Abstract:The combined application of steel–FRP composite bars (SFCBs) and seawater sea-sand concrete (SSSC) in marine engineering not only solves the problem of resource scarcity and reduces the construction cost but also avoids the problems of chloride corrosion of steel reinforcement in seawater sea-sand concrete and the lack of ductility of FRP bars. At the same time, the addition of glass fiber (GF) and expansion agent (EA) in appropriate amounts improves the crack resistance and seepage resistance of concrete. However, the durability of SFCB with GF- and EA-reinforced SSSC in freezing–thawing environment remains unclear, which limits its potential application in cryogenic marine engineering. This study investigates the bonding properties between SFCB and GF-EA-SSSC interfaces using eccentric pullout experiments under different thicknesses of concrete protective cover and a number of freezing–thawing cycles. The results showed that the compressive strength and dynamic elastic modulus of SSSC decrease, while the mass loss increases with an increasing number of freezing–thawing cycles. Additionally, the bond strength and stiffness between SFCB and SSSC decrease, leading to an increase in relative slip. However, the rate of bond strength and stiffness loss decreases with an increase in the thickness of the concrete protective cover. Furthermore, formulas for bond strength, relative slip, and bond stiffness are established to quantify the effects of the thickness of the concrete protective cover and the number of freezing–thawing cycles. The experimental values obtained verify the accuracy of these formulas, with a relative error of less than 5%. Moreover, a bond stress–slip constitutive model is developed for SFCB and GF-EA-SSSC, and the fitting results closely resemble the experimental values, demonstrating a high level of model fit.

Relationships Between Interfacial Behavior and Flexural Performance of Hybrid Steel-Frp Composite Bars Reinforced Seawater Sea-Sand Concrete Beams

Flexural Performance of Steel-Continuous-Fiber Composite Bar and Fiber-Reinforced Polymer Bar Hybrid-Reinforced Sustainable Sea-Sand Concrete Beams: Numerical and Theoretical Study

Flexural performance of FRP-SWSSC-steel composite beams: Experimental and analytical investigation

Simplified Implementation of Equivalent and Ductile Performance for Steel-Frp Composite Bars Reinforced Seawater Sea-Sand Concrete Beams: Equal-Stiffness Design Method

Seawater sea-sand concrete columns using durable and ductile steel-FRP composite bars and FRP ties: A promising hybrid scheme for marine engineering

Performance Improvement of a Fiber-Reinforced Polymer Bar for a Reinforced Sea Sand and Seawater Concrete Beam in the Serviceability Limit State

Flexural performance of concrete beams reinforced with steel–FRP composite bars

Bond-slip Behavior of the FRP Bar-Sea Sand Concrete Interface and Its Effect on the Finite Element Analysis of RC Beam

Shear Behavior of Concrete Beams Reinforced with Corrosion-Resistant and Ductile Longitudinal Steel-Frp Composite Bars and FRP Stirrups

Experimental Investigation on the Bond Performance of Sea Sand Coral Concrete with FRP Bar Reinforcement for Marine Environments

Durability of SFCB Reinforced Low-Alkalinity Seawater Sea Sand Concrete Beams in Marine Environment

Axial-flexural Performance of Columns Reinforced by Steel-Frp Composite Bars and FRP Ties

Effect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites

Bond Performance between Fiber-Wrapped Ribbed Basalt Fiber-Reinforced Polymer Bars and Seawater Sea-Sand Concrete

Study on Bond-Slip Behavior between Seawater Sea-Sand Concrete and Carbon Fiber-Reinforced Polymer (CFRP) Bars with Different Surface Shapes

Bond–Slip Performance of Steel–Fiber-Reinforced Polymer Composite Bars (SFCBs) and Glass Fiber with Expansion-Agent-Reinforced Seawater Sea-Sand Concrete (GF-EA-SSSC) under Freezing–Thawing Environment

Flexural property and design method evaluation of BFRP and steel bars hybrid reinforced concrete beams

Experimental Study of the Flexural Performance of GFRP-Reinforced Seawater Sea Sand Concrete Beams with Built-In GFRP Tubes

Interface Shear Stress of Concrete Beams Strengthened with FRP in Salt Water

Investigation on flexural behavior of steel-UHPC composite beams with steel shear keys

Interfacial Behavior and Debonding Failures of Full-Scale CFRP-strengthened H-section Steel Beams