Synthesis, Structure Elucidation and Functionalization of Sulfonamide [2]Catenanes

Yu Wang,Shuai Lu,Xu-Qing Wang,Yan-Fei Niu,Heng Wang,Wei Wang

DOI: https://doi.org/10.1039/d1qo00691f

IF: 5.456

2021-01-01

Organic Chemistry Frontiers

Abstract:A pyrene-functionalized [2]catenane with switchable optical output was constructed through a novel sulfonamide [2]catenane synthesized by a self-templation approach.

What problem does this paper attempt to address?

An Octacationic [2]catenane Formed by Oxime Condensation: A Bistable Molecular Switch

Cai-Yun Wang,Guangcheng Wu,Jiaqi Zhu,Tianyu Jiao,Yang Zhang,Hao Li

DOI: https://doi.org/10.1002/cplu.201900668

2019-01-01

ChemPlusChem

Abstract:Oxime condensation as well as template-directed synthesis based on radical-pairing interactions were used in the synthesis of an octacationic [2]catenane in 20 % yield. The [2]catenane consists of two identical mechanically interlocked tetracationic macrocyclic components. Each of the ring components contains two dicationic bipyridinium (BIPY2+) functions. The structure of the [2]catenane was fully characterized by NMR spectroscopy, mass spectrometry, as well as X-ray crystallography. In the oxidized state, the [2]catenane exists in a co-conformation where its four BIPY2+ units are located as far as possible from each other. Upon reduction of BIPY2+ into the radical state, namely BIPY+., we propose that the [2]catenane undergoes mechanical movement, driven by radical pairing interactions between these radical building blocks. The redox-stimulated switching behavior of this [2]catenane was confirmed by electrochemistry, UV-Vis-NIR absorption spectroscopy, and H-1 NMR spectroscopy.
Template Assisted Synthesis of Linear [5]Catenane by Post‐Functionalization of Templated [2]Catenane and Using Click Reaction

Mana Bhanjan Podh,Radhakrishna Ratha,Chandra Shekhar Purohit

DOI: https://doi.org/10.1002/asia.202400351

2024-05-05

Chemistry - An Asian Journal

Abstract:Polymers with all mechanically interlocked rings, such as linear [n]catenanes, have great potential as functional materials due to possible higher degrees of freedom that may contribute to their flexibility but remain elusive. All the synthetic methods used to prepare such a polymer yield mixtures of products. In the absence of higher molecular weight linear [n]catenanes, emphasis on synthesizing low molecular weight oligomers is being pursued. Here, we have described the synthesis of a linear [5]catenane by post‐functionalizing a Co(III) templated [2]catenane having a pyridine‐diamide unit free for further metal ion coordination. Two molecules were synthesized with suitable threading groups: one, two terminal azide groups, and two, with two terminal alkyne groups to form two [3]pseudorotaxane utilizing Co(III) coordination. These units were then joined, forming a macrocycle, using click reaction, giving the desired metallated linear [5]catenane in 40% yield. Removal of metal ions leads to linear [5]catenane. In addition, the formation of linear [3] and [2]catenane are also observed. All synthesized structures have been isolated by column chromatographic technique and characterized by 1H‐NMR, 13C‐NMR, and mass spectroscopy.

chemistry, multidisciplinary
Synthesis of [60]Fullerene-Fused Tetrahydroazepinones and Azepinonimines Via Cu(OAc)2-promoted N-heteroannulation Reaction.

Tong-Xin Liu,Zhenbei Zhang,Qingfeng Liu,Pengling Zhang,Penghao Jia,Zhiguo Zhang,Guisheng Zhang

DOI: https://doi.org/10.1021/ol500028w

IF: 5.2

2014-01-01

Organic Letters

Abstract:A convenient and efficient Cu(OAc)2-mediated N-heteroannulation reaction of [60]fullerene with N-sulfonylated o-amino-aromatic methyl ketones or O-alkyl oximes has been reported for the synthesis of novel and scarce [60]fullerene-fused tetrahydroazepinones and -azepinonimines in a highly selective manner. Moreover, a possible mechanism involving two pathways is proposed on the basis of the experimental observations.
A pyridine- N -oxide catenane for cation recognition

