Abstract:Ti-6Al-4V alloy is applied in the production of jet engines and other aeronautical components. The Cr/CrN multilayer coating improves the wear, corrosion and oxidation properties of titanium alloys. However, the influence of hard coatings on fatigue properties needs to be investigated to ensure structural integrity. The present work aims to estimate the fatigue crack nucleation and propagation periods of a Cr/CrN coated Ti-6Al-4V alloy at high-stress and low-stress levels. The material used in this work was the Ti-6Al-4V alloy with an equiaxed microstructure and a yield strength of 1000 MPa. The coating was deposited through the DC sputtering method with 8 bilayers of chromium (Cr) and chromium nitride (CrN), achieving 16 layers and a total thickness of about 5 micrometers. Axial fatigue tests were performed at room temperature for the uncoated and coated titanium alloy. Scanning electron microscopy observation of the fracture surfaces showed that the cracks nucleated at the coating and propagated without deflections to the substrate. The Paris law was applied to estimate the fatigue crack propagation period of the Ti-6Al-4V alloy substrate, considering an initial crack with the size of the coating thickness. The results showed that the crack propagation period for the coated samples represented more than 90% of the fatigue life at the high-stress level of 1000 MPa, while it accounts only for about 1% of the fatigue life at the low-stress level of 700 MPa. The fatigue life debit of the Cr/CrN coated material with 8 bilayers and 5 micrometers can be attributed to the significant crack nucleation period reduction due to the brittle layers of CrN compared to the uncoated Ti-6Al-4V alloy. The detrimental coating effect was more substantial at the high-cycle fatigue regime when the crack nucleation period accounts for the majority of the fatigue life.

Benefit or Harm of Accident Tolerant Coatings on the Low-Cycle Fatigue Properties of Zr-4 Cladding Alloy: In-Situ Studies at 400°C

In-situ study on the microstructure and cracking behavior of annealed Cr coated Zr-4 alloy

Mechanical property and cracking mechanism of Cr-coated Zr alloy under tensile and compressive loading

Experimental evaluation of cold spray FeCrAl alloys coated zirconium-alloy for potential accident tolerant fuel cladding

Corrosion Degradation Mechanism of Cr-Coated Zr-4 Alloy under Simulated Nuclear Conditions for Accident-Tolerant Fuel

The high-temperature oxidation and mechanical properties of the Cr/Zr and CrN/Zr coating

Investigation on Microstructures and High-Temperature Oxidation Resistance of Cr Coatings on Zircaloy-4 by Multi-Arc Ion Plating Technology

Microstructure Evolution and Failure Mechanism of Cr-coated Zry-4 in Air and Steam at 1200 °C

Effect of Al content on high-temperature oxidation behavior and failure mechanism of CrAl-coated Zircaloy

High-Temperature Oxidation And Tensile Behaviors Of Cral Coating On Zirconium Alloy

Early-stage Diffusion and Oxidation Behavior of Cr-Nb Coated Zr Alloy Accident Tolerant Fuel Cladding Materials at 1200°C - 1500°C

On the chemical compatibility between Zr-4 substrate and well-bonded Cr2AlC coating

Diffusion and Oxidation Behavior of Cr-Zrn Coated Zr Alloy Accident Tolerant Fuel Cladding Materials at High Temperature

Microstructure, mechanical properties and corrosion behavior of AlxCrMoNbZr multiprincipal element alloy coatings for accident-tolerant fuel claddings: Effect of Al content

Xe20+ ions irradiation and autoclave corrosion coupled with steam oxidation behaviors of FeCrAlMoSiY-coated Zr claddings

Stress-sensitive fatigue crack initiation mechanisms of coated titanium alloy

Friction and Wear Properties of CrAl-Based Coatings for Nuclear Fuel Cladding

Low-cycle fatigue of MCrAlY-coated superalloys: a fracture mechanics-based analysis

Cr/CrN coating effect on the fatigue crack nucleation period of Ti-6Al-4V alloy

In-situ study on the tensile property and fracture behavior of Cr coating for nuclear fuel cladding

An Orthogonal Experimental Study on the Preparation of Cr Coatings on Long-Size Zr Alloy Tubes by Arc Ion Plating