Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

Enhancement of Condensation Heat Transfer, Anti-Frosting and Water Harvesting by Hybrid Wettability Coating

Defect-Density-Controlled Phase-Change Phenomena.

Enhanced Moisture Condensation on Hierarchical Structured Superhydrophobic–Hydrophilic Patterned Surfaces

A Simple Way to Achieve Bioinspired Hybrid Wettability Surface with Micro/nanopatterns for Efficient Fog Collection

Microdrop-Assisted Microdomain Hydrophilicization of Superhydrophobic Surfaces for High-Efficiency Nucleation and Self-Removal of Condensate Microdrops

Metallic Hierarchical Structures Uniformly Covered with WC@PDMS Composite Coatings Toward Comprehensively Durable Superhydrophobic Surfaces

Spraying Fabrication of Durable and Transparent Coatings for Anti-Icing Application: Dynamic Water Repellency, Icing Delay, and Ice Adhesion

Anti-Corrosion Superhydrophobic Micro-Gf/Micro-Tib2/Nano-Sio2 Based Coating with Braid Strengthening Structure Fabricated by a Single-Step Spray Deposition

Sprayed Hieratical Biomimetic Superhydrophilic-Superhydrophobic Surface for E Fficient Fog Harvesting

Development of a hybrid anti-icing coating with superhydrophobic and electrothermal properties

A superhydrophobic coating harvesting mechanical robustness, passive anti-icing and active de-icing performances

Ecofriendly fabrication of superhydrophobic coating with high chemical/mechanical durability and enhanced heat resistance by 1D/2D hybridization strategy

Heat Stability and Icing Delay on Superhydrophobic Coatings in Facile One Step

A Novel Superhydrophobic Hybrid Nanocomposite Material Prepared by Surface-Initiated Aget Atrp and Its Anti-Icing Properties

One-step spraying route to construct a bio-inspired, robust, multi-functional and superhydrophobic coatings with corrosion resistance, self-cleaning and anti-icing properties

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

Durable superhydrophobic surface with hierarchical microstructures for efficient water collection

Improving Anti-frosting Performance for Super-hydrophobic Nanocomposite Coatings

Competing Effects Between Condensation and Self-Removal of Water Droplets Determine Antifrosting Performance of Superhydrophobic Surfaces.

Mechanisms of metal wettability transition and fabrication of durable superwetting/superhydrophilic metal surfaces

Multifunctional Superwetting Composite Coatings for Long‐Term Anti‐Icing, Air Purification, and Oily Water Separation