Abstract:Superwettability can affect the performance of oil separation from water during the treatment of oily wastewater. Among various types of materials developed for cleaning oil pollution, foam is a popular choice due to its attractive lightweight properties and adjustable porosities. Foams with superwetting surfaces (superhydrophilic/superoleophobic underwater) are ideal for oil/water separations. In this study, lignin-based polyurethane foams (LPUFs) were synthesized first, and then polydopamine particles were deposited on the surface of the foam by in situ polymerization under weak alkaline conditions to increase its surface roughness. Afterwards, phytic acid was used to modify the foam to achieve surface superhydrophilicity and underwater superoleophobicity. Successful loading of polydopamine (PDA) particles and coating of phytic acid (PA) onto the foam was demonstrated by SEM, EDS, FTIR, XPS, and thermogravimetric analysis measurements. It was shown in the cyclic compression tests that LPUFs had good mechanical properties. Under 75 % compression strain, the maximum stress in the first cycle of LPUF/PDA/PA was 105.92 kPa. After 30 cyclic compression tests, the maximum stress of LPUF/PDA/PA under 75 % compression strain was 105.63 kPa, demonstrating a high mechanical stability. The contact angle of the foam modified by PDA and PA was 0° for water, 166.7° for chloroform, and 158.4° for hexane, which also demonstrated excellent underwater anti-oil adhesion performances. Oil-water separation tests by using PDA and PA modified lignin-based foam with mixtures of water and n -hexane, cyclohexane, toluene, and pump oil indicated a separation efficiency of over 99 % for the types of mixtures tested together with excellent repeatability. In addition, the PDA and PA modified lignin-based foams were able to adsorb 67.1 mg/g of methylene blue, 96.1 mg/g of rhodamine B, and 98.2 mg/g of copper sulfate. The lignin-based foam could completely degrade under weak alkaline conditions after usage. This study highlighted a novel strategy for synthesizing environmentally friendly high-performance adsorbents to efficiently treat polluted wastewater using lignin as a raw material.

Degradable Superhydrophilic Iron‐Pillared Bentonite Doped with Polybutylene Adipate/Terephthalate Open‐Cell Foam: Its Application in Dye Degradation, Removal of Heavy Metal Ions, and Oil–Water Separation

Designing MOFs/CuCo-LDHs Hybrid-Based Superhydrophobic Sponge for Speedy Eliminating Microplastics, Dyes, and Oils from High-Salinity Water

Multifunctional poly-(Acrylamide-acrylic acid)/sesbania gum/bentonite hydrogel composite for removal of methylene blue and malachite green dyes from water

Multifunctional superhydrophilic/underwater superoleophobic lignin-based polyurethane foam for highly efficient oil-water separation and water purification

Superior dye degradation and adsorption capability of polydopamine modified Fe3O4-pillared bentonite composite

Bio-based adsorption foam composed of MOF and polyethyleneimine-modified cellulose for selective anionic dye removal

Fabrication porous adsorbents templated from aqueous foams using astragalus membranaceus and attapulgite as stabilizer for efficient removal of cationic dyes

Eco-friendly and multifunctional superhydrophilic and underwater superoleophobic materials with adsorption, photodegradation and oil-water separation properties

Floating-separation adsorbent for methylene blue and Pb(II) removal: Structure construction and adsorption mechanism

Brushing a superhydrophilic cross-linked coating on the metal mesh for dye separation

Versatile superhydrophobic bismuth molybdate cotton fabric for oil/water separation and decompose dyestuff

Multifunctional lignin-reinforced cellulose foam for the simultaneous removal of oils, dyes, and metal ions from water

Facile preparation of polyurethane sponge decorated with polydopamine/BiVO 4 for dye photocatalytic degradation under visible light and oil–water separation

Synthesis and application of dual-functional sorbent SBA-15-Fe 3 O 4 -PDA-ODA for removing both water soluble and insoluble pollutants

Carboxylate-functionalized hollow polymer particles modified polyurethane foam for facile and selective removal of cationic dye

Polyacrylic acid functionalized superparamagnetic iron-oxide supraparticles for highly efficient adsorption and removal of contaminants from water

Co-adsorption and selective-adsorption of heavy metals and dyes from aqueous solution by bio-based humus/chitosan hydrogels

Floating 3D-PDMS-Iron oxide molecular baskets for decontaminating diverse pollutants and analyzing structural composition impacts

Preparation of superhydrophobic polyurethane sponge with photodegradation function and study on its oil-water separation performance

Efficient and sustainable treatment of anionic dye wastewaters using porous cationic diatomite

Fe-pillared montmorillonite functionalized chitosan/gelatin foams for efficient removal of organic pollutants by integration of adsorption and Fenton degradation