Sean R Barlow,Nathan R Halcovitch,Nicholas H Evans,Sean Richard Barlow,Nathan Ross Halcovitch,Nicholas Henley Evans

DOI: https://doi.org/10.1039/d4ob00176a

2024-03-23

Organic & Biomolecular Chemistry

Abstract:The rapid preparation of a pyridine- N -oxide containing [2]catenane is described. The [2]catenane was characterized by NMR spectroscopy, mass spectrometry and X-ray single crystal structure determination. 1 H NMR titration experiments reveal the [2]catenane may be reversibly protonated, as well as an ability to bind lithium cations more strongly than sodium cations.

chemistry, organic
A Rapid and Effective Synthetic Route to Functional Cuboctahedron Nanospheres

Zhide Chen,Yuping Gai,Wenshuo Xie,Hua Guo,Wei Deng,Fengchun Li,Fei Jiang

DOI: https://doi.org/10.1016/j.jssc.2021.122385

IF: 3.3

2021-01-01

Journal of Solid State Chemistry

Abstract:Multiferrocenyl and multiadamantyl cuboctahedron nanospheres were synthesized via rapid self-assembly reactions of twelve 90 degrees Pd-II-containing compounds and twenty-four 120 degrees organic bidentate N-ligands in acetone solution. The selected self-assembly reaction and corresponding solvent were demonstrated to be effective and simple in the preparation of self-assembled nanospheres. DOSY NMR spectroscopy, AFM images and theoretical calculations confirmed the formation of cuboctahedron complexes with the size of 4-5 nm. Multifunctional molecular self-assembly processes offer considerable synthetic advantages including significantly fewer steps, fast and facile formation of final desirable products, and will lead to a new multifunctionality platform for cuboctahedron complexes.
Synthesis of a [2]catenane by ring closing metathesis of a [2]rotaxane prepared by crown ether active templation

Sean Richard Barlow,Nicholas Henley Evans

DOI: https://doi.org/10.1039/d4ob01028k

2024-09-04

Organic & Biomolecular Chemistry

Abstract:The high yielding synthesis and spectral characterization of a [2]catenane prepared by Grubbs catalyzed ring closing metathesis of a [2]rotaxane prepared by crown ether active template synthesis is described.

chemistry, organic
Ring-in-Ring Assembly Facilitates the Synthesis of a Cyclopara-phenylene Hetero[3]Catenane

Youzhi Xu,Wudi Shi,Yaning Hu,Luigi Leanza,Yevhenii Shchukin,Patrick A. Hoffmann,Menghua Li,Chengbing Ning,Zhong-Yan Cao,Yuanqing Xu,Pingwu Du,Max von Delius,Giovanni M. Pavan

DOI: https://doi.org/10.26434/chemrxiv-2024-9xjl6

2024-10-17

Abstract:Cycloparaphenylenes (CPPs) represent a significant challenge for the synthesis of mechanically interlocked architectures, because they lack heteroatoms, which precludes traditional active and passive template methods. To circumvent this problem and explore the fundamental and functional properties of CPP rotaxanes and catenanes, researches have resorted to unusual non-covalent and even to labor-intensive covalent template approaches. Herein, we report a ring-in-ring non-covalent template strategy that makes use of the surprisingly strong non-covalent inclusion of crown ethers into suitably sized CPPs. By threading a secondary ammonium salt through the crown ether and closing the third ring via Cu-AAC click reaction, we obtained a hetero-[3]catenane comprising [12]CPP, 24-crown-8 and a dibenzylammonium macrocycle. X-ray crystallography shed light on the ring-in-ring pre-organization and the [3]catenane topology was confirmed by NMR and MS-MS studies. Molecular simulations provided insights into the intriguing ring-vs.-ring-vs.-ring dynamics of the [3]catenane, which are highly dependent on the protonation state of the dibenzylammonium site. This ring-in-ring assembly strategy opens new avenues for the synthesis of complex CPP architectures and their use in functional supramolecular systems.

