Abstract:Tendon-driven continuum robots are of great promise in dexterous manipulation in long-narrow spaces, such as in-situ maintenance of aeroengines, due to their slender body and compliant hyper-redundant architecture. However, major challenges in implementing this come from mechanical design and morphology estimation: torsion and buckling issues induced by the intrinsic compliant architecture and the coupling of system gravity and distal loads; and low-accuracy morphology model influenced by complex load conditions. In this article, inspired by the contact-aided compliant mechanisms (CACMs), a novel continuum robotic system using the bearing-based CACM is developed to overcome the two intrinsic issues (i.e., torsion and buckling) while eliminating the implied wear due to friction at joint/socket interfaces without affecting its stiffness adversely. Subsequently, based on the chained beam constraint model, a comprehensive kinetostatic modeling framework is systematically derived, focusing on mechanism-oriented strategies (i.e., tendon routing friction, physical joint constraint, and section buckling estimation). Finally, various experiments are performed to verify the effectiveness of both our designed hardware and algorithm. It is demonstrated that the robotic system with such hardware and algorithm achieving the torsional stiffness outperforms the twin-pivot design at least 24 times, stiffness enhancement > 100 times, morphology error < 2.5% of the manipulator length, and avoiding the first-order instability. Additionally, we demonstrate the navigation experiment by using two developed control strategies to show the performances of the robotic system.

Soft-CCD Algorithm for Inverse Kinematics of Soft Continuum Manipulators.

CIDGIKc: Distance-Geometric Inverse Kinematics for Continuum Robots

The Natural-CCD Algorithm, a Novel Method to Solve the Inverse Kinematics of Hyper-redundant and Soft Robots

A soft computing approach for inverse kinematics of robot manipulators

FABRIKc: an Efficient Iterative Inverse Kinematics Solver for Continuum Robots

An Optimization-Based Inverse Kinematics Solver for Continuum Manipulators in Intricate Environments

Computational Design of Skinned Quad-Robots

An Efficient Inverse Kinematics Algorithm For Continuum Robot With A Translational Base

Kinematic Modeling and Control of Variable Curvature Soft Continuum Robots

Visual Servoing of Soft Robot Manipulator in Constrained Environments with an Adaptive Controller

A Novel Contact-aided Continuum Robotic System: Design, Modeling, and Validation

Efficient and Scalable Inverse Kinematics for Continuum Robots

Kinematic Modeling and Control of a Soft Robotic Arm with Non-constant Curvature Deformation

Kinematics Modeling Method of Continuum Space Manipulator Based on Virtual Discrete-Jointed Manipulator Models

Visual Servo Control Of Cable-Driven Soft Robotic Manipulator

Dynamical Modeling and Control of Soft Robots with Non-constant Curvature Deformation

An optimization framework for simulation and kinematic control of Constrained Collaborative Mobile Agents (CCMA) system

Combining closed-form and numerical solutions for the inverse kinematics of six-degrees-of-freedom collaborative handling robot

Kinematic Modeling and Characterization of Soft Parallel Robots

Kinetostatics Modeling and Analysis of a Spherical Parallel Continuum Manipulator

Optimized inverse kinematics algorithm for onboard craning manipulator