Abstract:Cu/ZrO2 catalysts have demonstrated effective in hydrogenation of CO2 to methanol, during which the Cu-ZrO2 interface plays a key role. Thus, maximizing the number of Cu-ZrO2 interface active sites is an effective strategy to develop ideal catalysts. This can be achieved by controlling the active metal size and employing porous supports. Metal-organic frameworks (MOFs) are valid candidates because of their rich, open-framework structures and tunable compositions. UiO-66 is a rigid metal-organic skeleton material with excellent hydrothermal and chemical stability that comprises Zr as the metal center and terephthalic acid (H2BDC) as the organic ligand. Herein, porous UiO-66 was chosen as the ZrO2 precursor, which can confine Cu nanoparticles within its pores/defects. As a result, we constructed a Cu-ZrO2 nanocomposite catalyst with high activity for CO2 hydrogenation to methanol. Many active interfaces could form when the catalysts were calcined at a moderate temperature, and the active interface was optimized by adjusting the calcination temperature and active metal size. Furthermore, the Cu-ZrO2 interface remained after CO2 hydrogenation to methanol, as confirmed by transmission electron microscopy (TEM), demonstrating the stability of the active interface. The catalyst structure and hydrogenation activity were influenced by the content of the active component and the calcination temperature; therefore, these parameters were explored to obtain an optimized catalyst. At 280 degrees C and 4.5 MPa, the optimized CZ-0.5-400 catalyst gave the highest methanol turnover frequency (TOF) of 13.4 h(-1) with a methanol space-time yield (STY) of 587.8 g.kg(-1).h(-1) (calculated per kilogram of catalyst, the same below), a CO2 conversion of 12.6%, and a methanol selectivity of 62.4%. In situ diffuse-reflectance infrared Fourier transform spectroscopy (DRIFTS) of CO adsorption over the optimized catalyst revealed a predominant, unreducible Cu+ species that was also identified by X-ray photoelectron spectroscopy (XPS). The favorable activity observed was due to this abundant Cu+ species coming from the Cu+-ZrO2 interface that served as the methanol synthesis active center and acted as a bridge for transporting hydrogen from the active Cu species to ZrO2. In addition, the oxygen vacancies of ZrO2 promoted the adsorption and activation of CO2. These vacancies and Cu+ trapped in the ZrO2 lattice are the active sites for methanol synthesis from CO2 hydrogenation. The X-ray diffraction (XRD) patterns of the catalyst before and after reaction revealed the stability of its structure, which was further verified by time-on-stream (TOS) tests. Furthermore, in situ DRIFTS and temperature-programmed surface reaction-mass spectroscopy (TPSR-MS) revealed the reaction mechanism of CO2 hydrogenation to methanol, which followed an HCOO-intermediated pathway.

Cu@UiO-66 Derived Cu<SUP>+</SUP>-ZrO<sub>2</sub> Interfacial Sites for Efficient CO<sub>2</sub> Hydrogenation to Methanol

A highly efficient Cu/ZnOx/ZrO2 catalyst for selective CO2 hydrogenation to methanol

Inverse ZrO2/Cu as a highly efficient methanol synthesis catalyst from CO2 hydrogenation

Hollow structured Cu@ZrO<sub>2</sub> derived from Zr-MOF for selective hydrogenation of CO<sub>2</sub> to methanol

The Regulation of Cu-ZnO Interface by Cu-Zn Bimetallic Metal Organic Framework-Templated Strategy for Enhanced CO2 Hydrogenation to Methanol

Optimizing the Interfacial Environment of Triphasic ZnO-Cu-ZrO2 Confined Inside Mesoporous Silica Spheres for Enhancing CO2 Hydrogenation to Methanol

In Situ Generation of the Cu@3D-ZrOx Framework Catalyst for Selective Methanol Synthesis from CO2/H2

Hollow structured Cu@ZrO2 derived from Zr-MOF for selective hydrogenation of CO2 to methanol

Inverse Decoration Of Zno On Small-Sized Cu/Sio(2) With Controllable Cu-Zno Interaction For Co2 Hydrogenation To Produce Methanol

CO 2 Hydrogenation to Methanol Promoted by Cu and Metastable Tetragonal Ce X Zr Y O Z Interface

Insights into the interfacial structure of Cu/ZrO2 catalysts for methanol synthesis from CO2 hydrogenation: Effects of Cu-supported nano-ZrO2 inverse interface

Synthesis, characterization and activity pattern of Cu–ZnO/ZrO2 catalysts in the hydrogenation of carbon dioxide to methanol

Bimetallic Metal Organic Framework-Templated Synthesis of a Cu-ZnO/Al2O3 Catalyst with Superior Methanol Selectivity for CO2 Hydrogenation

Cu/ZnO/Al2O3 Catalyst Modulated by Zirconia with Enhanced Performance in CO2 Hydrogenation to Methanol

An Insight into Synergistic Metal-Oxide Interaction in CO2 Hydrogenation to Methanol over Cu/ZnO/ZrO2

Copper-zirconia interfaces in UiO-66 enable selective catalytic hydrogenation of CO2 to methanol

Engineering Cu plus /CeZrOx interfaces to promote CO2 hydrogenation to methanol

Synthesis of a Cu@ZnO1-x/Al2O3 Catalyst with High-Density ZnO1-x-Cu Interfacial Sites for Enhanced CO2 Hydrogenation to Methanol

Dual active sites over Cu-ZnO-ZrO2 catalysts for carbon dioxide hydrogenation to methanol

Modulation of Al2O3 and ZrO2 composite in Cu/ZnO-based catalysts with enhanced performance for CO2 hydrogenation to methanol

Understanding the Role of Cu/ZnO Interaction in CO2 Hydrogenation to Methanol