Chemistry
A [2]catenane and Pretzelane Based on Sn-Porphyrin and Crown Ether

Min Han,Heng-Yi Zhang,Li-Xu Yang,Zhi-Jun Ding,Rui-Jie Zhuang,Yu Liu

DOI: https://doi.org/10.1002/ejoc.201101145

IF: 3.261

2011-01-01

European Journal of Organic Chemistry

Abstract:A [2]catenane and a pretzelane that consist of one aromatic dialkylammonium spacer, one dibenzo-24-crown-8 (DB24C8) unit, and one Snporphyrin dihydroxide component were synthesized. In the [2]catenane, dibenzo-24-crown-8 and the Snporphyrin dihydroxide are two independent components, whereas in the pretzelane, dibenzo-24-crown-8 and the Snporphyrin dihydroxide are linked covalently. The interlocked molecules were obtained by the axial ligation of Snporphyrin dihydroxide with the resorcinol moieties of both termini in the aromatic dialkylammonium spacer.
A Bistable [2]catenane Switched by Hetero-Radical Pairing Interactions.

Yang Zhang,Qiong Chen,Yan Wang,Xujun Zheng,Haiying Wang,Fahe Cao,Andrew C-H Sue,Hao Li

DOI: https://doi.org/10.1039/d0cc02012e

IF: 4.9

2020-01-01

Chemical Communications

Abstract:A bistable [2]catenane composed of a tetracationic cyclophane, namely cyclobis(paraquat-p-phenylene) (CBPQT4+) that is mechanically interlocked by a neutral macrocylic component containing both a 1,5-dioxynaphthalene (DNP) and a naphthalene-1,4,5,8-bis(dicarboximide) (NDI) unit, was obtained by using template-directed synthesis via click chemistry. In the fully oxidized state, the CBPQT4+ component encircles the DNP unit, driven by donor-acceptor interactions. Upon reduction of both the CBPQT4+ ring and the NDI unit, the CBPQT2(˙+) ring undergoes shuttling and resides on the NDI˙- station, driven by coulombic-enhanced spin-pairing interactions between different aromatic radicals.
Visible-Light-Mediated Dual Functionalization of Allenes: Regio- and Stereoselective Synthesis of Vinylsulfone Azides.

Houqi Guo,Xin Ruan,Zekun Xu,Kai Wang,Xiang Li,Jun Jiang

DOI: https://doi.org/10.1021/acs.joc.3c02515

2023-01-01

Abstract:A gentle and effective method for the photocatalytic dual functionalization of allenes with high regio- and stereoselectivity using a nonmetallic catalyst is described. Inexpensive and easily available sulfinates and TMSN3 were employed as sulfone and azido sources, respectively. The method is characterized by satisfactory substrate compatibility and tolerance toward functional groups. The straightforward initial mechanistic experiments suggested that the reaction could follow a radical pathway. The synthesis of vinylsulfone azide derivatives presented here offers a promising scaffold for the future development of vinyl sulfone-based drugs and functional bioorthogonal reagents.
Oligo[2]catenane That Is Robust at Both the Microscopic and Macroscopic Scales

Ruixue Bai,Zhaoming Zhang,Weishuai Di,Xue Yang,Jun Zhao,Hao Ouyang,Guoquan Liu,Xinhai Zhang,Lin Cheng,Yi Cao,Wei Yu,Xuzhou Yan

DOI: https://doi.org/10.1021/jacs.3c00221

IF: 15

2023-04-14

Journal of the American Chemical Society

Abstract:Polycatenanes are extremely attractive topological architectures on account of their high degrees of conformational freedom and multiple motion patterns of the mechanically interlocked macrocycles. However, exploitation of these peculiar structural and dynamic characteristics to develop robust catenane materials is still a challenging goal. Herein, we synthesize an oligo[2]catenane that showcases mechanically robust properties at both the microscopic and macroscopic scales. The key feature of...

chemistry, multidisciplinary
Selective Construction and Structural Transformation of Homogeneous Linear Metalla[4]catenane and Metalla[2]catenane Assemblies

Wei-Long Shan,Huan-Huan Hou,Nian Si,Cai-Xia Wang,Guozan Yuan,Xiang Gao,Guo-Xin Jin

