Abstract:The present work demonstrated that secondary pulp/paper sludge powder, with a higher heating value of 18.3MJ/kg on a dry basis, could be effectively converted into liquid oil products by direct liquefaction in hot-compressed water with and without catalyst. Treatments of secondary pulp/paper sludge in water at 250-380 degrees C for 15-120min in the presence of N(2) atmosphere resulted in yields of water-soluble oils at 20-45wt% and yields of heavy oils at 15-25wt%, with higher heating values of 10-15 and >35MJ/kg, respectively. The higher caloric values for the heavy oil products were accounted for by their compositions of long-chain carboxylic acids, heterocyclic nitrogen compounds and phenolic compounds and derivatives as evidenced by the gas chromatograph (GC)/MS measurements. The liquefaction product yields were significantly influenced by the liquefaction temperature, the residence time, the initial biomass concentration, catalysts and the liquefaction atmosphere (inert or reducing). Within the temperature range (250-380 degrees C) tested, the lowest temperature produced the highest yield of total oils (at 60wt%), while the greatest yield of heavy oil (at about 24wt%) was obtained at 350 degrees C. If the temperature was fixed at 280 degrees C, a greater yield of heavy oil (reaching as high as 25wt% for 120min) was obtained as the length of reaction time increased. Similarly, a higher initial biomass concentration produced a greater yield of heavy oil but a reduced yield of water-soluble oil. The presence of 0.1M K(2)CO(3) dramatically enhanced organic conversion, but suppressed the formation of both heavy oil and water-soluble oil. The use of the two alkaline earth metal catalysts, i.e., Ca(OH)(2) and Ba(OH)(2), did not alter organic conversion, but it catalyzed the formation of water-soluble oil and produced higher yields of total oil products. It was also demonstrated that the reducing atmosphere (i.e., H(2)) in the liquefaction process promoted the heavy oil formation while suppressing the water-soluble oil formation. With the presence of 0.1M Ca(OH)(2) and 2MPa H(2), liquefaction of the sludge powder in water at 280 degrees C for 60min produced a higher yield of heavy oil (26wt%), almost two times as high as that in N(2) (13.6wt%), resulting in a greater net energy efficiency. It was thus suggested that direct liquefaction of secondary pulp/paper sludge in hot-compressed water with Ca(OH)(2) catalyst and in the presence of H(2) could be an effective approach to recovering energy from the waste for production of liquid oil products.

Paper Mill Sludge Biochar To Enhance Energy Recovery From Pyrolysis: A Comprehensive Evaluation And Comparison

Ex-Situ Catalytic Pyrolysis of Wastewater Sewage Sludge - A Micro-Pyrolysis Study

Mesoporous Silica Nanocatalyst-Based Pyrolysis of a By-Product of Paper Manufacturing, Black Liquor

Autocatalytic Sludge Pyrolysis by Biochar Derived from Pharmaceutical Sludge for Biogas Upgrading

Enhanced Energy and Resource Recovery Via Synergistic Catalytic Pyrolysis of Byproducts from Thermal Processing of Wastewater Solids

Sewage sludge pyrolysis 'kills two birds with one stone': Biochar synergies with persulfate for pollutants removal and energy recovery

Energy recovery from sewage sludge waste blends: Detailed characteristics of pyrolytic oil and gas

Co-pyrolysis of Paper Mill Sludge and Spend Coffee Ground Using CO2 As Reaction Medium

Advancements and Synergistic Mechanism about Co-Pyrolysis of Oily Sludge and Agricultural Biomasses：a Review

Co-pyrolysis of refinery oil sludge with biomass and spent fluid catalytic cracking catalyst for resource recovery

Comprehensive kinetic modeling and product distribution for pyrolysis of pulp and paper mill sludge

Co-pyrolysis of sewage sludge and sawdust: Synergistic effects of product yield and synthetic gas calorific value

Preparation of biochar and its adsorbing performance evaluation in the petroleum hydrocarbon

Sorption-catalysis-enhanced effects of crab shell derived CaO-based biochar addition on the pyrolysis of waste cooking oil fried sludge

Pyrolysis Characteristics and Products Distribution of Petroleum Sludges

Co-pyrolysis re-use of sludge and biomass waste: Development, kinetics, synergistic mechanism and industrialization

Catalytic co-pyrolysis of solid wastes (low-density polyethylene and lignocellulosic biomass) over microwave assisted biochar for bio-oil upgrading and hydrogen production

Kinetics study of pyrolysis of petroleum sludge and characterization of char

Advantages of Co-Pyrolysis of Sewage Sludge with Agricultural and Forestry Waste

Conversion of secondary pulp/paper sludge powder to liquid oil products for energy recovery by direct liquefaction in hot-compressed water

Enhancing hydrogen-rich fuel gas production from dewatered sludge pyrolysis: The effect of hybrid conditioning with peroxyacetic acid, polyaluminium chloride, and KOH-modified activated carbon