Abstract:Fabricating nanofiltration membranes with high water permeance and selectivity by tailoring the structure and morphology is crucial to efficient water purification. In this work, the fabrication of thin film nanocomposite (TFN) nanofiltration membranes by combining two methods, the surfactant-assembly interfacial polymerization (SARIP) and the addition of graphene oxide (GO) or ionic liquid functionalized graphene oxide (GO-IL) for the preparation of the selective PA layer on a novel porous substrate is reported. For the preparation of the porous substrate, mechanically robust, aromatic polyethers containing polar pyridine units (PDSPP) were chosen targeting to improved hydrophilicity and thus enhanced water permeability. The anionic sodium dodecyl sulfate (SDS) surfactant was used to regulate the interfacial polymerization thereby enabling the formation of dense PA layers with high cross-linking degree and consequently high salt rejections. On the other hand, the addition of GO/GO-IL nanosheets could impart hydrophilicity and antifouling properties. The novel porous PDSPP substrate was selected for the fabrication of TFN membranes due to its improved water permeability and superior salt rejection and increased hydrophilicity compared to commercial PSf substrate. The detailed study of the fabricated TFN membranes by ATR-FT-IR, SEM, AFM, XPS, contact angle measurements revealed the formation of polyamide selective layers with rougher surfaces, increased hydrophilicity and high cross-linking degrees (from 44 % to 94 %), resulted from the synergistic effect of SDS and GO incorporation. Moreover, the prepared TFN membranes exhibited high salt rejections while maintaining a moderate water permeability. In particular, the membrane containing the neat GO (TFNGO50) displayed excellent Na 2 SO 4 and MgSO 4 rejections (98.8 % and 99.5 %, respectively) while the NaCl rejection was 47.0 % and a water permeability value of 4.2 L m -2 h −1 bar −1 . The divalent salt rejections were among the highest values reported in the literature in comparison with commercial NF membranes and TFN membranes containing GO/functionalized GO. When GO-IL nanosheets were embedded in the PA layer, the water permeability was slightly improved while the salt rejections were significantly reduced compared to TFNGO50. Lastly, the incorporation of GO enhanced the anti-fouling properties of the prepared membranes due to increased hydrophilicity of the PA surface.

Preparation of Poly(piperazine-Amide) Nanofilms with Micro-Wrinkled Surface Via Nanoparticle-Templated Interfacial Polymerization: Performance and Mechanism

Hydrophilic Modified Polydopamine Tailored Heterogeneous Polyamide in Thin-Film Nanocomposite Membranes for Enhanced Separation Performance and Anti-Fouling Properties

A Novel Thin-Film Nano-Templated Composite Membrane with in Situ Silver Nanoparticles Loading: Separation Performance Enhancement and Implications

In-situ Interfacial Polymerization of Polyamide TFN Membranes by Adding a Diamino-Silane Coupling Agent: Toward Enhanced Desalination Performance

Micelles regulated thin film nanocomposite membrane with enhanced nanofiltration performance

Nanofiltration membranes with enhanced performance by constructing an interlayer integrated with dextran nanoparticles and polyethyleneimine coating

Molecular Design of the Polyamide Layer Structure of Nanofiltration Membranes by Sacrificing Hydrolyzable Groups Toward Enhanced Separation Performance.

Enhancing the perm-selectivity of thin-film nanocomposite membranes intercalated with cyclodextrin-chelated Metal-Organic Framework via modulated interfacial polymerization

An Efficient Co-Solvent Tailoring Interfacial Polymerization for Nanofiltration: Enhanced Selectivity and Mechanism

Innovative construction of nano-wrinkled polyamide membranes using covalent organic framework nanoflowers for efficient desalination and antibiotic removal

Polyamide Membrane with Nanoscale Stripes and Internal Voids for High-Performance Nanofiltration

Crumple-textured Polyamide Membranes Via MXene Nanosheet-Regulated Interfacial Polymerization for Enhanced Nanofiltration Performance

Ultrathin Thin-Film Composite Polyamide Membranes Constructed on Hydrophilic Polyvinyl Alcohol Decorated Support Toward Enhanced Nanofiltration Performance.

A thin film nanocomposite membrane with pre-immobilized UiO-66-NH2 toward enhanced nanofiltration performance

Nanofiltration Membrane with a Mussel-Inspired Interlayer for Improved Permeation Performance.

High-performance Nanofiltration Membranes with a Polyamide-Polyester Composite Layer and a Polydopamine Surface Layer for Desalination and Dye Pollutant Removal

Nanofiltration Membranes with Hydrophobic Microfiltration Substrates for Robust Structure Stability and High Water Permeation Flux

Water recovery from the high salinity brine: Effect of the interlayer structure in the polyamide nanofiltration membrane

GO and surfactant assisted regulation of polyamide nanofiltration membranes for improved separation performance

Tuning the nano-porosity and nano-morphology of nano-filtration (NF) membranes: Divalent metal nitrates modulated inter-facial polymerization

Structurally ordered nanofiltration membranes prepared by spatially anchoring interfacial polymerization for highly efficient separation properties