Abstract:In this paper, a terahertz low-loss transmission line based on spoof surface plasmon polaritons (SSPPs) is proposed, and a terahertz rejection filter with high isolation is demonstrated by loading split-ring resonators (SRRs). The SSPPs-based transmission line is optimized by an irregular gradient transition structure, and thus its transmission loss and unevenness in the terahertz frequency band are reduced. Then, the frequency band suppression mechanisms of the SSPPs-based transmission line loaded with SRRs and without SSRs are revealed through the dispersion analysis. When the SSPPs-based transmission line loaded with SRRs operates under the fundamental mode and the first-order high mode separately, its fundamental mode is characterized by low pass while its first-order high mode features bandpass, and thus the terahertz filtering characteristic of pass-stop-pass-stop is achieved. In addition, by adjusting the geometric parameters of SRRs, we can control the stop-band frequency of the SSPPs-based filter and improve the suppression depth of the SSPPs filter by increasing the number of loaded SRRs. To demonstrate the feasibility of the design, this study conducts terahertz on-wafer tests for the proposed SSPPs-based transmission line and filter prepared by micro-nano fabrication. The results reveal that in the frequency band of 0.11-0.17 THz, the insertion loss of the SSPPs-based transmission line is less than 0.5 dB/mm, and the return loss is better than 10 dB; in the frequency band of 0.142-0.156 THz, the suppression depth of the SSPPs-based filter is greater than 10 dB, and the maximum suppression depth is up to 45 dB at 0.148 THz. The experimental results are in good agreement with the simulated ones. The research is of great significance to the integrated system of terahertz plasmons.

Frequency Splitter with High Isolation Based on Spoof Surface Plasmon Polaritons

A Broadband Rejection Filter Based on Spoof Surface Plasmon Polaritons

Frequency Splitting Based on Spoof Surface Plasmon Polaritons Coplanar Waveguide

Broadband Nonreciprocal Spoof Plasmonic Phase Shifter Based on Transverse Faraday Effects

Design of Terahertz Low-Loss Transmission Line and Band-Stop Filter Based on Spoof Surface Plasmon Polaritons

Spoof Surface Plasmon Polaritons Developed from SIW Using Ring Slots and Vias

A Two-Way THz Frequency Splitter Using CPS-Based SSPPs

Circulator based on spoof surface plasmon polaritons

Design of Frequency Selective Surface Based on Spoof Surface Plasmon Polariton Modes

Multi-band propagation of spoof surface plasmon polaritons by its high-order modes

Breaking the challenge of signal integrity using time-domain spoof surface plasmon polaritons

Multifunctional Spoof Plasmonic Transmission Line with Dynamically Switchable Modes

Spoof Surface Plasmon Polaritons for High-Efficiency Terahertz Power Combiner

An Ultra-Compact Rejection Filter Based on Spoof Surface Plasmon Polaritons

Multiband Modulated Spoof SPP Transmission Based on a Combined Structure

Spoof Surface Plasmon Polaritons Supported by Substrate Integrated Waveguide with Arrays of Holes

Spoof Surface Plasmonic Waveguide and Its Band-Rejection Filter Based on H-shaped Slot Units

Short-circuited Stub-Loaded Spoof Surface Plasmon Polariton Transmission Lines with Flexibly Controllable Lower Out-of-band Rejections

Terahertz spoof surface plasmon polaritons unidirectional coupling via slit pair

Generation and Manipulation of Lower Out-of-Band Rejections of Spoof Surface Plasmon Polaritons

Filtering Balun Based on Spoof Surface Plasmon Polariton