Abstract:There are heat transfer correlations for heat transfer analysis in single tube geometries after several experimental and theoretical heat transfer studies in these single tube geometries. This is not the case for heat transfer analysis in rod bundle geometry with regard to proposed square fuel assembly of the Supercritical-Water-Cooled Reactor (SCWR) European Atomic Energy (EURATOM) design. Thus limited heat transfer studies exist on rod bundle geometry at supercritical pressures. Heat transfer correlations with accurate prediction capabilities of coolant and wall temperatures will be helpful in carrying out heat transfer studies at supercritical pressures. This paper presents the performance of twelve selected heat transfer correlations assessed on the 1/8th bare square fuel assembly of the SCWR EURATOM design using Simulation of Turbulent flow in Arbitrary Regions Computational Continuum Mechanics C ++ based code (STAR-CCM + CFD code). The obtained numerical results were compared with the results obtained by Waata numerical experimentation. Overall, the Cheng et al. correlation provided the most satisfying prediction for the wall temperatures in all the sub-channels and captured closely Wataa's Numerical data. The maximum wall temperature was obtained in sub-channel 9, the hottest sub-channel and exceeded the design limit 620 °C by 60 °C for the Cheng correlation. The difference in temperature between the hottest and coldest sub-channels 9 and 1 respectively was approximately 80 °C. It was found that Cheng correlation is best suited for heat transfer prediction in rod bundle geometry at supercritical pressures with regard to the proposed square fuel assembly of the SCWR EURATOM design. It was also found that the different numerical tools adopted for this study and Waata study were able to capture the trends of normal, enhanced and deteriorated heat transfer regimes normally observed at supercritical pressures. Nevertheless, experimental investigations involving rod bundles adopted in this study should be conducted to validate the results obtained numerically and address the inconsistency of the conclusions drawn when compared with Waata data and other similar studies.

Geometry Optimization for a Rectangular Corrugated Tube in Supercritical Water Reactors (scwrs) Using Alumina-Water Nanoﬂuid As Coolant

Investigation of Super-Critical Water-Based Nanofluid with Different Nanoparticles (shapes and Types) Used in the Rectangular Corrugated Tube of Reactors

Sensitivity analysis of geometrical parameters of supercritical water in twisted spiral tubes

Optimization of the Fuel Rod's Arrangement Cooled by Turbulent Nanofluids Flow in Pressurized Water Reactor(pwr)

Enhancing Thermal–Hydraulic Performance in Nuclear Reactor Subchannels with Al2O3 Nanofluids: A CFD Analysis

Numerical Analysis of Supercritical Water Heat Transfer in Horizontal Circular Tube

Numerical study of the effects of geometric parameters and nanofluid properties on heat transfer and pressure drop in helical tubes

Assessment of heat transfer correlations in the sub-channels of proposed rod bundle geometry for supercritical water reactor

Numerical study of heat transfer and fluid flow of supercritical water in twisted spiral tubes

Numerical Study on the Thermohydraulics of Near-Critical Water in Rod Bundle with Spacer Grids

Hydraulic Resistance of In-Tube Cooling Supercritical Water Accompanying Out-Tube Pool Boiling

Geometry Optimization for Supercritical Water Heat Transfer Enhancement in Non-Uniformly Heated Rifled Tubes

Fluid-to-fluid Scaling of Heat Transfer in Circular Tubes Cooled with Supercritical Fluids

Numerical Analysis of Supercritical Water Heat Transfer in Vertical Tube with Different Obstacles

Numerical Verifications on Heat Transfer to Supercritical Water Flowing Upward in a 4-m Long Bare Vertical Tube

Configuration and Optimization of a Minichannel Using Water–Alumina Nanofluid by Non-Dominated Sorting Genetic Algorithm and Response Surface Method

NUMERICAL INVESTIGATION ON HEAT TRANSFER TO SUPERCRITICAL WATER FLOWING UPWARD IN A 4-M LONG BARE VERTICAL CIRCULAR TUBE

Shell and tube heat exchanger thermal-hydraulic analysis equipped with baffles and corrugated tubes filled with non-Newtonian two-phase nanofluid

Numerical Investigation on the Heat Transfer Characteristics of Supercritical Water in a Non-Uniformly Heated Tube for a Supercritical CFB Boiler

Numerical Simulation on Natural Convection and Heat Transfer of Supercritical Water in a Side-wall Heated Cylinder

Experimental study on heat transfer in vertical cooling tube cooled by downward flow in the passive heat removal system of SCWR