Abstract:In this research, a novel interfacial enhanced thin film composite nanofiltration (TFC NF) membrane with nail-fixed like surface structure and wave line like cross-section structure, good permeability and superior interfacial stability was prepared by interfacial polymerization (IP) on one-step in-situ aminated polyvinyl chloride (APVC) support layer. The effects of amination agent (triethylenetetramine, TETA) content on the support layers and the effects of the support layers with different degrees of amination on the performance of the TFC NF membranes were studied comprehensively. Furthermore, the interfacial bonding strength of the TFC NF membrane was explored by the inverse permeation test. It was concluded from the results that higher TETA content in casting solution led to the APVC membrane to form macroporous surface structure, thinner top skin layer and larger mean pore size. Meanwhile, more TETA molecules were grafted onto the PVC chains through nucleophilic substitution to participate in IP in a synergistic manner. Accordingly, the corresponding TFC NF membrane formed a nail-fixed like surface structure similar to semi-free-standing polyamide (PA) layer and wave line like cross-section structure with thinner and denser active layer. The water flux of the TFC NF membrane prepared with the optimized APVC membrane as the substrate membrane was increased by 395% at 0.6 MPa compared with the TFC NF membrane prepared with PVC membrane as the substrate membrane, while Na2SO4 rejection did not sacrifice and increased by 3.48%, which manifested that unique structure was favorable to speed up the water transmission and effectively conquered the trade-off effect. Moreover, the representative TFC NF membrane prepared with optimized APVC membrane as the substrate membrane with strong covalent bond between support layer and active layer demonstrated superior interfacial stability in the short-term circulating inverse permeation test.

Facile Preparation of Polyvinylidene Fluoride Substrate Supported Thin Film Composite Polyamide Nanofiltration: Effect of Substrate Pore Size

Polyamide/PVC Based Composite Hollow Fiber Nanofiltration Membranes: Effect of Substrate on Properties and Performance

Fabrication and Performance of a Low Operating Pressure Nanofiltration Poly(vinyl Chloride) Hollow Fiber Membrane

Aminated Substrate Based Thin Film Composite Nanofiltration Membrane with High Separation Performance by Chemically Inhibiting the Intrusion of Polyamide

An Acid Resistant Nanofiltration Membrane Prepared from a Precursor of Poly(s-Triazine-amine) by Interfacial Polymerization

Functional and Surface-Active Membranes from Poly(vinylidene Fluoride)-Graft-poly(acrylic Acid) Prepared Via RAFT-mediated Graft Copolymerization.

Effects of Polyvinylidene Fluoride Substrate Characteristics on the Selectivity of Thin‐film Composite Nanofiltration Membrane

A Facile Strategy toward the Preparation of a High-Performance Polyamide TFC Membrane with a CA/PVDF Support Layer

Constructing nanofiltration membrane on hydrophobic PVDF and PTFE substrates via reverse interfacial polymerization

Preparation of high permeance thin-film composite nanofiltration membrane on macroporous ceramic support

Interface Engineering of Microporous Polypropylene Membranes for Polyamide Thin-Film Composite Nanofiltration Membranes with Robust Structure and Superior Performance

Effects of Porogen PEG and Pore Structure of PVDF Substrates on the Permeability-Selectivity Trade-off of TFC-NF Membranes

Fabrication and Performance of Novel Poly(piperazine-amide) Composite Nanofiltration Membranes Based on Various Poly(m-phenylene Isophthalamide) Substrates

High Efficient Thin-Film Composite Membrane: Ultrathin Hydrophilic Polyamide Film on Macroporous Superhydrophobic Polytetrafluoroethylene Substrate

Photothermal-driven interfacial-polymerized ultrathin polyamide selective layer for nanofiltration

The Preparation and Performance Study of Polyamide Film Based on PDA@MWCNTs/PVDF Porous Support Layer

Polyamide nanofiltration membranes by vacuum-assisted interfacial polymerization: Broad universality of Substrate, wide window of monomer concentration and high reproducibility of performance

Preparation of hydrophilic and fouling resistant poly(vinylidene fluoride) hollow fiber membranes

Preparation of the interfacial enhanced PA/APVC nanofiltration membrane based on the in-situ amination of substrate membrane

Dissecting the Role of Substrate on the Morphology and Separation Properties of Thin Film Composite Polyamide Membranes: Seeing Is Believing

High permeance of polyamide nanofiltration membranes with porous organic polymers interlayers based on diazo coupling reaction