Abstract:Based on the requirements of microgrids and Uninterruptible Power Supply systems, an MJ-class energy storage device is necessary to enhance the stability of microgrids during power interruptions and outages. This study focuses on optimizing the design routines of an MJ-class Superconducting Magnetic Energy Storage (SMES) unit using an intelligent optimization method known as Non-dominated Sorting Genetic Algorithm II. SMES units are among the potential storage devices for future power systems. However, due to their cooling cost, weight, and energy density, they have not yet been commercialized for power system applications. In this regard, this study discusses the impact of considering mechanical, economic, magnetoelectric, and physical objective functions during the design optimization of MJ-class SMES, as novel design functions for SMES units. The following objective functions were employed: maximization of energy density, minimization of total weight, minimization of total cooling cost, and minimization of maximum applied strain. Different loading factors were also analyzed to demonstrate their importance in the final design of SMES. This has been conducted to show how loading factor could change the final design of the SMES units. Here, loading factor is considered as the ratio of operational current to the critical current of the high temperature superconducting tapes. Results indicate that considering all the objective functions during the optimization process of SMES leads to a more realistic final design, presenting an SMES unit with a feasible structure for operation and manufacturing. Additionally, the increase in loading factor was found to reduce the heat load, increase the maximum applied strain, and raise the weight of the SMES. This underscores the significance of considering this parameter during the design process of SMES. Finally, the results of analytical model used for design of SMES have been compared with finite element results to validate the model used in this study.

Influence Analysis of SMES Magnet Design Scheme on Its Voltage Distribution Characteristic

Analytical Calculation and Parameter Analysis of Air-Gap Magnetic Field Distribution in Permanent Magnet Synchronous Motor With Partition-Between-Poles Halbach Magnet

35 Kj/7 Kw Conduction-cooled High Tc Superconducting Magnet Energy Storage

Design of Shimming Rings for Small Permanent MRI Magnet Using Sensitivity-Analysis-Based Particle Swarm Optimization Algorithm

The optimal design of 300MJ HTS superconducting magnetic energy storage system

Design And Optimizations Of Solenoid Magnetic Structure For Inductive Power Transfer In Ev Applications

Optimized Design and Electromagnetic-Thermal- Mechanical Analysis of a Toroidal D-Shaped Superconducting Magnet in 5 MW LIQHY-SMES System

Design and cost estimation of superconducting magnetic energy storage (SMES) systems for power grids

The Optimal Design of a 300~MJ Superconducting Magnet Using HTS Tapes

Design and FEM analyses of solenoidal coils and magnetic shielding of 1-MJ SMES

The Optimal Design Of A 300mj Superconducting Magnet Using Hts Tapes

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Optimization Design of SMES Solenoids Considering the Coil Volume and the Magnet Volume

Optimized Design of High Torque Density Permanent Magnet Synchronous Motor with Halbach Magnet

Multi-Objective Optimal Design of High-Speed Surface-Mounted Permanent Magnet Synchronous Motor for Magnetically Levitated Flywheel Energy Storage System

Electromagnetic, cooling, and strain-based multi-objective optimization of superconducting magnetic energy storage unit for power grid applications

Design of SMES Control System for Smoothing Power Fluctuations in Wind Farms

A Novel PCS Control Strategy for SMES to Suppress Overvoltage of Magnet

Design and Analysis of Superconducting Magnets of a New Mixed Maglev Model

Modeling and Electromagnetic Optimization Based on Combined Optimization Method for Solenoid Superconducting Magnet

Stress Reduction And Storage Capacity Enhancement Of The Hts-Smes Using Reinforcing Overbanding Structure