Abstract:Abstract Changes in the measured structural responses, such as deflections and modal properties, induced by damage could be significantly smaller than those by environmental effects such as temperature and temperature gradients. To make the structural health monitoring more reliable and applicable to real structures, it is highly desirable to develop a methodology to distinguish the changes due to the structural damage from those by the environmental variations. In this study, a novel method to extract the damage-induced deflection under temperature variations is presented using the outlier analysis on the correlation of deflection components obtained using the modal flexibility matrix. The main idea is that temperature change in a bridge would produce global increase or decrease in deflections over the whole bridge. On the other hand, structural damages may cause local variations in deflections near the damage locations. Hence, the correlation analysis between the deflection measurements may show high abnormality near the damage locations. The proposed procedure may be summarized: (1) identification of the modal flexibility matrix from acceleration measurements, (2) calculation of the positive-bending-Inspection-load deflection using the modal flexibility for each damage and temperature case, (3) construction of the outlier-threshold for the correlation of the intact deflection at different locations, and (4) damage detection using the outlier analysis on the correlation of the deflection for damage cases. To verify the applicability of the proposed method, a series of laboratory tests were carried out on a bridge model with a steel box-girder. Nineteen experiments were carried out for the first 2 days under daily temperature variations to construct the correlation data for the intact deflection, and 51 experiments were performed for two damage scenarios for the next 12 days. It has been found that the damage existence and location were detected successfully for a case with relatively small damage under the temperature variations.

Eliminating the Bridge Modal Variability Induced by Thermal Effects Using Localized Modeling Method

Correlating Modal Properties with Temperature Using Long-Term Monitoring Data and Support Vector Machine Technique

Probabilistic Damage Detection of Long-Span Bridges Using Measured Modal Frequencies and Temperature

Strain-temperature Correlation Analysis of a Tied Arch Bridge Using Monitoring Data

Modeling of Temperature–Frequency Correlation Using Combined Principal Component Analysis and Support Vector Regression Technique

Correlation Study on Modal Frequency and Temperature Effects of A Cable-Stayed Bridge Model

Early Warning Method of Structural Damage Using Localized Frequency Cointegration under Changing Environments

Early Anomaly Warning of Environment-Induced Bridge Modal Variability Through Localized Principal Component Differences

Mitigating Effects of Temperature Variations Through Probabilistic-Based Machine Learning for Vibration-Based Bridge Scour Detection

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Modal Identification of Bridges under Varying Environmental Conditions: Temperature and Wind Effects

Bridge Performance Warning Based on Two-Stage Elimination of Environment-Induced Frequency

Automatic Modal Frequency Identification of Bridge Cables under Influence of Abnormal Monitoring Data

Temperature Effects on Frequency-Based Damage Detection in Plate-Girder Bridges

Data-Driven Modal Equivalent Standardization for Early Damage Detection in Bridge Structural Health Monitoring

Early Warning of Abnormal Bridge Frequencies Based on a Local Correlation Model under Multiple Environmental Conditions

Temperature Effects Removal from Non-Stationary Bridge-Vehicle Interaction Signals for ML Damage Detection

Finite element model of a cable-stayed bridge updated with vibration measurements and its application to investigate the variation of modal frequencies in monitoring

Nonlinear Uncertainty Modeling Between Bridge Frequencies and Multiple Environmental Factors Based on Monitoring Data

Damage Detection of Bridge Structures Using Modal Flexibility under Temperature Variations

Damage Warning of Suspension Bridges Based on Neural Networks under Changing Temperature Conditions