DOI: https://doi.org/10.1002/anie.202402198

2024-02-07

Angewandte Chemie International Edition

Abstract:Although the synthesis of mechanically interlocked molecules has been extensively researched, selectively constructing homogeneous linear [4]catenanes remains a formidable challenge. Here, we selectively constructed a homogeneous linear metalla[4]catenane in a one-step process through the coordination-driven self-assembly of a bidentate benzothiadiazole derivative ligand and a binuclear half-sandwich rhodium precursor. The formation of metalla[4]catenanes was facilitated by cooperative interactions between strong sandwich-type π-π stacking and non-classical hydrogen bonds between the components. Moreover, by modulating the aromatic substituents on the binuclear precursor, two homogeneous metalla[2]catenanes were obtained. The molecular structures of these metallacatenanes were unambiguously characterized by single-crystal X-ray diffraction analysis. Additionally, reversible structural transformation between metal-catenanes and the corresponding metallarectangles could be achieved by altering their concentration, as confirmed by mass spectrometry and NMR spectroscopy studies.

chemistry, multidisciplinary
Synthesis and Structure of a Novel Disulfide-Containing Aniline

Hao Deng,Shi-Ren,Kan Wu,Chi‐Un Lei,Hong Wang,Dan Hao,Quan Zhou,Qing Li,Zao-ying

2004-01-01

Abstract:A novel disulfide-containing aniline, 8-dihydro-1H,4H-2,3,6,7-tetrathia-anthracen-9-ylamine (5) was synthesized.The single-crystal X-ray analysis of 4 indicates that the molecular has a non-planar structure, with its four sulfur atoms out of the plane of benzene ting. The designed molecular has the advantage of high theoretic specific capacity and reversibility,[1,2] when it is to be polymerized and used as the cathode material of the secondary lithium batteries.……
Selective Construction of Molecular Borromean Rings and [2]catenane Utilizing Ether Bipyridyl Ligands

Xin Yi,Hai-Ning Zhang,Yue-Jian Lin,Guo-Xin Jin

DOI: https://doi.org/10.1002/chem.202204038

2023-01-01

Chemistry - A European Journal

Abstract:A series of Cp* Rh-based discrete architectures was constructed by selecting four ether bipyridyl ligands and three half-sandwich rhodium(III) bimetallic construction units, respectively. This study demonstrates a strategy for making the transition from a binuclear D-shaped ring to a tetranuclear [2]catenane by adjusting the length of bipyridyl ligands. In addition, changing the position on the naphthyl group of the bipyridyl ligand from 2,6- to 1,5-position substitution can realize the selective synthesis of [2]catenane and Borromean rings under similar conditions. The above-mentioned constructions have been determined via X-ray crystallographic analysis, detailed NMR techniques, electrospray ionization-time-of-flight/mass spectrometry analysis, and elemental analysis.
An “All-in-One” Synthetic Strategy for Linear Metalla[4]Catenanes

Ye Lu,Dong Liu,Yue-Jian Lin,Zhen-Hua Li,F. Ekkehardt Hahn,Guo-Xin Jin

DOI: https://doi.org/10.1021/jacs.1c06689

IF: 15

2021-08-02

Journal of the American Chemical Society

Abstract:One fascinating and challenging synthetic target in the field of mechanically interlocked molecules is the family of linear [4]catenanes, which are topologically identical to the logo of automobile maker Audi. Herein, we report an "all-in-one" synthetic strategy for the synthesis of linear metalla[n]catenanes (n = 2–4) by the coordination-driven self-assembly of Cp*Rh-based (Cp* = η5-pentamethylcyclopentadienyl) organometallic rectangle π-donors and tetracationic organic cyclophane π-acceptors. We selected the pyrenyl group as the π-donor unit, leading to homogeneous metalla[2]catenanes and cyclic metalla[3]catenanes via π-stacking interactions. By taking advantage of the strong electrostatic interactions between π-donor units and π-acceptor units, a heterogeneous metalla[2]catenanes and linear metalla[3]catenanes, respectively, could be obtained by the simple stirring of homogeneous metalla[2]catenanes with a suitable tetracationic cyclophane. On this basis, this "all-in-one" synthetic strategy was further used to realize a quantitative one-step synthesis of a linear metalla[4]catenanes via the self-assembly of cyclic metalla[3]catenanes and tetracationic cyclophanes. All heterogeneous metalla[n]catenanes (n = 2–4) were fully characterized by single-crystal X-ray analysis, NMR spectroscopy and electrospray ionization mass spectrometry.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/jacs.1c06689.Experimental details, additional structure figures, NMR and ESI-MS spectra, and X-ray crystallography details (PDF)This article has not yet been cited by other publications.

