Segmented Armature Core for Ropeless Lifter

Electromagnetic and Thermal Coupling Analysis of a Water-Cooled Double-Sided Permanent Magnet Linear Synchronous Motor

A Hybrid PM-Assisted SynRM with Ferrite and Rare-Earth Magnets

Electromagnetic Design Optimization Integrated with Mechanical Stress Analysis of PM-Assisted Synchronous Reluctance Machine Topologies Enabled with a Blend of Magnets

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

New Proposal of 80-Krpm High-Speed Surface-Mounted Permanent-Magnet Synchronous Motor

Thrust Optimization and Thermal Analysis of a Water-Cooled Double-Sided Permanent Magnet Linear Synchronous Motor

Nonlinear Analytical Model-Embedded Optimal Design for ER-PMSM

Optimization and performance of linear PM-assisted reluctance synchronous machine for wave energy generation

Design and Electromagnetic Analysis of a Double-Sided Permanent Magnet Linear Synchronous Motor

Ferrite PM Optimization of SPM BLDC Motor for Oil-Pump Applications According to Magnetization Direction

Design of High-Speed Permanent Magnet Motor Considering Rotor Radial Force and Motor Losses

Design and Optimization of Synchronous Motor Using PM Halbach Arrays for Rim-Driven Counter-Rotating Pump

Comparative Study on Synchronous Reluctance and PM Machines

Design and Prototyping of a Novel Line-Start Permanent Magnet Assisted Synchronous Reluctance Motor for Fan Application

Analysis and Design of Synchronous Reluctance Machines Part Ⅻ: Investigation of Permanent Magnet Assisted Synchronous Reluctance Machines