chemistry, multidisciplinary
Template Assisted One‐Pot Synthesis of [2], Linear [3], and Radial [4]Catenane via Click Reaction

Mana Bhanjan Podh,Radhakrishna Ratha,Chandra Shekhar Purohit

DOI: https://doi.org/10.1002/asia.202400031

2024-02-21

Chemistry - An Asian Journal

Abstract:Design and synthesis of higher order catenane are unexpectedly complex and involve precise cooperation among the precursors overcoming competing and opposing interactions. We achieved synthesis of [2], linear [3], radial [4] in a one‐pot reaction by consecutive ring closing through click reactions. This synthesis gave three isolable products due to two, four, and six‐click reactions between suitable coupling partners. Yields of the isolate templated‐catenane decrease from lower to higher‐ordered catenane (40%, 12%, and 4%), probably due to the bite angle as well as the flexibility of the reacting partners. Removal of templating cobalt(III) ion leads to the formation of fully organic [2], linear [3], and radial [4]catenane. These synthesized catenanes were purified by column chromatography and characterized by 1H‐NMR, 13C‐NMR, and ESI‐MS spectroscopy. The synthesized catenanes have free binding sites suitable for post‐functionalization and may be used for the synthesis of higher‐ordered catenane.

chemistry, multidisciplinary
Stereoselective Construction of Chiral Linear [3]Catenanes and [2]Catenanes

Zheng Cui,Qiu-Shui Mu,Xiang Gao,Guo-Xin Jin

DOI: https://doi.org/10.1021/jacs.2c12027

IF: 15

2022-12-24

Journal of the American Chemical Society

Abstract:We have successfully constructed a chiral linear [3]catenane stereoselectively by coordination-driven self-assembly using a ditopic monodentate ligand containing l-valine residues with a binuclear half-sandwich organometallic rhodium(III) unit. Furthermore, by increasing the steric hindrance of the amino acid residues in the ligand, a chiral [2]catenane was obtained, which can be regarded as the factor catenane of the chiral linear [3]catenane from a topological viewpoint. Notably, the resulting...

chemistry, multidisciplinary
Ordered [2]catenanes in Covalent Organic Frameworks: from Molecules to Materials

Ruozhou Huang,Yuping Wang

DOI: https://doi.org/10.1016/j.chempr.2024.10.024

IF: 23.5

2024-01-01

Chem

Abstract:In a recent issue of Chem, an innovative approach for the synthesis of crystalline [2]catenane-containing covalent organic frameworks was developed. This breakthrough elucidates how the dynamics of microscopic, interlocked components influence material properties, thereby advancing the design of two-dimensional materials with sophisticated topological features.
Stimuli Induced Reversible Switching Between a Self‐assembled 2‐Catenane and the Constituent Coordination Rings

Raveena Soni,Devjanee Bardhan,Shobhana Krishnaswamy,Dillip Kumar Chand

DOI: https://doi.org/10.1002/chem.202403837

2024-11-28

Chemistry - A European Journal

Abstract:A pair of comparable sized C‐shaped bis‐monodentate ligands (L1 and L22+) and a linear bis‐monodentate ligand (L3) complimenting to the terminal‐lengths of the C‐shaped ligands have been identified. One‐pot combination of cis‐Pd(tmeda)2+, L1 and L3 (2:1:1 ratio) in water resulted an octa‐cationic 2‐catenane, [Pd2(tmeda)2(L1)(L3)]28+ in which two identical tetra‐cationic macromonocyclic coordination rings are interlocked; however, a guest bound coordination ring was formed in presence of a selected di‐anionic guest. Complexation of cis‐Pd(tmeda)2+ with a mixture of L22+ and L3 (2:1:1 ratio) in water resulted the hexa‐cationic macromonocyclic coordination ring, [Pd2(tmeda)2(L2)(L3)]6+ whereas a guest bound coordination ring was formed in the presence of the di‐anionic guest. Addition of the guest to the preformed octa‐cationic catenane caused ring separation to favour the guest‐bound ring. This guest bound ring could be reverted to the 2‐catenane by sequestering the bound guest using the relatively electron deficient hexa‐cationic coordination ring. Thus, a design principle for reversible switching between a 2‐catenane and the constituent macromonocyclic‐rings using anion‐binding/‐sequestering as the core concept has been established.

chemistry, multidisciplinary
Dynamic control of circumrotation of a [2]catenane by acid‐base switching

Kelun Shi,Guohui Jia,Ying Wu,Shilong Zhang,Jiawen Chen

DOI: https://doi.org/10.1002/open.202300304

2024-02-11

ChemistryOpen

Abstract:We reports a mechanical interlocking donor‐acceptor [2]catenane, which is able to form varying degrees of self‐complexed or decomplexed compounds that alter the cavity size of the crown ether and affecting the circumrotation behavior of CBPQT ⋅ 4PF6 ring of the catenane. Dynamic control of the motion in a catenane remains a big challenge as it requires precise design and sophisticated well‐organized structures. This paper reports the design and synthesis of a donor‐acceptor [2]catenane through mechanical interlocking, employing a crown ether featuring two dibenzylammonium salts on its side arms as the host and a cyclobis(paraquat‐p‐phenylene) (CBPQT ⋅ 4PF6) ring as the guest molecule. By addition of external acid or base, the catenane can form self‐complexed or decomplexed compounds to alter the cavity size of the crown ether ring, consequently affecting circumrotation rate of CBPQT ⋅ 4PF6 ring of the catenane. This study offers insights for the design and exploration of artificial molecular machines with intricate cascading responsive mechanisms.

chemistry, multidisciplinary

Synthesis, Structure Elucidation and Functionalization of Sulfonamide [2]Catenanes

An Octacationic [2]catenane Formed by Oxime Condensation: A Bistable Molecular Switch

Template Assisted Synthesis of Linear [5]Catenane by Post‐Functionalization of Templated [2]Catenane and Using Click Reaction

Synthesis of [60]Fullerene-Fused Tetrahydroazepinones and Azepinonimines Via Cu(OAc)2-promoted N-heteroannulation Reaction.

A pyridine- N -oxide catenane for cation recognition

A Rapid and Effective Synthetic Route to Functional Cuboctahedron Nanospheres

Synthesis of a [2]catenane by ring closing metathesis of a [2]rotaxane prepared by crown ether active templation

Ring-in-Ring Assembly Facilitates the Synthesis of a Cyclopara-phenylene Hetero[3]Catenane

A [2]catenane and Pretzelane Based on Sn-Porphyrin and Crown Ether

A Bistable [2]catenane Switched by Hetero-Radical Pairing Interactions.

Visible-Light-Mediated Dual Functionalization of Allenes: Regio- and Stereoselective Synthesis of Vinylsulfone Azides.

Oligo[2]catenane That Is Robust at Both the Microscopic and Macroscopic Scales

Selective Construction and Structural Transformation of Homogeneous Linear Metalla[4]catenane and Metalla[2]catenane Assemblies

Synthesis and Structure of a Novel Disulfide-Containing Aniline

Selective Construction of Molecular Borromean Rings and [2]catenane Utilizing Ether Bipyridyl Ligands

An “All-in-One” Synthetic Strategy for Linear Metalla[4]Catenanes

Template Assisted One‐Pot Synthesis of [2], Linear [3], and Radial [4]Catenane via Click Reaction

Stereoselective Construction of Chiral Linear [3]Catenanes and [2]Catenanes

Ordered [2]catenanes in Covalent Organic Frameworks: from Molecules to Materials

Stimuli Induced Reversible Switching Between a Self‐assembled 2‐Catenane and the Constituent Coordination Rings

Dynamic control of circumrotation of a [2]catenane by acid‐base switching